• Smart Structures and Systems
• /
• 제7권2호
• /
• pp.103-116
• /
• 2011

This paper is concerned with the trajectory tracking and vibration suppression of a single-link flexible arm by using piezoelectric materials. The dynamics of a single flexible arm with PZT patches as sensor and actuator is derived using extended Hamilton's principle. Resulting equations show that the coupled beam dynamics including beam vibration and its rigid in-plane rotation takes place in two different time scales. By using singular perturbation theory, the system dynamics is divided into two subsystems. Then, a composite control scheme is elaborated that makes the orientation of the arm track a desired trajectory while suppressing its vibration. The proposed controller has two parts: one is a tracking controller designed for the slow (rigid) subsystem, and the other one is a stabilizing controller for the fast (flexible) subsystem. The outputs considered for the system are angular position of the hub and voltage of the sensor mounted on the structure. To avoid requiring further measurements of beam vibration and also angular velocity of the hub for the fast and slow control laws, respectively, two sliding mode observers for estimating the unknown states are also designed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1269-1272
• /
• 1996

Several input shaping techniques are suggested to reduce the vibration of a flexible manipulator. The theories of typical 4 methods(Singer, Tuttle, Feddema, Zuo) are explained and are tested by the experiment of one link flexible manipulator. Zuo's method is the best of all with respect to its robustness.

• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.595-600
• /
• 2015

전통적인 midway 광 위상 공액기 (OPC; optical phase conjugator)가 아닌 non-midway OPC를 분산 제어 (DM; dispersion-managed) 광전송 링크에 적용하여 파장 분할 다중 전송 (WDM; wavelength division multiplexed)을 위한 융통적인 네트워크의 구성 가능성을 분석하였다. 중계 구간의 수가 많을수록, 또한 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 클수록 non-midway OPC를 통한 유연한 링크의 구성 가능성이 커지는 것을 확인하였다. 아울러 OPC 이후의 후반 전송 구획을 구성하는 각 중계 구간의 RDPS를 OPC 이전의 전반 구획의 RDPS의 평균값으로 설정하는 링크 구조가 융통적 링크 구성에 더욱 유리하다는 것을 확인하였다.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.643-650
• /
• 2017

최근에 유연관절로봇의 제어는 로봇시스템에 있어서 다양한 적용가능성이 증가하고 있기 때문에 점점 그 중요성이 커지고 있다. 본 논문에서는 유연관절로봇의 제어에 있어서 적분슬라이딩모드제어기와 백스테핑제어기법을 도입하여 강인성을 증가시키는 방법을 제안한다. 슬라이딩모드제어기를 사용하여 강인성을 향상시키기 위해서는 제어대상이 정합조건을 만족시켜야 하는데 유연관절로봇은 이 조건을 만족시키지 못한다. 유연관절로봇은 링크측과 모터측으로 나누어 생각할 수 있고 각 측에 외란이 존재하나 실제입력은 모터측에 존재하기 때문에 링크측 외란은 정합조건을 만족시킬 수 없으므로 슬라이딩모드제어기로 제거하기가 어렵다. 이에 본 논문에서는 백스테핑을 도입하여 이러한 비정합 문제를 해결함으로써 링크측 외란의 영향을 제거할 수 있도록 한다. 이와 더불어 임피던스제어 성능을 가질 수 있도록 적분슬라이딩모드제어기를 함께 사용한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2001

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link represented to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M to model complex shaped links systematically and by eleminating elastic mode of higher order that does not largely affect option to reduce the number of elastic degree of freedom. Finally presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1245-1247
• /
• 2014

This paper presents a robust position tracking controller for motor-driven flexible joint manipulators using only the motor angle measurement. The control problem is not easy because the link position is hard to estimate in the presence of parameter uncertainties. The proposed controller consists of a feedback linearization controller (FLC) and two proportional-integral observers (PIOs) that estimate both system states including the link position and an equivalent disturbance for compensating the parameter uncertainties. Comparative computer simulations are conducted to demonstrate the effectiveness of the proposed control algorithm.

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.79-86
• /
• 2001

A method is presented for generating the path which significantly reduces residual vibration of the redundant, flexible robot manipulator in the presence of obstacles. The desired path is optimally designed so that the system completes the required move with minimum residual vibration, avoiding obstacles. The dynamic model and optimal path are effectively formulated and computed by using special moving coordinate, called VLCS, to represent the link flexibility. The path to be designed is developed by a combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems. The concept of correlation coefficients is used to select the minimum number of design variables. A planar three-link manipualtor is used to evaluate this method. Results show that residual vibration can be drastically reduced by selecting an appropriate path, in the presence of obstacles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.896-901
• /
• 1990

A simulation analysis is presented for the position control of a single-link flexible manipulator whose end-effector is subjected to an impulsive force. Arm is rotated by a d.c. servomotor at the shoulder so that the end point stays precisely at its initial position even if the end effector is thumped with the impulsive loading. A gap sensor is used to measure the tip displacement. The control torque based on the PD control law is applied to the motor through the driver circuit. The control strategy is tested by means of computer simulation for the one-link flexible-arm prototype in the authers' laboratory at Tohoku Univ.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.95.3-95
• /
• 2001

This paper investigates the simultaneous use of mixed H2/H_inf and mu-synthesis design methodology to design a robust controller for flexible link. We adopt four steps to design control system as follows: Step 1 : Generally, there are differences between the nominal and real model, so we consider the plant as a combination of parametric model uncertainty and unstructured uncertainty represents real structural uncertainties associated with the damping ratios of the flexible modes retained in the nominal model without payload. denotes the uncertainty which is due to the payload added at the tip. Step 2 : We adopt the mixed H2/H_inf theory to design a feedback controller K(s) by using the model uncertainty ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1165-1166
• /
• 2013