Proceedings of the Korean Vacuum Society Conference
/
한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
/
pp.285-286
/
2012
육각형 구조를 지닌 2차원의 물질인 그래핀은 우수한 전도도와 투과율로 투명전극의 신소재로 각광 받고 있다. 특히, 그래핀은 현재 투명전극으로 가장 많이 사용되고 있는 Indium Tin Oxide(ITO)로는 구현하기 힘든 Flexible display의 어플리케이션으로 사용하기 위한 목적으로 많은 기술 개발이 이루어지고 있다. 이러한 그래핀의 응용은 가장 먼저 그래핀의 생산이 안정적이고 원활히 이루어질 때 실질적으로 가능할 것이다. 하지만, 탄소로 이루어진 그래핀의 성장은 제한된 기판 위에서만 가능하기 때문에 성장이 이루어진 그래핀을 다른 기판에 전사시켜야하는 문제점이 있다. 그래핀 전사방법에는 직접전사, PMMA 전사, TRT 전사, 금속전사, 망전사, PDMS 전사 등 다양한 방법이 있다. 이 중에서 현재 가장 많이 사용되고 있는 전사방법으로는 직접전사, PMMA 전사, TRT 전사 방법이 있다. 직접전사의 경우 니켈위에 성장된 다층의 그래핀을 전사시킬 때 많이 사용되는 방법으로 니켈 에천트에 전사 시킬 그래핀을 띄워 니켈을 녹인 후 원하는 기판을 이용하여 전사하는 간단한 방법이다. 직접전사는 전사가 이루어진 후 그래핀에 남는 결함이 거의 존재 하지 않는 장점이 있지만 문제점은 단일층의 그래핀의 경우 니켈 에천트위에서 잘 보이지 않을 뿐 아니라 에천트에서 기판으로 전사할 때 너무 얇은 막으로 인해 다 찢어져버린다는 것이다. 이를 해결하기 위해 사용되는 전사 방법으로 TRT를 이용하여 구리위에 성장된 그래핀을 상온 시에는 점성을 가진 테이프를 이용해 부치고 구리에 천트에 구리를 녹인 후 원하는 기판위에 놓고 열을 가해 그래핀을 전사하는 방법이 있다. TRT 전사방법은 얇은 막의 그래핀을 찢어지지 않도록 지지해주어 대면적 기판위에도 전사 할 수 있는 장점이 있지만 전사 후 그래핀에 남아 있는 잔여물들이 많고(그림 1. (b)), 테이프를 이용한다는 점에서 그래핀의 얇은 막이 손상될 수 있는 단점이 있다. 그렇기 때문에 본 연구에서는 직접전사와 TRT전사의 문제점들인 전사 후 잔여물와 그래핀 단일층의 손상을 최소화할 수 있는 방법으로 PMMA전사를 가장 적합한 전사방법이라는 것을 라만 분석, 면 저항측정, 그래핀을 이용한 LED제작을 통해서 살펴 보았다. 먼저 라만 분석을 이용해 TRT전사 후 상당히 많은 빈 공간이 생김을 확인할 수 있었으며, 결과적으로 면 저항이 약 $1.5k{\Omega}$~$3M{\Omega}$까지 PMMA의 약 0.9~1.2 $k{\Omega}$와 비교했을 때 큰 차이가 있음을 확인할 수 있었다. 또한, 이후 각각의 전사방법으로 얻은 그래핀을 LED의 스프레딩 층으로 제작한 결과에서도 TRT전사방법보다 PMMA전사방법의 결과가 좋음을 알 수 있었다(그림 2).
The Journal of the Korea institute of electronic communication sciences
/
제14권5호
/
pp.887-892
/
2019
In this study, after 20nm-thick $SiO_2$ thin film was deposited by PECVD method on the PES substrate, which is known to have the highest heat resistance among plastic substrates, as a buffer layer, ITZO thin films were deposited by RF magnetron sputtering method to investigate the electrical and optical properties according to the working pressure. The ITZO thin film deposited at the working pressure of 3mTorr showed the best electrical properties with a resistivity of $8.02{\times}10^{-4}{\Omega}-cm$ and a sheet resistance of $50.13{\Omega}/sq.$. The average transmittance in the visible region (400-800nm) of all ITZO films was over 80% regardless of working pressure. The Figure of merit showed the largest value of $23.90{\times}10^{-4}{\Omega}^{-1}$ in the ITZO thin film deposited at 3mTorr. This study found that ITZO thin films are very promising materials to replace ITO thin films in next-generation flexible display devices.
Journal of the Korean Graphic Arts Communication Society
/
제30권3호
/
pp.45-56
/
2012
Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.
Journal of the Korean Institute of Electrical and Electronic Material Engineers
/
제28권6호
/
pp.351-359
/
2015
Next-generation displays should be transparent and flexible as well as having high resolution and frame number. The main factor for active matrix organic light emitting diode and next-generation displays is the development of TFTs (thin-film transistors) with high mobility and large area uniformity. The TFTs used for transparent displays are mainly oxide TFT that has oxide semiconductor as channel layer. Zinc-oxide based substances such as indium-gallium-zinc-oxide has attracted attention in the display industry. In this paper, the mobility improvement of low cost oxide TFT is studied for fast operating next-generation displays by overcoming disadvantages of amorphous silicon TFT that has low mobility and poly silicon TFT that requires expensive equipment for complex process and doping process.
This Paper proposes an effective SoC hardware architecture implementing a VDP for Full HD TVs. The proposed architecture makes real time video processing possible with supporting efficient bus architecture and flexible interface. Video IP cores in the VDP are designed to provide a high quality of improved image enhancement function. The Avalon interface is adopted to guarantee real-time capability to IPs as well as SoC integration. This leads to reduced design time and also enhanced designer's convenience due to the easiness in IP addition, deletion, and revision for IP verification and SoC integration. The embedded software makes it possible to implement flexible real-time system by controlling setting parameter details and data transmitting schemes in real-time. The proposed VDP SoC design is implemented on Cyclon III SoPC platform. The experimental results show that our proposed architecture of the VDP SoC successfully provides required quality of Video image by converting SD level input to Full HD level image.
The Journal of the Korea institute of electronic communication sciences
/
제15권1호
/
pp.61-70
/
2020
In this study, the IOT-based desk layout method was proposed to complement the existing seating method and to improve the work efficiency. The IoT system for the desk layout needs determining the function, type and network protocol of the sensor to find out the working status of the desk to reasonably assist the worker's seat placement. A collection method was proposed. The algorithm used in Block Stacking was used when deciding how to allocate seats using the acquired data. As a result, we could suggest an arithmetic basis for rational desk layout in IoT environment and show that it can be applied to an advanced flexible seating system based on working type in addition to the preferences of employees in the future.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
한국정보통신학회 2013년도 춘계학술대회
/
pp.96-98
/
2013
Through reviewing the characteristics of digital TVs, which have emerged in CES since 2005, in the view of technology growth and substitution curves, this paper is to provide a prediction on the next generation's multi-media on smart environment. As a result, digital TV has been developed on the flow of its technology growth curve from the early version in 2005 to smart digital TV in 2013, which emphasizes the key word "connected", and it has already come to the market puberty. Also, as it has the characteristics such as supporting multi functional and multi media environments and introducing curved or flexible display, the digital TV in CES 2013 has reached in introductory stage on the technology substitution curve.
Proceedings of the Korean Vacuum Society Conference
/
한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
/
pp.125-125
/
2011
In this study, we investigated the electrical, optical, structural, and surface properties of indium zinc oxide (IZO)/Ag/IZO multilayer electrode grown by specially designed roll-to-roll sputtering system using the flexible substrate. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO/Ag/IZO multilayer electrode. At optimized conditions, the bottom IZO layer (40 nm) was deposited on a flexible substrate. After deposition of the Bottom IZO layer, Ag layer was deposited onto the bottom IZO film as a function of DC power (200~500 W). Subsequently, the top IZO layer was deposited onto the Ag layer at identical deposition conditions to the bottom IZO layer (40 nm). We investigated the characteristics of IZO/Ag/IZO multilayer electrode as a function of Ag thickness. It was found that the electrical and optical properties of IZO/Ag/IZO multilayer electrode was mainly affected thickness of the Ag layer at optimized condition. In case of IZO/Ag/IZO multilayer electrode with the Ag power (350W), it exhibited a low sheet resistance of 7.1 ohm/square and a high transparency of 86.4%. Furthermore, we fabricated the touch screen panel using the IZO/Ag/IZO multilayer electrode, which demonstrate the possibility of the IZO/Ag/IZO multilayer electrode grown by roll-to-roll sputtering system as a transparent conducting layer in the touch screen panel.
Proceedings of the Korean Society of Broadcast Engineers Conference
/
한국방송공학회 2006년도 학술대회
/
pp.257-260
/
2006
In Video streaming environment, we must consider terminal and network characteristics, such as display resolution, frame rate, computational resource, network bandwidth, etc. The JVT (Joint Video Team) by ISO/IEC MPEG and ITU-TVCEG is currently standardizing Scalable Video Coding (SVC). This can represent video bitstreams in different sealable layers for flexible adaptation to terminal and network characteristics. This characteristic is very useful in video streaming applications. One fully scalable video can be extracted with specific target spatial resolution, temporal frame rate and quality level to match the requirements of terminals and networks. Besides, the extraction process is fast and consumes little computational resource, so it is possible to extract the partial video bitstream online to accommodate with changing network conditions etc. With all the advantages of SVC, we design and implement a network-adaptive SVC streaming system with an SVC extractor and a streamer to extract appropriate amounts of bitstreams to meet the required target bitrates and spatial resolutions. The proposed SVC extraction is designed to allow for flexible switching from layer to layer in SVC bitstreams online to cope with the change in network bandwidth. The extraction is made in every GOP unit. We present the implementation of our SVC streaming system with experimental results.
한국정보디스플레이학회 2008년도 International Meeting on Information Display
/
pp.4-4
/
2008
The progress in flat panel displays over the last two decades has been astonishing. In just 20 years, the LCD-TV grew up from a 2-inch curiosity, to an industry that will sell about 120 million flat panel TV's this year, with viewing area up to 4000 times larger. That success is based on continuous innovation, especially in manufacturing processes. For the next decade to bring another doubling of the business, progress will need to continue in four major areas: Human factors, ecological impact, visual quality, and of course continued drive towards affordability. This talk will detail the technology advances that can allow this industry to meet those challenges. Human factors. Today, we adapt our lifestyle to our technology. People organize their offices, and their homes, around displays. We pass around mobile phones to share images, rather than experiencing them as a group. Billions of newspapers continue to be sold daily. Advances in flexible displays can lead to large portable displays. "New era projection" includes the handheld Pico Projectors that are already on the market, and will ultimately appear integrated in mobile phones the same way cameras do today. "Eco" impact. Today TV's are one of the top energy consumers in a U.S. home, and the fastest growing. Watching a large flat panel TV can cost twice as much as running a large refrigerator. With today's concern about energy consumption, regulations are starting to emerge worldwide to limit TV electrical use. Fortunately, good solutions exist in using light management films to eliminate bulbs, saving power without increasing cost. Going forward, LED backlights will drive another step downward. OLED displays might be the ultimate solution. Visual quality. The color of an LCD-TV is still often considered inferior to a far less expensive CRT. And almost all displays suffer from representing a three-dimensional world on a two dimensional surface. The technology to improve color is available today, and will likely move from premium sets into the mainstream as costs come down. 3D is now arriving in movie theaters worldwide, and that will drive up the demand for similar realistic images in home theaters. And the technology is emerging today for 3D representation to move beyond specialized applications into everyday use, on screens large and small. Affordability. The world takes cost-down miracles for granted in consumer electronics. Each of these other advances will be balanced with a drive for affordability, especially as the market grows in emerging countries. The other three challenges must be met without increasing cost. Putting this all together, the next few years will emphasize "eco friendly" designs, and enhanced images such as 3D. By 2013 we will start to see serious penetration by emissive technologies (OLED, high efficiency plasma, or other), with the "ultimate display" likely not in the market for a decade. Lots of opportunities for innovation remain ahead of us.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.