• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.150-152
• /
• 2004

The number of layers in rigid PCB(printed circuit board) is restricted, so the number of components can be embedded in module is restricted also. But using flexible multilayer PCB, the layers over than 7 can be evaluated. In this study, to verify the possibility of application of flexible multilayer PCB to RF modules, multilayered embedded capacitor is fabricated and analyzed. The characteristics of embedded capacitor is analyzed and compared to that of MLCC and LTCC capacitor. Embedded capacitor has better electrical features than MLCC and compatible one to LTCC capacitor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.888-896
• /
• 2011

In this paper, we studied characteristics of the bent antenna febricated on Flexible-PCB. Flexible-PCB consisting of a polyimide has dielectric constant 3.5, thickness 0.125 mm. Proposed antennas which operates at Bluetooth band are a rectangular loop antenna and a loop antenna with inverted-L type stub. We compared the input matching and radiation characteristics of the proposed antennas under eight kinds of bending conditions.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2001-2008
• /
• 2015

This paper proposes the concept of FlexPCB(flexible Printed Circuit Board) conductive structure for electrodynamic bearings. It has three main advantages: easy “printing” of considerably thin conductive wires, resulting in potential reduction in stray eddy currents; realization of specific conductive configurations with high precision to optimize the eddy current flowing; simplicity in being wound to cylinders or hollow cylinders of different diameters. To verify this new concept, the FlexPCB conductive structure was manufactured, an axial electrodynamic bearing test rig was built and the conductive structure's induced voltage was measured along the axial displacements from 0mm to 56mm at three rotating speeds. The finite element method was used to calcuatlate the flux density of electrodynamic bearing and induced voltage of the FlexPCB conductive structure. The experimental results are compared with the results from the FEM calculation. It is concluded that the measured and calculated induced voltages have consistency in the middle part of the bearing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.729-730
• /
• 2010

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.62-65
• /
• 2018

In the era of the 4th Industrial Revolution, IoT products of various and specialized fields are being developed and produced. Especially, the generation of the artificial intelligence, robotic technology Multilayer substrates and packaging technologies in the notebook, mobile device, display and semiconductor component industries are demanding the need for flexible materials along with miniaturization and thinning. To do this, this work use FCCL (Flexible Copper Clad Laminate), which is a flexible printed circuit board (PCB), to implement FPCB (Flexible PCB), COF (Chip on Film) Use is known to be essential. In this paper, I propose a transfer device which prevents the occurrence of scratches by analyzing the mechanism of wrinkle and scratch mechanism during the transfer process of thin film material in which the thickness increases while continuously moving in air or solution.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.38-38
• /
• 2004

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.5-21
• /
• 1994

We have described the optimal process route selection model for the PCB(printed circuit board) auto-insertion line. This PCB assembly line is known as a FFL(flexible flow line) which produces a range of products keeping the flow shop properties. Under FFL environments, we have emphasized the balancing of work-loads in order to maximize total productivity of PCB auto-insertion line. So we have developed a heuristic algorithm based on a work-order selection rule and min-max concept for the job route selection model.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3022-3024
• /
• 2005

연성 PCB(flexible printed circuit board)는 현재 노트북 PC와 디지털 카메라등에 적용되며, 굴곡성이 강하고 소형화 및 조립에 용이하여 주로 기판 사이나주기판과 외부 커넥터사이에 데이터의 전송매체로써 널리 사용되는 핵심부품이다. 근래에 개발되는 PCB 기반의 고성능 신호처리회로들은 데이터 전송율이 수백 MHz에서 수 GHz에 이르고 있으며, 신호선과 유전체, 접지판의 구조적 특성에 따라서, 반사 효과와 같은 신호무결성 문제들이 파생되어 신호의 최대성능을 제한하게된다. 이에 따라 적절한 임피던스 제어를 통하여 고성능신호들의 왜곡을 상쇄시키는 기술이 중요하게 되었다. 본 논문에서는 연성 PCB 전송라인을 위한 임피던스 모델을 대상으로 각 모델의 주요 특징 및 정확성을 분석하였다. 연성 PCB의 전송라인은 보통 전통적인 마이크로스트립 라인의 특성 임피던스 모델에 비해 신호선의 너비가 크며, 이를 반영한 개선된 수학적 임피던스 모델들이 제안되어 있다. 따라서 본 논문은 기존의 마이크로스트립 전송라인과 연성 PCB 전송라인에 적합한 수학적 모델들을 이용하여 신호 무결성 문제를 모의할 수 있는 CAE(computer-aided engineering) 도구의 임피던스 측정 결과를 비교 및 분석하였다.

• Polymer Science and Technology
• /
• v.21 no.1
• /
• pp.3-9
• /
• 2010

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2001.05a
• /
• pp.78-80
• /
• 2001