• Korean Journal of Optics and Photonics
• /
• v.34 no.5
• /
• pp.185-191
• /
• 2023

We report the results of evaluating the hardness, flexibility, and adhesion between the protective layer and the stealth sheet after applying a protective layer to improve the practicality of the flexible stealth sheet. The result of the ISO 15184 pencil hardness test showed that the hardness increased from HB to 3H by three grades when a protective layer was applied. The flexibility evaluation was conducted by bending the material against cylinders of certain diameters and observing whether cracks occurred according to the ASTM D522 test method. The result showed that the minimum diameter was 0.125 inches. The adhesion was evaluated by using the ASTM D3359 test method, attaching and peeling off an adhesive strip to the protective layer and determining the proportion of the protective layer peeling off. The result was 5B, which is better than the military adhesion limit of 4B.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.563-566
• /
• 2009

This paper presents an LMI-based method to design a integral sliding mode controller for a class of uncertain systems. Using LMIs we derive an existence condition of a sliding surface. And we give a switching feedback control law. Our method is a generalization of the previous integral sliding mode control design methods. Since our method is based on LMIs, it gives design flexibility for combining various useful design criteria that can be captured in the LMI-based formulation.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.1-10
• /
• 2004

The purpose of this study was to compare the efficiency of four different cleaning method of silk and to fabrics, which were excavated from the sixteenth century tombs. The four cleaning methods were hand washing in water and hand washing in solvent, washing in ultrasonic cleaner, and using of ultrasonic gun after washing in ultrasonic cleaner. The following is the result of the experiment: ㆍBoth silk and jute fabrics shrank the most after hand-wash in water. This cleaning method decreased their thickness the most but changed their strength the least. However, the color of the fabric changed the most after had-wash in water. This washing method might discolor the dyed fabric, so one must check the condition of the fabric thoroughly before washing it. ㆍThe weight and the thickness of the fabric changed little after ultrasonic cleaning. This cleaning method, therefore. is less efficient than hand-water-wash. The use of ultrasonic gun after ultrasonic wash for partial cleansing enhanced the efficiency a little. Nevertheless, this method left stain around the area where the gun was used, and the injected water could damage the fabric. ㆍThe excavated fabric became softer in the cleaning process as the dirt was washed away. In both cases of silk and jute fabrics cleaning, solvent made the fabric softer than water. Washed in solvent, the fabric did not swell. But water penetrated to the fiber during the cleaning process and made the fabric swell. When the water evaporates, the swollen fiber structure collapses and the fabric become stiff. Ultrasonic wash did not cause much change in the flexibility of the fabric, for this method does not remove the dirt as effectively as the other method.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.711-714
• /
• 1998

본 논문에서는 wide data-width DRAM을 위한 flexible column redundancy scheme을 제안하였다. 구현된 redundancy scheme은 DB line shift method를 사용하여 wide data-width를 갖는 고집적 DRAM에 적용할 때 기존 redundancy scheme보다 더 작은 redundancy cell 면적과 fuse개수를 가지면서 더 큰 flexibility를 가지게 되었다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.35
• /
• pp.157-164
• /
• 1995

FMS(Flexible Manufacturing System) is an automatic manufacturing system coincided with pursue of flexibility, productivity, and reliability. It is effective means to prove tje needs of market changes in view of production, This study is carried out to provide a economical evaluation methods of introduction for FMS in domestic corporations using PB, ARR, NPV and IRR.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.305-312
• /
• 1997

Shear connections in steel structures should satisfy dual criteria of shear strength and rotational flexibility and ductility. The connection should be strong enough to transfer the shear reaction of the beam, and should have sufficient rotational flexibility and ductility to rotate easily and supply the end rotation demand of the beam. This paper is concerned with the behavior of double-angle shear connections where the parameters are numbers of high strength bolts, bolt pitch, the length of angle leg, and connection method. An experimental investigation of shear connection was conducted by testing 12 beam-to-column joint specimens. Based on experimental and analytical study, the failure modes are developed and proposed design formulas.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.28-35
• /
• 1998

Computer simulation technique has been applied on the various engineering fields to reduce cost and development period. On this paper, we introduce a crane analysis program. Using this program, we can predict reaction force of each part or supporting force of truck crane on a personal computer system with out exclusive knowledge of multi-body dynamics. In order to consider the effect of boom flexibility according to each working condition, flexible dynamic theory is applied to the program. Actual crane model is analyzed on special work condition using this program and the results are compared with those of rigid boom model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.471-475
• /
• 2007

Design equations of coupling plates, which connects floor beam of the upper modular unit and overhead beam of the lower one in order to improve serviceability in vibration, are proposed. End conditions of the coupled beams is semi-rigid and the optimal location of the coupling plates are assumed. Rotational constraints for both ends of the coupling plate modeled with beam elements are released and flexibility method is applied to obtain deflection equations of the coupled beam. Proposed equations are defined using the flexibility of the coupling plate, of which size can be determined inversely. Based on numerical analysis, coefficients of the design equations are calibrated and the revised equations are verified to be useful in the design of the coupled beam.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2001

A method for actively controlling dynamic reaction forces in flexible structures subject to persistent excitations is presented. Since reaction forces are not directly measured in flexible structures, reaction forces are estimated by using the Kalman filter. The estimated reaction force is used as an error signal in the adaptive feedforward disturbance cancellation controller. In order to compensate the static effect of the truncated modes in the reaction forces, the residual flexibility matrix is used with the Kalman filter. The paper presents the formulation of the reaction forces in conjunction with the Kalman filter estimator and the adaptive feedforward controller. The results show that the dynamic reaction forces at its supports in a flexible beam test rir are well suppressed.

• Korean Institute of Interior Design Journal
• /
• v.14 no.1
• /
• pp.64-72
• /
• 2005

The purpose of this study was to analyze the flexible system in a typological way that develops and promotes the various methods of flexible system. The main method of this study was literature review and content analysis on various flexible systems and a case study of flexible housing. The flexible system in this typological analysis was classified into two categories: 'Elements of Flexibility' and 'Variation'. The category of Flexibility Elements was categorized into 'Primary Elements'(e.g., walls, floors, and ceilings),'Secondary Elements'(e.g., doors, windows, and furniture), and 'Tertiary Elements'(e.g., lighting, hues and finishing materials). Variation Effect was classified into 'Visual Variation', 'AppBicative Variation', and 'Layout Variation'. Also, Variation could be classified into 'Finish-centered', 'Application-centered', and 'Layout-centered' The flexible system developed in this study is a basis for further concrete flexible methods.