• 대한본초학회지
• /
• 제22권2호
• /
• pp.103-108
• /
• 2007

Objectives : A morphological classification among Pinelliae Tuber, Typhonii Flagelliformis Rhizoma and Arisaematis Rhizoma was made through microscopic observation. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Result : 1. Pinelliae Tuber is like a ball with a $1{\sim}1.5cm$ diameter, with a concave apex and pockmarked root trace around. 2. Typhonii Flagelliformis Rhizoma is somewhat oval or like a cone, with a $4{\sim}8mm$ diameter, a $7{\sim}15mm$ height, a projected round apex, and a pin-pointed back. 3. Arisaematis Rhizoma is somewhat flat round with a $2{\sim}2.5cm$ diameter, a little than Pinelliae Tuber, and its apex has incomplete lobopodium and root trace. 4. Fundamental tissues of Pinelliae Tuber, Typhonii Flagelliformis Rhizoma, and Arisaematis Rhizoma have starch grains and mucilage cells, and their mucilage cells include the raphides of calcium oxalate. Conclusion : Internal forms of Pinelliae Tuber, Typhonii Flagelliformis Rhizoma, and Arisaematis Rhizoma are difficult to distinguish from one another, but Pinelliae Tuber and Arisaematis Rhizoma can be distinguished by their external forms and sizes, and Pinelliae Tuber and Typhonii Flagelliformis Rhizoma were distinguished by the forms of apex.

• Journal of Species Research
• /
• 제5권1호
• /
• pp.188-200
• /
• 2016

During recent screening to discover indigenous prokaryotic species in South Korea, a total of 31 bacterial strains assigned to the class Gammaproteobacteria were isolated from a variety of environmental samples including soil, tidal flat, freshwater, seawater, and plant roots. From the high 16S rRNA gene sequence similarity (>98.7%) and formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged to each independent and predefined bacterial species. There is no official report that these 31 species have been described in South Korea; therefore 5 species of 3 genera in the order Alteromonadales, 11 species of 3 genera in the order Pseudomonadales, 8 species of 6 genera in the order Enterobacteriales, 2 species of 1 genera in the order Vibrionales, 1 species of 1 genera in the order Oceanospirillales, 3 species of 3 genera in the order Xanthomonadales, and 1 species in the order Spongiibacter_o within the Gammaproteobacteia are reported for proteobacterial species found in South Korea. Gram reaction, colony and cell morphology, basic biochemical characteristics, isolation source, and strain IDs are also described in the species description section.

• Journal of Species Research
• /
• 제5권1호
• /
• pp.166-178
• /
• 2016

An outcome of the study to discover indigenous prokaryotic species in Korea, a total of 26 bacterial species assigned to the classes Bacteroidetes and Firmicutes were isolated from diverse environmental samples collected from soil, tidal flat, freshwater, seawater, wetland, plant roots, and fermented foods. From the high 16S rRNA gene sequence similarity (>99.0%) and formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged to each independent and predefined bacterial species. There is no official report that these 26 species have been described in Korea; therefore 14 strains for the order Flavobacteriales and two strains for the order Cytophagales were assigned to the class Bacteroidetes, and 8 strains for the order Bacillales and 4 strains for the order Lactobacillales were assigned to the class Firmicutes are reported for new bacterial species found in Korea. Gram reaction, colony and cell morphology, basic biochemical characteristics, isolation source, and strain IDs are also described in the species description section.

• 한국실내디자인학회논문집
• /
• 제19권4호
• /
• pp.11-21
• /
• 2010

The purpose of this study is to examine the design characteristic of the facade of the main adminstration building in university. The main administration building which is a basic of educational facilities has various administration setups, such as the register's office, the student affairs section, the planing department, the general affair's office and so on. This building performs academic, administration, facilities management, and admissions service. Also, the building has an ideological, historical, and symbolic image, having an organic relationships with the other educational facilities. This study choose one hundred seven universities, except universities that does not provide information easily and the second campus which does not have the main administration building, as the subjects of the study. The analysis is derived from the design elements applied to facade design of the main administration building and this is divided into design principles(balance symmetry, contrast, rhythm), the formal composition(geometrical, linear), and the style of architecture(classical architecture and modern architecture). The results of the research are summarized as follows: The design characteristic of the facade of the main adminstration building in university has chronologically changed. First of all, in the 1940's, symmetry emphasized on the center of building, superimposition, division, pediment, and arch were marked. Then, superimposition was prominent in the 1950's and symmetry emphasized on the center of building was shown in the 1960s again. Flat roof was in the 1970's, 1990s and 2000's. Finally, pediment was dominant in the 1980's. The design elements of the main administration building can be samples of chronological styles of architecture. Facade design, with proper design of the past and recent times, includes the meaning that achieve the great purpose of the university by emphasizing visual images.

• Journal of Species Research
• /
• 제6권1호
• /
• pp.1-14
• /
• 2017

As a subset study to discover indigenous prokaryotic species in Korea in 2014, a total of 34 bacterial strains assigned to the phylum Actinobacteria were isolated from various environmental samples collected from activate sludge, biotite, freshwater, gut of marine organisms, mud flat, sediment, soil, spent mushroom compost and sea water. On the basis of high 16S rRNA gene sequence similarity and a tight phylogenetic association with the closest species, it was revealed that each strain was assigned to independent and previously described bacterial species, with the exception of one isolate. There is no official report that these 34 species included in the phylum Actinobacteria have been described in Korea: 6 species of 5 genera in the order Corynebacteriales, 1 species of 1 genus in the order Frankiales, 2 species of 2 genera in the Micromonosporales, 14 species of 10 genera in Micrococcales, 2 species of 2 genera in the Propionibacteriales, 1 species of 1 genus in the Pseudonocardiales, 4 species of 2 genera in the Streptomycetales, 2 species of 2 genera in the Streptosporangiales and 1 species of 1 genus in the Solirubrobacterales. Gram reaction, cell and colony morphology, pigmentation, physiological characteristics, isolation sources and strain IDs are described in the section of species description.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.298-306
• /
• 2008

STATEMENT OF PROBLEM: Effect of surface treatment of ceramic under loading does not appear to have been investigated. PURPOSE: The aim of this study was to investigate the effect of surface treatment of esthetic ceramic, which is performed to increase the bonding strength, on the fracture stress under controlled cyclic loading condition. MATERIAL AND METHODS: Sixty 1.0 mm-thick specimens were made from Mark II Vitablocs (Vita Zahnfabrik, Germany) and divided into 3 groups: polished (control), sandblasted, and etched. Specimens of each group were bonded to a dentin analog material base including micro-channels to facilitate the flow of water to the bonding interface. Bonded ceramics were cyclically loaded with a flat-end piston in the water (500,000 cycles, 15Hz). Following completion of cyclic loading, specimens were examined for subsurface crack formation and subsequent stress was determined and loaded to next specimen by the staircase method according to the crack existence. RESULTS: There were significant differences of mean fatigue limit in the sandblasted (222.86 ${\pm}$ 23.42 N) and etched group (222.86 ${\pm}$ 14.16 N) when compared to polished group (251.43 ${\pm}$ 10.6 N) (P<.05; Wald-type pair-wise comparison and post hoc Bonferroni test). Of cracked specimens, surface treated group showed longer crack propagation after 24 hours. All failures originated from the radial cracking without cone crack. Fracture resistance of this study was very low and comparable to failure load in the oral cavity. CONCLUSION: Well controlled cyclic loading could induce clinically relevant cracks and fracture resistance of Mark II ceramic was relatively low applicable only to anterior restorations. Surface treatment of inner surface of feldspathic porcelain in the matsicatory area could influence lifetime of restorations.

• 신재생에너지
• /
• 제4권4호
• /
• pp.30-36
• /
• 2008

The possibility of whether the induced wind from a vehicle traveling on highway can be used in wind power generation has been verified through computational flow analysis. The bus which is presumed to accompany relatively strong and wide range of induced wind compared to passenger vehicles because of its wide frontal area has been set as the subject of research. In order to ensure the reliability of research, the flow analysis surrounding the bus on a flat road where median strip is not installed has been compared with a preceding research while the validity of grid system and interpretation method used in this research have been assured by a qualitative method. In case of the median strip type wind power generator system, because it has been verified that a strong streamwise wind speed (5 m/s) is derived from the contraction effect of flow passage between the bus and the median strip while maintaining a relatively consistent upwind wind speed (1.4 m/s) in vertical direction in the wake area after the bus passes by although the change of wind speed is intense, it was decided as having some possibility of wind power generation. In case of the traffic sign panel type wind power generator system installed at the upper top of highway, because the wind speed of 2 m/s level has been derived for a limited time only at a section equal to the length of the bus and a faint induced wind speed less than 0.5 m/s was shown at other regions, it was decided as having almost no possibility of wind power generation.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.356-363
• /
• 2015

Microbubbles moving in the turbulent boundary layer are visualized and investigated in the point of frictional drag reduction. The turbulent boundary layer is formed beneath the surface of the 2-D flat plate located in the tunnel test section. The microbubble generator produces mean bubble diameter of 30 – 50 μm. To capture the micro-bubbles passing through the tiny measurement area of 5.6 mm² to 200 mm², the shadowgraphy system is employed appropriately to illuminate bubbles. The velocity field of bubbles reveals that Reynolds stress is reduced in the boundary layer by microbubbles’ activity. To understand the contribution of microbubbles to the drag reduction rate more, much smaller field-of-view is required to visualize the bubble behaviors and to find the 2-D void fraction in the inner boundary layer.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.88-98
• /
• 1997

Welding defects, such as porosity and spike, have sometimes occurred in deep penetration electron beam welds. These defects are known to be one of the serious problem in electron beam welds. So, effects of active parameters ($a_b$) on bead shape and occurrence of defects in electron beam welds of heavy section 9%Ni steel plates were investigated. Partial penetration welding in flat position, and deep penetration welding of 10 ~ 28mm depth were investigated in this study. It is desirable to select low accelerating voltage and above the surface focus position $a_b$$\geq$1.2 at which a wine-cup shaped bead is obtained to avoid the welding defects such as spike and root porosity. When the accelerating voltage of electron beam was low (90kV), active parameter ($a_b$) did not influence on the bead width, penetration depth and weld defects significantly. However, in case of high voltage ($\geq$120kV), active parameter ($a_b$) was sensitively associated with penetraton depth and weld defects, i.e. when the active parameter (($a_b$) was in the range of 0.6 to 1.0, the depth of penetration was always over the target (23mm), while the depth of penetration was dramatically decreased with further increase of active parameter ($a_b$). The weld defects were decreased with the increase of active parameter $a_b$ resulting in the decrease of energy density of the focused beam in the root part of fusion zone.

• Journal of Species Research
• /
• 제4권2호
• /
• pp.109-126
• /
• 2015

As a subset study to discover indigenous prokaryotic species in Korea, a total of 39 bacterial strains assigned to the classes Betaproteobacteria and Gammaproteobacteria were isolated from diverse environmental samples collected from soil, tidal flat, freshwater, seawater, seaweed, wetland, plant roots, guts of insects, and fermented foods. From the high 16S rRNA gene sequence similarity (>99.1%) and formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged to each independent and predefined bacterial species. There is no official report that these 39 species have been described in Korea; therefore 4 species of 4 genera in the order Burkholderiales and 1 species in the order Neisseriales within the class Betaproteobacteria, and 10 species of 6 genera in the order Alteromonadales, 11 species of 3 genera in the order Pseudomonadales, 4 species of 4 genera in the order Enterobacteriales, 2 species of 2 genera in the order Vibrionales, 1 species in the order Aeromonadales, 3 species of 3 genera in the order Oceanospirillales, 2 species of 2 genera in the order Xanthomonadales, and 1 species in the order Chromatiales within the Gammaproteobacteia are reported for proteobacterial species found in Korea. Gram reaction, colony and cell morphology, basic biochemical characteristics, isolation source, and strain IDs are also described in the species description section.