• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1506-1511
• /
• 2003

The present study proposes a new structure for a flat plate heat pipe which could embody a thin thickness, any shapes and high heat density a unit area. It is on the structure for the formation of vapor passages and the support of the case of the flat plate heat pipe. A screen mesh is used as the one. To verify the validity of the one, the flat plate heat pipe of 1.08mm thickness was made with a layer of the screen mesh with 14 and 100 mesh number respectively and tested. Here the screen mesh with 14 mesh number plays a role of the vapor passage and the support of the case and the screen mesh with 100 mesh number functions as the wick structure. T he results show that the screen mesh excellently carries out the function of the vapor passage and the support of the case.

• 대한수학회논문집
• /
• 제28권2호
• /
• pp.353-360
• /
• 2013

We study lightlike hypersurfaces of indefinite Kenmotsu manifolds. The purpose of this paper is to prove that there do not exist totally geodesic screen distributions on semi-symmetric lightlike hypersurfaces of indefinite Kenmotsu manifolds with flat transversal connection.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.217-223
• /
• 2016

In this research, a continuous roll-to-roll screen printing system was developed using a flat screen. It has a newly devised sliding mechanism of screen printing module, which can be controlled accurately in sync with a moving web, driven by a roll-to-roll tension control and web-guiding system. In addition, the real-time precision alignment module that consists of a vision camera and an $X-Y-{\theta}$ alignment stage was implemented. With this developed system, the feasibility of continuous printing with minimum pattern width below $60{\mu}m$ was verified, and an overlay of ${\pm}60{\mu}m$ between the laser-patterned reference mark and the printed mark on a 300-mm-wide film was achieved.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.805-813
• /
• 2005

The thermal performance of a flat-strip heat pipe with inner grooves and the screen mesh cover was investigated experimentally. The heat pipes were made of 2024 aluminum alloy of which the dimensions were 30 (W) $\times$ 4 (T) $\times$ 150 (L) mm. The cross sectional dimensions of inner groove were 0.4$\times$0.9 mm and the space between grooves was 0.6 mm. To enhance the capillary force, foe screen meshes were attached to cover the grooved inner surface. In the grooved heat pipes without screen mesh cover, the maximum thermal load of 180 W (12 W/$cm^2$) was achieved for operating temperature below $130^{\circ}C$ at horizontal position. The heat pipes with screen mesh cover showed the thermal resistances less than one third of those without screen mesh cover, and showed less fluctuation in the thermal resistance values. Furthermore, the thermal performance of the former exhibited less dependence on the tilt angle and the fill charge ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1105-1110
• /
• 2008

In this study, plasma flat fluorescent lamps (FFLs) having two electrode type structures of surface discharge was fabricated by screen printing and were characterized using spectra-radiometer and square pulse power supply. Two types of FFLs (cross-type and line-type electrode structure) were compared with variation of discharge shape and electrode distance.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.95-97
• /
• 2008

In this study eco-friendly wax remover for printing table of flat screen was investigated. Seven organic solvents, diethylene glycol monomethyl ester, triethylene glycol monomethyl ester, triethylene glycol monobutyl ester, tripropylene glycol monomethyl ester, dimethyl sulfoxide(DMSO), trichloro ethylene(TCE), tolune, were used as resin wax remover. The resin wax solubility with solvents was investigated. DMSO was found to be the most suitable eco-friendly resin wax remover.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.864-867
• /
• 2002

LG Electronics developed a perfect flat color display tube which was named "FLATRON" . This tube provides ergonomic performances with perfectly flat face and innovative manufacturing process. Foil transfer is a new technology for manufacturing screen layer for Flatron. Its main features include several properties of film, releasing agent, adhesive, aluminum layer, holes after bake-out and foil transfer process. It will be used innovative and cost oriented process for FLATRON for in CRT mass production..

• 한국컴퓨터그래픽스학회논문지
• /
• 제25권3호
• /
• pp.31-41
• /
• 2019

포그 스크린은 미세한 물방울들로 구성된 스크린으로 관찰자는 포그 스크린을 투과한 영상을 관찰하게 된다. 일반 스크린과는 달리 관찰자는 무대 위에서 연기자가 포그 스크린에 표시된 이미지를 뚫고 들어가는 모습을 볼 수 있다. 본 논문에서는 상부에서 생성된 포그 입자 집단이 중력에 의하여 아래로 떨어질 때 평평한 수직 스크린을 이루도록 하는 하향식 포그 스크린 생성 장치 구현 방법을 기술한다. 본 기법은 수조안에 배치된 초음파 진동자에 의해 수조 표면에서 포그 입자가 발생되는 원리를 이용한다. 생성된 포그 집단이 하나의 평면을 유지할 수 있도록 포그가 나오는 통로 출구 양옆에 가이드 바람을 형성하는 기법과 포그 스크린 생성 장치의 설계와 제작 방법을 기술한다.

• 공업화학
• /
• 제2권3호
• /
• pp.209-215
• /
• 1991

n-헥산과 40 wt % p-TSA 수용액으로 이루어진 비혼화성 액상계에서 교반에 의한 유기상의 분산을 해석하였다. 사용된 교반기는 blade의 형태가 flat와 금망으로 된 4가지 형태의 6-bladed turbine 교반기를 사용하였다. 실험결과, 동일한 교반속도에서 유기상의 분산정도는 blade의 형태가 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 감소하였고 계면활성제인 TBA의 농도가 증가할수록, 그리고 유기상의 부피비가 작을수록 유기상은 잘 분산되었다. 또한 완전분산에 필요한 최소교반속도는 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 증가하였으나 최소소요동력은 거의 동일하였다. 이때 Power number와 Reynolds number와의 관계는 $N_p=a\;N_{Re}{^b}$ 이었으며 교반기의 형태에 따른 상수 a와 혼합계의 종류에 따른 상수 b의 값은 각각 2200~4100, -0.69~-0.63 범위이었다.