• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.188-195
• /
• 2010

This study has been focused on the evaluation of domestic softwood timbers to replace imported timbers for woodcrafts and furniture-making. Figures on radial and tangential sections were observed with naked eyes. As the result of study on the figures appeared on the wood surface of 6 species of trees, flat grain and edge grain were clearly found from Taxus cuspidata. Juniperus chinensis and Ginkgo biloba had wavy grain figure and pigment figure, and blister figure was found in Pinus densiflora, Larix kaempferi showed pitch streak and irregular figures on its tangential section due to growth abnormalities. Wavy grain figure appeared weakly on near knot of Pinus koraiensis. The characteristic figures shown from each species of trees are expected to be used for crafts, sculptures, furniture, and interior decoration. They are also considered to have great potential to substitute imported timber sufficiently, which are currently used a lot for wood crafts and furniture-making.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.211-223
• /
• 2018

In global apparel product development, flat is one of the most important key factor for technical design communication. Proportionally correct flats based on correct scaled human body figures are imperative to be successful in the fashion business. In this study the researchers were to develop body templates for flats for Korean women body types using data from 'Size Korea 2004 (5th)', which is a Korean government apparel sizing project to analyze women's body measurements (age range 7-49). We measured 13 height measurements, 6 width measurements, 8 circumference measurements, 6 length measurements, 3 angle measurements and 5 body measurements. A body figure (i.e., schema) for each group was created by Pattern Design Software (PAD) System 4.1. Muscle was added to the schema created by Adobe Illustrator to ensure a better visualization and convenience for industry uses for flats. Developed body figure template of representative type had the largest difference in height level compared to exiting figures. It had a bigger head, lower crotch level, and longer crotch depth and hip length than existing figures.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.177-184
• /
• 2001

Combustion using oxygen enriched air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and high temperature flame. But information about it is not so enough yet. Flame figure, temperature distribution and emission concentration were measured with oxygen enriched concentration and swirl number in a turbulent diffusion flame to investigate the combustion characteristics. The results showed that flame figure became different as long as oxygen enriched concentration varied and that concentration of NO increased suddenly around $O_2$ 60%.

• Journal of the Korean Society of Combustion
• /
• v.8 no.3
• /
• pp.1-7
• /
• 2003

Combustion using oxygen enriched air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and by the high temperature flame. Flame figures, OH radical intensities, temperature distributions and emission concentrations were measured according to oxygen enriched concentration and swirl number in a turbulent diffusion flat flame. It appeared that flame figure became flat and NO concentration decreased with increase of swirl number, and that the flame temperature increased high with increase of oxygen enriched concentration. In particular, it was most significant between oxygen concentration $40{\sim}60%$.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.191-194
• /
• 1999

The balanced amplifier is a practical amplifier to, implement a broadband amplifier that has flat gain and good input and output VSWR. Three-stage amplifier design procedure usually divided into three partition satisfying the following requirements : low noise figure, high gain and high power output. FHX35LG HEMT device is used in the design can be obtained low noise figure at the first-stage, MGA82563 MMIC device is used in the design can be maintained high gain at the second-stage, and AHI MMIC device is used in the design can be required high power output at the third-stage. The results of three-stage balanced amplifier show that power gain is about 40㏈, noise figure is less than 1.2㏈ at operating frequency.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.117-125
• /
• 2000

The purpose of this study is the fundamental study to develope basic slacks pattern for pregnant women by analysing characteristics of the lower half of their body. The results are as followers: 1. The pregnancy has changed almost all items including the waist height, lengths and etc. and changed proportion of body by accumulation of fat. 2. The changes of the waist circumference and flat figure from waist to hip could be found by analysing the body shell (pregnant women from five months pregnance to one month after delivery). 3. The postures of five month-pregnant women were compared with those of six, seven, eight, and nine month-pregnant women, and with those of one month after delivery. The waist height has been increased till the middle of pregnancy but lowed till the end of the pregnancy.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.3
• /
• pp.61-67
• /
• 2018

Background: The purpose of this study is to report the effect of balance training through various ankle inclination on dynamic balance in healthy adults. Methods: This study was participated in 20 healthy subjects. Twenty healthy adults were randomly divided into 10 ankle inclination group and 10 flat group, 3 kinds of exercised were performed in $30^{\circ}$ of the plantar flexion, $0^{\circ}$ of the neutral angle and $30^{\circ}$ of the dorsiflexion. Above 3 kinds of exercises were also performed in the flat group. Dynamic balance of each group was evaluated using a Figure-of-8 hop test, Up-down hop test, and Functional reach test before and after the experiment. Results: In the ankle inclination, the post-experiment showed a significant difference in Figure-of-8 hop test, Up-down hop test, and Functional reach test in comparison to pre-experiment(p<.05). Conclusion: The exercise applied in the ankle inclination is effective in improvement of the dynamic balance.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.1-17
• /
• 2016

This study examined and analyzed the women's jeogoris in the Seoul Gwangjang Market and Busan Jin Market. They study explored the items to look into the current state of the Jeogori patterns, as well as investigate the flat pattern jeogoris, including its source and aspects of change. Korean women's body figure has become more westernized, and the purpose of this study is to investigate the effects of this change on the traditional jeogoris. We hope to gather valuable data, which can be used to propose a new direction for designing hanbok in the future. The study methods are as follows: First, the types of jeogori patterns were examined. Second, the current state of jeogori patterns in the Seoul Gwangjang market and Jin market in Busan were analyzed to look into how the patterns have transitioned. And lastly, the reason for the origination of the flat pattern jeogori and the type of changes will be examined. Current study results show that two pattern types are being used: the flat composition jeogori and the flat pattern jeogori. Surveys show that more than 90 percent of the jeogoris in the Seoul Gwangjang Market are of the flat composition pattern variety, while more than 90 percent of jeogoris in the Busan Jin Market are of the flat pattern variety. In 1998, western-style dress designers in Busan introduced the flat pattern jeogoris, which were used to get rid of the wrinkles caused by the extra space, into the market after the financial crisis period in Korea, as a way to revitalize the market. This new pattern was popular among tea aficionados and traditional Korean musicians. It was exposed to the public via different mediums, such as TV programs, magazines, and brochures. Busan was the first to be exposed, and then it spread to Seoul. It also seems that the reduction of production cost caused the increase of the flat pattern jeogori.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.36-44
• /
• 2014

This study was investigated to sensible characteristic and physical characteristic to estimate value of the craft for Pinus densiflora and Pinus densiflora for. erecta Uyeki wood. The sensual characteristics of wood are evaluated by wood figure, wood grain, odor, and the physical characteristics by weathering, abrasion, surface roughness and hardness. The wood figure of these species were observed at flat grain in the radial section and edge grain in the tangential section. Also, burl's figure was observed in Burl of Pinus densiflora wood. Pinus densiflora for. erecta Uyeki wood had volatile aroma compounds such as Camphene, Thymyl ether, ${\alpha}$-Longipinene, etc. Pinus densiflora wood had volatile aroma compounds such as ${\alpha}$-Longipinene, (+)-Cedrol, etc. The moisture soption, abrasion, hardness and roughness were very different between the two species.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.72-78
• /
• 2010

This paper presents a design approach of driving system for tidal flat vehicle. Firstly, topographic and geological survey of tidal flat zone was accomplished. 'Anac' located in the west-south coast of South Korea was chosen for the survey area. From the survey, the basic design data such as distribution of gullies size and bearing pressure was obtained. To figure out the shape of driving system, numerical simulations were carried out. Through the numerical dynamic simulations using $Recurdyn^{TM}$, the performance of various concepts of driving system was analyzed. From the results, we propose the conceptual design with the functions: a) low contact pressure, b) powerful driving force transmission, c) adaptation to the ground undulation. To satisfy these functional requirements, the driving system adopts rubber tracks, sprockets, tires and suspensions. The static structural analysis of the frame structure was executed as well, from which the detailed design was drawn out. To validate the performance of the designed driving system, the test vehicle which has gasoline engine of 27HP and mechanical transmission was constructed. The driving tests of the vehicle were performed twice at the "Anac" area, and unveiled its capability.