• Journal of Marine Life Science
• /
• v.5 no.2
• /
• pp.81-91
• /
• 2020

This study was conducted to find the faunal composition and distribution patterns of macrobenthos where the sand tidal flat around barrier island at Nakdong River estuary in May, 2016 and 2017. The number of species ranged from 31 to 39, and density was from 789 to 1,644 ind.m^-2 during the study period in the three tidal flats. The number of species and density were the highest in the tidal flat of Shinja-do and Jinwoo-do, respectively. The dominant species were Gammaridae unid. in amphipods of crustacea, Scoletoma heteropoda, Scoloplos armiger, Heteromastus filiformis, Prionospio japonica in polychaeta and Batillaria cumingii, Laternula marilina in mollusks from the three tidal flats. The proportion of carnivores such as crustacea and mollusks was higher in the upper part of the tidal flat, and polychaetes of deposit feeders, dominated in the middle and lower tidal flat. Overall, the intertidal macrobenthic communities in the study area showed a high proportion of carnivores. However, the sites where the mud content is high such as muddy sand sites, they showed a higher proportion of surface deposit feeders belonging to tube-builders which contribute to sediment stability. From this study, it seemed that the macrobenthic fauna of the sandy tidal flat at the Nakdong River estuary showed a similar fauna composition and zonal distribution patterns from those in other sandy tidal flats in Korea.

• Journal of Ecology and Environment
• /
• v.29 no.2
• /
• pp.105-111
• /
• 2006

A natural, tidal-flat clone of Zoysia sinica was studied to compare ramet growth properties in central area with in peripheral area. In new stolon and rhizome, internode length, weight, shoot height and weight, and spike production were monitored on July 25, 2004. The weight/height rate of shoot between stolon and rhizome, the shoot/stolon (or rhizome) rate in weight between central and peripheral area were not different. However, other properties differed in stolon from rhizome or between central and peripheral area significantly differed: 1. The rhizome in central area had a larger node number, shorter internode length, higher shoot height, larger shoot biomass, and higher rate of non-shoot nodes than that in peripheral area. 2. The stolon in central area had a smaller node number, shorter internode length, and smaller biomass than that in peripheral area. 3. In the same area, the rhizome had a larger node number (except for central area), shorter internode, higher shoot height, larger shoot biomass, higher rate of non-shoot node, and higher rate of node having over two shoots than the stolon. No relationship could be found between shoot size and spike production in shoot on vertical rhizome (lower node of old shoot).

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.639-643
• /
• 2007

Tidal regime change with general hydrolic condition change is examined, according to Garolim Tidal Power Plant (TPP) operation. Numerical model has been developed for the Yellow and East China Seas region, in order to consider the tidal regime change by the TPP operation. The changes of tidal elevation and tidal current inside the Garolim bay are also investigated in details, along with examining the change of the tidal flat area with operation. The field measurement for the tide and current have been carried out for the validation of the numerical model and for understanding the state of current system in the present state.

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.21-34
• /
• 1987

In the present study area, a part of intertidal flat in the Seosan Bay, west coast of Korea, characteristic three dominant tidal sedimentary facies and their related several typical sedimentary structures are described, Furthermore, a possible interpretation about the time stratigraphic developments of these intertidal deposits is suggested by introducing very late Quaternary (Holocene) sea-level rise in Korean Seas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.845-848
• /
• 2002

The study of photoconductor materials is demanded for development for flat-panel digital x-ray Imager. In this paper, We investigated the feasibility of application as x-ray image sensor using Cd(Zn)Te compound with high stopping power on high radiation. These Cd(Zn)Te samples were fabricated by vacuum thermal evaporation method to large area deposition and investigated I-V measurement as applied voltage. The experimental results show that the additional injection Zn in CdTe film reduced the leakage current, for the $Cd_{0.85}Zn_{0.15}Te$ detector, the net charge had the highest value as $144.58pC/cm^2$ at 30 V.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.148-151
• /
• 2004

In this study the micro landform of tide flat in west Seohan bay. North Korea was classified and the change of this environment was detected by using Landsat TM. FTM+, KOMPAST. For this. ISODATA method of the unsupervised methods was used to classify the micro landform while tasseled cap method was used to detect the change of environment in west Seohan bay, North Korea by passing years. This study shows the possibility that the topography analysis and change especially in unapproachable area could be detected and monitored by using satellite images.

• Transactions of Materials Processing
• /
• v.29 no.2
• /
• pp.113-117
• /
• 2020

Various parameters are involved in the frictional behavior of steel sheet during stamping. We performed various tests in order to investigate the influence of tool surface texture directionality upon the resulting friction in sheet forming processes. Four different tools were manufactured which gave us a range of roughness for both parallel and transverse texture directions. Each of the tools was examined in flat type friction tests under identical test conditions. The tool with the transverse surface texture produces significantly lower levels of friction than the tool with parallel texture direction. Considering the lubrication mechanism associated with transverse texture, one can imagine the lubricant being constantly supplied from the reservoir of the micro valley to the point of contact and hence producing the lower levels of friction seen.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.213-216
• /
• 2005

A numerical analysis was performed for interior connections of continuous flat plate to analyze the effect of design parameters such as column section shape, gravity load and slab span on the behavioral characteristics of the connections. Through the parametric study, the variations of shear stress distribution around the connection were investigated. According to the result of numerical analysis, as the length of the cross section of column in the direction of lateral load increases and gravity load increases, the effective area and the maximum shear strength providing the torsional resistance decrease considerably. And as the slab span loaded with relatively large gravity load increases, the negative moment around the connection increases and therefore the strength of connection against unbalanced moment decreases.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.3 s.20
• /
• pp.15-20
• /
• 2003

For measuring friction factor of artificially-roughened surfaces which are usually applied to damper seals, flat plate test apparatus is designed and fabricated. The measurements of leakage flow and pressure distribution through round-hole patterned specimen with different hole areas are described, and a method is discussed for determining the friction factor experimentally. Results show that the friction factor of the round-hole patterned surface is bigger than that of smooth surface, and increases as increasing the hole area. A empirical friction factor model for the round-hole patterned surface can be descrived by the Moody's friction factor formula.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.256-260
• /
• 2009

The optical performance of the reflective polarizer was investigated over three kinds of direct-lit backlights and/or different configurations of the optical sheets. The optical gain factor achieved by using the reflective polarizer increased as the diffuse nature of the optical sheet was enhanced, because of the more efficient polarization conversion. In addition, the gain factor decreased substantially in flat-lamp backlights compared to tubular-lamp backlights, which was ascribed to the high loss factor during the polarization recycling process due to the complex structure and large area of flat lamps. All these results suggested that reducing the loss factor of the backlight is very important for efficient polarization conversion and thus high optical gain of the reflective polarizer.