• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1053-1057
• /
• 1996

The purpose of this study is to bring out the optimal design factors which effect on dynamic characteristics in the design of proportional flow control valve with fast response characteristics, and to verify the validity of the design factors In this study, force feedback type flow control valve with nozzle-flapper is studied. And, the influences which fixed orifice, nozzle diameter, and maximum displacement between nozzle and flapper effect on dynamic characteristics are analyzed. We have done simulations using the optimal design factors and simulink(Matlab) as a simulation tool, and verified the validity of our simulations by means of comparison our simulation results with an experimental results of another similar valve.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.71.4-72
• /
• 2008

• 드라이브 ㆍ 컨트롤
• /
• 제11권1호
• /
• pp.35-41
• /
• 2014

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.1-10
• /
• 2006

Present study was conducted to improve the spring frame net trap for conger eel, Conger myriaster which prevents by-catch and protects immature fish. A series of comparative fishing experiment was carried out in water off the south-east coast of Korea from Nov. 2004 to Jul. 2005. And analyzed the amount of catch, by-catch rate, and CPUE, etc. of experimental traps which were the spring frame net traps, sorted four types of flappers. And the compared gear was a plastic conger eel pot. The conclusions were as follows. By-catch rates of spring frame net trap with the compressed flapper bound by nylon mono-filament was about 0-3%. CPUE of spring frame net trap with the compressed flapper was about 50-60% lower than that of traditional and plastic pot. And in case of conger eel that the total length is over 350mm, CPUE was little different on each type of flapper of every mesh size.

• 한국수산과학회지
• /
• 제55권5호
• /
• pp.751-757
• /
• 2022

To develop a trap to prevent the catch of juvenile rockfish Sebastes inermis and bycatch, we compared the fishing characteristics of four traps with different mesh sizes (35 mm and 50 mm) and flapper connecting lines (FCL) (3 lines and 4 lines).The number of rockfish caught in trap 1 (35 mm, 4 FCL) was 200, and juvenile rockfish (15 cm or less) accounted for 49.0%. The number of rockfish caught in trap 2 (35 mm, 3 FCL) was 185, and juvenile rockfish accounted for 58.9%. The number of rockfish caught in trap 3 (50 mm, 4 FCL) was 82, and juvenile rockfish accounted for 4.9%. The number of rockfish caught in trap 4 (50 mm, 3 FCL) was 68, and juvenile rockfish accounted for 22.1%. The total catch (bycatch rate) in trap 1, trap 2, trap 3 and trap 4 was 565 (64.6%), 637(71.0%), 260 (68.5%) and 276 (75.4%), respectively. The catch per unit effort (CPUE) for juvenile rockfish in trap 1, trap 2, trap 3 and trap 4 was 0.8, 0.9, 0.0, and 0.1 individuals/trap, respectively. The CPUE of bycatch in trap 1, trap 2, trap 3 and trap 4 was 2.9, 3.6, 1.4 and 1.7 individuals/trap, respectively.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.287-298
• /
• 2000

본 연구에서는 측정거리의 정밀도가 3.5cm이내인 GPS 선간거리계측 시스템을 이용하여 권현망 조업선의 주선에 기준국을 종선에 이동국을 설치하여 주$.$종선의 양선간격의 변화와 침로에 따른 예망항적을 측정하고 예망중인 어구의 각부에 자기식 수온수심계를 부착하여 각부의 망고와 예망수층의 파악을 통한 어구의 수중형상을 비교 분석하여 어법 및 어구의 조업진단을 행하였다. 1. 양선간격 5m일 시에는 어구가 큰 폭으로 가라앉아 불안정한 형상을 나타내며 깔대기와 자루그물도 동일한 예망수층을 이루고 있어 입망된 어군의 도피 위험성이 가장 크다. 2. 양선간격이 l00m일 시에는 어구 각부의 망고가 다소 높아지며 앞창과 문턱, 깔대기의 예망수층의 경사가 커서 자루그물의 형상이 불안정하여 어군입망의 저해요인이 되어 어획효율은 크게 감소할 것으로 판단되므로 양선간격이 좁아질수록 예망속도의 증대가 필요하다. 3. 양선간격이 200m일 시에는 어구의 수중형상이 다소 안정된 상태를 보여 주고 있으나 자루 그물 뒤끝이 다소 들어올려지며 이는 깔대기가 상대적으로 아래쪽으로 내려앉아 어획효율이 좋지 않을 것으로 예상되며 자루그물의 예망수층의 개선이 필요하다. 4. 양선간의 거리가 300m일 시에는 오비기에서 자루그물까지의 연결이 비교적 완만하게 형성되고 깔대기와 자루그물의 형상도 양호하여 전체적인 어구의 형상이 안정되어 있으나 정상적인 망고를 이룰 수 있도록 개선이 요구된다. 5. GPS 선간거리계측 시스템을 권현망어 업에 적용하여 조업을 행한다면 어군의 기록분포에 따라 적정한 양선간격을 도출함과 동시에 정밀한 양선간격의 조절이 가능하여 보다 높은 어획효율을 얻을 수 있다.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.142-147
• /
• 1998

Developing robot hands with multi-degree-of-freedom is one of the topics that researchers have recently begun to improve the limitation by adding flexibility and dexterity. In this study, an articulated servo-pneumatic robot hand system with direct-drive joints has been developed whose main feature is the minimization of the dimension. The servo-pneumatic system is advantageous to fabricate a dexterous robot hand system due to the high torque-to-weight and torque-to-volume ratio. This enables the design of a finger joint with an integrated rotary vane type actuator which produces high output torque without reduction gears, being very robust. In order to control the servo-pneumatic finger joints, a miniature proportional valve that can be attached to the robot hand is required. In this paper, a flapper nozzle type 4/3-way proportional directional valve has been designed and tested. The experimental results show that the developed valve can control a finger joint satisfactorily without much vibratory joint movements and acoustic noises.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.181-186
• /
• 1999

The effects of the frequency of upstream gust on the unsteady boundary characteristics on a downstream blade was simulated by using a Navier-Stokes code. The Navier-Stokes code is based on an unstructured finite volume method and uses a low Reynolds k-e turbulence model to close the momentum equations. The MIT flapping foil experiment set-up is used to simulate the interaction between the upstream wake and a blade. The frequency of the upstream wake is simulated by varying rate of pitching motion of the flapping airfoils. Three reduced frequencies. 3.62. 7.24. and 10.86. are simulated. As the frequency increases, the unsteady fluctuation on the surfaces of the downstream hydrofoil is shown to decrease while the upstream flapper wake has larger first harmonics of y-velocity component. The unsteady vortices are shown to interact with each other and. as a result. the upstream wake becomes undiscernible inside the inner layer. The turbulence kinetic energy shows a similar behavior. Limiting streamlines around the trailing edge of the flapper are shown to conform with the unsteady Kutta condition for a round trailing edge. while limiting streamlines around the trailing edge of the hydrofoil conforms with the unsteady Kutta condition for a sharp edge.

• 한국수산과학회지
• /
• 제20권2호
• /
• pp.95-105
• /
• 1987

어획성능이 우수한 튜브통발의 적정규격을 규명하기 위하여 규격이 다른 실험용 튜브통발을 여러 가지로 제작하여 수조실험과 해상실험을 실시하였다. 수조실험에서는 튜브, 깔때기 및 혀그물의 적정규격을 규명하였고, 해상실험에서는 수조실험에서 규명한 개량형 튜브통발과 재래식 플라그틱통발과의 어획성능을 비교 검토하였다. 본 연구의 결과를 요약하면 다음과 같다. 1. 붕장어는 통발침지 15분이내에 전체입망중 $90\%$이상이 입망하였다. 2. 개량형 튜브통발과 재래식 플라스틱통발의 구조적 차이점은 구멍이 없는 튜브의 양단에 입구가 있으며 깔때기의 끝에 양쪽으로 봉합선을 넣어 납작하게 한 2중혀그물을 부착하였고 통발의 중앙부에 그물로 만든 이료주머니를 고정시킨 점으로 압축된다. 3. 개양형 튜브통발의 적정규격은 (1) 튜브 : 직경 $12\~13\times$길이 80cm, 2) 깔때기 : 깊이 $5\times$안쪽링의 직경 6cm, (3) 혀그물 : 길이 10cm 이다. 4. 개량형 튜브통발의 어획성능이 재래식플라스틱 통발보다 약 2.3배 우수하였다.

• 영미문화
• /
• 제17권1호
• /
• pp.55-79
• /
• 2017

Ella Hepworth Dixon's The Story of a Modern Woman is a pioneering female writer?s important work which was not deeply studied yet very influential in new women literature and its cultural global impact. Although women had been often praised for their beauties specially by romantic poets but their self-realization and innate values were not widely recognized until new women writers advocated their desires and active roles in the society at the end of the $19^{th}$ century. The new women writers including Ella Dixon gained popularity with their professional skills as the journalists or the contributors to the journals which were suddenly popular and actively circulated among Victorian women. From the 1880s to 1920s, in contrast with the traditional images of wives as ?the angel in the house?, these women new women writers broke the yoke of subjugated womanhood and instead tried to freely express their independent spirits and demanded their roles in the society. Although they were criticized sometimes as "the daughter of a new guise" "a lady of restless sex" or "the wild women," new girls? perky images in new women fiction brought into the new cultural phenomenon which led to the ?flapper? girl in the 1920s. Ella Dixon?s protagonist Mary Erle, strikingly similar to author herself, was a representative new woman who displayed a wide range of new cultural perspectives from a feminist?s viewpoint, but her untimely desire in the capitalized society was not fully accomplished, just promising the potentiality of the female solidarity which might be achieved later by her feminist posterity.