• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.422-431
• /
• 2015

Wind tunnel testing to construct static aerodynamic database of KF-16 was conducted for preceding research of design of experiments in wind tunnel testing. The test model is KF-16 scaled 1/33 and it has horizontal tail, flaperon, and rudder. The experiments consist of one experiment for analyzing aerodynamic coefficients under whether or not horizontal tail is present and four experiments for analyzing aerodynamic coefficients of changes of deflection angle in control surface which are flap, flaperon, rudder, and horizontal tail. After conducting wind tunnel testing, the experimental results show that the control surface changes have a great effect on Aerodynamic characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.680-685
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-Generation Blade(NRSB)' with NRSH (Next-Generation Hub System) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS(General Small-scale Rotor Test System) at KARI(Korea Aerospace Research Institute) were tarried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(Moving Block Analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, Then NRSB-1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level fir each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.418-426
• /
• 2019

To derive a simplified analytic solution which can be utilized as a fundamental solution for the wave maker design, a segment of the wave board has been idealized as a submerged line segment in a two dimensional domain of a wave flume. The lower end of the line segment could be located at arbitrary depth of the wave flume and the upper end of the board could be also submerged to any depth from the free surface. The freely oscillating motion of the wave board is assumed to be defined by determining the condition of horizontal oscillation on both ends differently. The submerged wave board oscillating in horizontal direction could be specified by selecting the amplitude, frequency and the phase lag differently on lower and upper ends of the board. The simplified two dimensional wave generated by the wave board segment has been obtained by the first order perturbation method. It is found that the general solution of the freely oscillating wave board in two dimensional domain could be decomposed into the solution of flap motion with lower end hinge and swing motion with upper end hinge. The case study of the analytic solutions has been carried out to evaluate the effect on the wave height due to the difference of oscillation frequency, phase difference and variation of stroke between for the motion of both ends. It is found that the solution of the freely oscillating wave board could be utilized for the development of high performance wavemaker especially for irregular waves.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.848-856
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-generation Blade(NRSB)' with NRSH (next-generation hub system) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS (general small-scale rotor test system) at KARI (Korea Aerospace Research Institute) were carried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(moving block analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, then NRSB- 1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level for each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high Pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.527-534
• /
• 2018

The segment of the piston type wave board has been expressed as a submerged vertical line segment in the two dimensional wave flume. Either end of vertical line segment representing wave board could be located in fluid domain from free surface to the bottom of the flume. Naturally the segment could be extended from the bottom to the free surface of the flume. It is assumed that the piston motion of the wave board could be defined by the sinusoidal oscillation in horizontal direction. Simplified analytic solution of the submerged segment of wave board has been derived through the first order perturbation method in water of finite depth. The analytic solution has been utilized in expressing the wave generated by the piston type wave board installed on the upper or lower half of the flume. The wave form derived by the analytic solution have been compared with the wave profile obtained through the CFD calculation for the either of the above cases. It is appeared that the wave length and the wave height are coincided each other between analytic solution and CFD calculation. However the wave form obtained by CFD calculations are more closer to real wave form than those from analytic calculation. It is appeared that the linear solutions could be not only superposed by segment but also integrated by finite elements without limitation. Finally it is proven that the wave generated by the oscillation of flap type wave board could be derived by integrating the wave generated by the sinusoidal motion of the finite segment of the piston type wave board.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.68-75
• /
• 2017

This paper presents the experimental and theoretical results of the dynamic responses of a pendular energy extractor in a two-dimensional wave channel. By adopting a wave maker with varying wave height and period, the dynamic responses of the pendular buoy were experimentally obtained. Furthermore, with the aid of the co-simulation of moving particle analysis and rigid dynamic analysis, the dynamic responses of the pendular system were evaluated. In order to validate the feasibility of the proposed wave power generator, the force tuning of the pendular system with restoring energy was carried out. The results provide proof of concept data for the development and design of a commercial model for horizontal wave power generators in the shoreline area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.119-128
• /
• 1997

The purpose of this study is to examine the military look, which is one of the most popular fashion trends in the 1996 women's fashion. Military look is that imitates or reinterprets the Army uniform which is functionally useful. After World War 1 , military look appeared in the women's fashion which is functionable tailor suits style, ankle-length skirt, pants or boiler suits for work wear, overcoat against the cold, and there was an attempt to introduce a National Standard Dress. In the middle of World War II, there was a similiar circumstance in women's military fashion. There were functionable tailor suits, knee-length skirt, pants or siren suits for work wear. And the Utility Dress was nationally recommended. In addition, the regulations were introduced to control the materials and styles used for some clothes. In the 70s, as the resistance movement as counterculture began to wear Army look which was army-uniform or army caps with 'US ARMY' logo and badges, and became very popular among the youth. In the 90s, military look has got one of the fashionable fashion themes with revival of Neo- Hippie look. Not only street fashion but also high fashion designer selected the trend for '96A/W The characteristics of the military look are khaki colors or camouflage prints, epaulets, big outpockets with flap, golden buttons and army belt. As I examined, during the World War I and ll, women wore the military look because of shortage of goods and work or service, and it was recommended by government. Though the military look in 70s, began by the resistance movement, at least it became a popular fashion. Military look in 90s, does not have inner symbolic meaning or ideology but it only represents fashion trend and revival fashion.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.231-236
• /
• 2005

Nowadays breast reconstruction with autologous tissues after radical mastectomy is commonly performed, and a natural inframammary fold in the reconstructed breast is considered to be an essential aspect of symmetrical breast shape and location. Total of 104 patients underwent breast reconstruction with free TRAM flap and formation of inframammary fold with free TRAM breast reconstruction was done in 79 patients. No suture fixation for inframammary fold were done in 19 patients. 27 patients(24.0%) were made of inframammary fold with absorbable suture, 52 patients (50.0%) underwent inframammary fold creation with nonabsorbable suture. There were 4 cases(16.0%) of displacement of reconstructed breast and 2 cases(8.0%) of partial disruption of inframammary fold in the group of no suture. There were 2 cases(7.4%) of displacement of reconstructed breast and 3 cases(11.1%) of partial disruption of inframmamary fold in the fixed group with absorbable suture. There was only 1 case(1.9%) of partial disruption of inframammary fold fixed with nonabsorbable suture group. Therefore, we could speculate that the reinforcement of ligamentous structure for making the definite inframammary fold is necessary, and the area of the inframammary fold should not be undermined in immediate breast reconstruction as much as possible in order to preserve the zone of adherence. If the fold is disrupted during the mastectomy, it should be re-created with the non-absorbable sutures. Nonabsorbable suture fixation seemed to be more stable than absorbable suture. Preoperative marking and design are very important to make the symmetrical shape and location of inframammary fold in both of immediate and delayed reconstruction of breasts.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.130-141
• /
• 2017

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.5
• /
• pp.337-342
• /
• 2012

The osseous or osteocutaneous free fibula flap has become the gold standard for most mandibular reconstructions because of its favorable osseous characteristics. However, disadvantages, such as the time-consuming reconstructive step, difficulty in performing the osteotomies to precisely recreate the shape of the missing segment of mandible and poor bone-to-bone contact play a role in making the surgeons look for alternative flaps. With the advent of computerized design software, which accurately plans complex 3-dimensional reconstructions, has become a process that is more efficient and precise. However, the ability to transfer the computerized plan into the surgical field with stereolithographic models and guides has been a significant development in advancing reconstruction in the maxillofacial regions. The ability to "pre-plan" the case, mirror and superimpose natural structures into diseased and deformed areas, as well as the ability to reproduce these plans with good surgical precision has decreased overall operative time, and has helped facilitate functional and esthetic reconstruction. We describe a complex case treated with this technique, showing the power and elegance of computer assisted maxillofacial reconstruction from the University of Michigan, Oral and Maxillofacial Surgery.