• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.559-568
• /
• 2006

The purpose of this study is to evaluate the mechanical performance and fire resistance of wet-mixed high strength sprayed polymer-modified mortar in order to protect tunnel lining system which are in the event of fire disaster. Since the current commercial fire-resistant materials reproduce the low strength issue of mortar, this study aims to provide an enhanced fire-resistant mortar with a proper strength. Normally, a large temperature gradient phenomenon arise in the vicinity of free surfaces which are fully exposed in the event of persistent flame. Thereby, the determination of optimal cover depth of wet-mixed high strength sprayed polymer-mortar(WHSPM) is important for fire-resistance of tunnel lining system. With comparison of current commercial fire-resistance materials and WHSPM, the experimental result of WHSPM shows the better fire-resistant performance than the others. In addition, the cover limitation should be controlled by minimum 4cm depth in order to avoid fire-induced damage.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.86-95
• /
• 2016

Weight-bearing building materials are substantially weakened under high temperatures, and this is evident through the collapse of structures once engulfed by fire. Currently, there is no scientific or technological process of evaluating the real-time structural stability of a building whcih is engulfed by flame. There are many building design specifications which aim to reduce the risk of fire, but little consideration given to fire officer safety while operating in a dangerous building. This paper aims to provide direction within building policy in order to ensure the safe evacuation of fire-fighters in case of an impending building collapse. This paper suggests evaluation criteria for buildings which are damaged due to fire, autilizing current information on fire-resistant building design and a fire-resistant capacity.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.143-147
• /
• 2013

This paper describes a low frequency driven electromagnetic energy harvester (EMEH) which consists of a thin flame resistant (FR-4) planar spring, NdFeB permanent magnets, and a copper coil. The FR-4 spring was fabricated using a desk computer numerical control (CNC) 3D modeling machine. Mathematical modeling and ANSYS finite element analysis (FEA) were used totheoretically investigate the mechanical properties of the spring mass system. The proposed EMEH generates a maximum power of 65.33 ${\mu}W$ at a resonance frequency of 8 Hz with an acceleration of 0.2 g (1 g = 9.8 $m/s^2$) and a superior normalized power density (NPD) of 77 ${\mu}W/cm^3{\cdot}g^2$.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.125-126
• /
• 2008

기존의 후가공에 의한 방염, 발수, 항균 가공물은 원단의 표면에 부착된 방염제로 인하여 다른 기능성 가공의 성능이 급격히 저하되므로 항균성이나 발수성을 함께 나타내기 어려웠으나, 본 연구에서는 THPC-UREA와 암모니아 기상중합 기술을 이용하여 섬유의 내부 피브릴층에 고내구성 방염성을 부여한 후, 불소계 발수제와 침상구조의 4급 암모늄실란계 항균제를 섬유 표면에 고착시킴으로써 방염성과 발수성, 항균성을 동시에 가지면서 세탁내구성도 우수한 결과를 얻었다.

• Structural Engineering and Mechanics
• /
• v.78 no.1
• /
• pp.67-75
• /
• 2021

This work studies the behaviour of a steel portal frame selection under fire exposure, considering both span lengths and fire exposure times as variables. Such structures combine carbon steel (S275), fireproof micro-alloyed steel (FR), and coatings of intumescent paint with variable thicknesses, improving thereby the flame retardant behaviour of the steel structure. Thus, the main contribution of this study is the optimization of the portal frames by combining both steels, analysing the resulting costs influence on the final dimensions. Besides, the topological optimization of each steel component within the structure is also defined, in accordance with the following variables: weather conditions, span, paint thickness, and cost of steel. The results mainly confirmed that using both FR and S275 grades with intumescent painting is the Pareto optimum when considering performance, feasibility and costs of such portal frames widely used for industrial facilities.

• Structural Engineering and Mechanics
• /
• v.86 no.2
• /
• pp.211-220
• /
• 2023

The textile industry has benefited from nanotechnology in various fields of application as the use of nanomaterials, and nanotechnology is multiplying. Nanoparticles can increase the performance of textiles by up to 100 times when used in finishing, coating, and dyeing techniques, providing them with capabilities they did not previously possess. Nanotechnology is used in the textile chemical industry to produce sports mats with stain resistance, flame resistance, wrinkle resistance, moisture management, antimicrobial quality, and UV protection. The incorporation of nanomaterials into fabrics can have a significant effect on their properties, including shrinkage, strength, electrical conductivity, and flammability. Various inventions and innovations may result from nano-processed textiles in the future, thus leading to the advancement of science. This article presents the construction of sports engineering structures with high resistance to improve the quality of sports training. The mechanical properties of sports mats are improved with the help of nanotechnology. Strength, elasticity, and tear resistance are among these properties. This method enables the production of elastic, durable, and tear-resistant sports mats.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.106-111
• /
• 2012

In this study, EIFS (Exterior insulation finish system) of exterior cladding was applied Cone calorimeter test to confirm the effect of flame retardant. As a results, the initial ignition points in accordance with the coated form and concentration of the flame retardant was delayed. But flame resistant treatment of EIFS cladding to control the fire will not affect confirmed that. In addition, EIFS that uses high-density and low-density due to difference in the density of the impact of the fire was no difference. The exterior of the ignition experiment occurred before and after 40 seconds, heat release rate to 100 seconds appears to occur about 90 % compared with the other exterior wall materials, the initial fire spread very fast was confirmed. EIFS cladding in order to prevent the spread of fire in the application of EIFS legally use is limited by the use of the building. And flame spread can be prevented, such as a vertical outer wall compartment measures are urgently needed.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.95-102
• /
• 2010

Recently, a grow in size and features of Interior construction work over the complex and The Fire-related regulations have been strengthened for the prevention of fire damage. This study is purpose to propose interior design, construction and supervision for the efficient and reasonable way throughout the fire-related laws are investigated in interior architecture. First, the interior of the building work will be based on actual use Fire-related Laws and Regulations have be investigated. Second, based on analysis of material and facilities by Application can be used in production by the data were applied to the present. Third, the international Fire and Flame Retardant Standards for investigating and reviewing the relevant laws, differences and characteristics of each country were analyzed. Fourth, the various fire-related issues of regulation and the application of relevant provisions in the field works, the law's standards, and improvements were identified by analysis. Fire-Related Laws and Building codes that Safety Administration of the Fire Services are divided into design, it comes to approval from the municipal authorities with concerns about the fire that will fit on the Fire Department's administrative procedures and operations is necessary to integrate operations. In conclusion, Fire-related business are divided into Minister of Land, Transport and Maritime Affairs and Ministry of Public Administration and Security. So, Both institutions is need to be the cooperative work. It is necessary to the field supervision. Because, Flame-resistant performance standards in the field works applied are too complex. Last, Establishment of fire-related regulations will enact by private organizations and the experts to participate.

• Pediatric Infection and Vaccine
• /
• v.12 no.2
• /
• pp.157-165
• /
• 2005

Purpose : Children occupy a large proportion of burn victims. So we want to aid to pediatric burn care through the understanding of the bacterial distribution in burn wounds and antibiotic susceptibility against isolated microorganisms from burn wounds. Methods : We analysed the medical records of 213 pediatric burn patients(0~15 years), 406 samples that grew bacteria in burn wound sites. Results : Of the total 213 patients, male were 59.6% and female were 40.4%. Scalding burn was the most common(78.4%), flame burn was the second(16.4%). Pathogens were isolated in 406 samples. The most common was Pseudomonas aeruginosa(58.1%). Next were Enterococcus species, Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus species, Acinetobacter species. P. aeruginosa was resistant to trimethoprim-sulfamethoxazole in 100%, cephalothin in 98.1%, ampicillin-sulbactam in 96.2%, ampicillin in 95.3%, ceftriaxone in 95.2%, tobramycin in 93.7%, cefoperazone in 68.9%, ceftazidime in 67.7%. Enterococcus species were resistant to tetracycline in 63.9%, streptomycin in 45.5%, gentamicin in 36.1%, penicillin G in 13.7%. S. aureus was resistant to gentamicin in 89.7%, tetracycline in 86.2%, ciprofloxacin in 86.2%, penicillin G in 84.3%, oxacillin in 78.4%, erythromycin in 76.5%. Acinetobacter species were resistant to ampicillin-sulbactam in 100%, gentamicin in 85.7%, ampicillin in 83.3%, piperacillin in 61.5%. Conclusion : P. aeruginosa was highly resistant to drugs like cefoperazone in 68.9%, ceftazidime 67.7%. S. aureus was highly resistant to penicillin G in 84.3%, oxacillin in 25.9 %, but none to vancomycin in 0%, teicoplanin in 2.2%. According to the study, Acinetobacter species turned out to be multi-resistant strains, so careful attention must be paid to the choice of antibiotics.

• Composites Research
• /
• v.26 no.5
• /
• pp.309-314
• /
• 2013

Highly ablation resistant carbon nanotube (CNT)-phenolic composites were fabricated by the addition of low concentrations of CNT nanofiller. Tensile and compressive properties as well as ablative resistance were significantly improved by the addition of only 0.1 and 0.3 wt% of uniformly dispersed CNTs. An oxygen-kerosene-flame torch and a field emission scanning electron microscope (FE-SEM) were used to evaluate the ablative properties and microstructures of these CNT-phenolic composites. Thermal gravimetric analysis (TGA) revealed that the ablation rate was lower for the 0.3 wt% CNT-phenolic composites than for neat phenolic or the composite with 0.1 wt% CNT. Ablative mechanisms for all three materials were investigated using this TGA in conjunction with microstructural studies using a FE-SEM. The microstructural studies revealed that CNT acted as an ablation resistant phase at high temperatures, and that the uniformity of dispersion of the CNT played an important role in this resistance to ablation.