• ALGAE
• /
• 제19권2호
• /
• pp.145-148
• /
• 2004

As a result of the 2-year monthly monitoring of the phytoplankton community at 3 stations in Mankyeong Estuary, Korea, we learned that cyan bacterial species of the genus Anabaena occurred at most sampling points with huge salinity differences (0.1-32.5 psu). We isolated several clones of Anabaena spp. from the monitoring stations, and screen out two euryhaline and nitrogen-fixing Anabaena clones, CB-MAL21 and CB-MAL22. The two clones were grown under various environmental gradients such as temperature (20, 30, 35 and 40$^{\circ}C$), salinity (0, 2, 5, 15 and 30psu), and $PO_4^{3-}$-P concentration (0, 1.6, 8.0, 40 and 200 ${\mu}M$M). Growth of CB-MAL21 and CB-MAL22 was measured by daily monitoring of chlorophyll fluorescence from each experimental culture for more than three serial transfers. Both the two experimental clones did not grow at 0psu. Maximal growth rates of the two clones were markedly reduced at lower $PO_4^{3-}$-P concentrations showing negligible growth at 0 and 1.6 ${\mu}M$M. However, growth of CB-MAL21 was not affected by low $NO_3^--$ concentration in culture media, showing the nitrogen-fixing ability. Maximum biomass yields of the two clones decreased dramatically at 35 and 40$^{\circ}C$. Optimal growth conditions for the two experimental clones were determined to be 20-30$^{\circ}C$, 40 ${\mu}M$M $PO_4^{3-}$-P, and wide salinity range from 5.0 to over 30psu. Best growth of CB-MAL21 was shown at (20$^{\circ}C$-15psu), which is less saline and cooler condition than those (i.e., 30$^{\circ}C$-30psu) for the best growth of CB-MAL22. The euryhaline and nitrogen-fixing CB-MAL21 strain thus can be a candidate laboratory culture for the future cyan bacterial marine biotechnology in temperate coastal waters.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.93-98
• /
• 2017

트리메틸올멜라민에 의한 세리신 정착 거동을 고찰하기 위해 멜라민과 포름알데하이드를 몰 비 1:3으로 세리신정착액을 조성하여 실크 생사를 정착시켰고, 정련에 의해 세리신 정착 거동을 살펴보았다. 정착 과정에서 세리신의 정착이 일어나는 동시에 열수에 의해 세리신 I의 일부가 제거되었다. 정착 중의 감량과 정련에 의한 연감율은 멜라민과 포름알데하이드의 농도가 증가할수록 크게 감소했다. 0.011몰 멜라민과 0.033몰 포름알데하이드로 정착한 실크 생사는 불충분한 정착과 탄산나트륨에 의한 세리신의 알칼리 가수분해로 인해 많은 정련이 일어났다. 그러나 0.055몰 멜라민과 0.165몰 포름알데하이드로 정착한 실크 생사는 강한 세리신 정착으로 인해 3-8%의 매우 적은 연감율을 보였는데 이는 트리메틸올멜라민에 의해 세리신 I 분자 간에 많은 가교결합이 형성되었기 때문으로 사료된다. 또한 15% owf 유연제의 정착액으로 처리한 경우 정착에 의한 감량과 정련에 의한 연감율이 가장 작게 나타났는데 이는 유연제의 양이온이 세리신 중의 아스파르트산의 음이온과 이온결합을 형성하고 유연제의 소수부와 세리신의 소수성 영역 간에 반데르바알스력이 형성되어 세리신 I의 제거가 다소 억제된 것으로 사료된다.

• 지질공학
• /
• 제32권1호
• /
• pp.143-155
• /
• 2022

본 연구에서는 지진 모사실험을 진행하는 1 g 진동대 실험에 올라가는 연성토조(Laminar Shear Box, LSB)라고 하는 토조의 경계조건(Boundary effect)을 달리하여 다른 조건에 따른 응답가속도 증폭에 대한 분석하였다. LSB의 양 옆을 고정하여 경계조건을 달리하여 실험을 진행하였고, 가속도계를 각 동일한 위치에 설치하여 2가지 시료에 대하여 실험을 진행하였다. 또한, DEEPSOIL v7 프로그램을 이용하여 1차원 지반응답해석을 통하여 자유장 조건에서와 비교 분석하였다. 그 결과 가속도가 하층부에서 상층부로 올라갈수록 증폭하는 모습을 확인할 수 있었고, 지반응답해석과 비교한 결과, 자유장 조건에서 해석과 비슷하게 나오는 것을 확인할 수 있었다. SA분석결과, 지반응답해석과 유사한 결과를 얻을 수 있었으며, 고정한 경우는 PSA가 더욱 증폭하는 결과를 확인할 수 있었다.

• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.193-199
• /
• 2016

본 연구에서는 플라스틱 온실에서 사용하는 죔쇠의 성능 평가 시 시험편 끝단의 구속조건이 미끄럼 저항력에 미치는 영향을 분석하기 위해 시험편 구속조건을 실험변수로 판형죔쇠의 미끄럼 저항력을 측정하였다. 각 구속조건별로 측정한 미끄럼 저항력의 평균값은 서까래 고정-고정단이 가장 컸으며, 내재해형 죔쇠의 평가 기준 값과 비교한 결과에서도 서까래 고정-고정단의 경우에만 기준을 만족하는 것으로 나타났다. 그러나 서까래 고정-고정단 구속조건은 다른 구속조건들에 비해 산포도가 상대적으로 크게 나타나 신뢰성이 떨어지는 결과를 보였다. 또한, 일원분산 분석결과에서도 서까래 고정-고정단은 다른 구속조건들과 비교해 미끄럼 저항력이 유의한 차이를 보였다. 따라서 시험편 구속조건이 미끄럼 저항력 평가에 영향을 미친다고 판단하며 연구자 및 기술자들이 죔쇠의 미끄럼 저항력을 측정할 때에는 시험편의 구속조건이 결과값의 신뢰성에 미치는 영향을 면밀히 검토해야 할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.970-976
• /
• 1997

The ultra-precision machining is widely used for final machining process of precision parts, so in this study, mirror surface finishing systems using the micro abrasive film, one of ultra-precision machining method, have to examine mirror surface characteristics of the cylindrical workpiece(SM45) such as surface roughness, workpiece removal and evaluated under the condition varing film feed rate, applied pressure, grinding speed after fixing other condition. It was found that varrious machining condition have significant influences on workpiece removal, surface roughness.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.331-346
• /
• 2022

Reproducing the horizontally homogeneous atmospheric boundary layer in computational wind engineering is essential for predicting the wind loads on structures. One of the important issues is to use fully developed inflow conditions, which will lead to the consistence problem between inflow condition and internal roughness. Thus, by analyzing the previous results of computational fluid dynamic modeling turbulent horizontally homogeneous atmospheric boundary layer, we modify the past hypotheses, detailly derive a new type of inflow condition for standard k-ε turbulence model. A group of remedial approaches including formulation for wall shear stress and fixing the values of turbulent kinetic energy and turbulent dissipation rate in first wall adjacent layer cells, are also derived to realize the consistence of inflow condition and internal roughness. By combing the approaches with four different sets of inflow conditions, the well-maintained atmospheric boundary layer flow verifies the feasibility and capability of the proposed inflow conditions and remedial approaches.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.35-45
• /
• 1994

The monobath method is accomplished using chemical solution, as processing in a developing and fixing at the same time, into which the exposed photographic material is placed. For this study, we appointed some values to be a standard that to coming as a results by normal processing with the developer D-76 for film Fuji Neopan SS 35mm, and which is compared with a monobath process. The experimental results show that processed condition is useful and applicable in monobath, for FX-6a and Keelan No.315.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1096-1101
• /
• 1992

In order tominimize fixing error of workpieces, circle, prismatic, sphere, cylindrical and sculptures types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table meas the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alognment of NC program to workpiece ste-tp condition via the generation of NC progarm. A postprocessing module is alos developed for generating NC-part program(User Macro) to compensate for machining errors in end milling and boring processes. Developed method are verified by experiments.

• 한국환경보건학회지
• /
• 제23권1호
• /
• pp.34-42
• /
• 1997

A laboratory experiments were performed to investigate the treatment of photographic processing wastewater by chemical oxidation and biological treatment system. The effect of reaction conditions such as hydrogen peroxide dosage, ferrous sulfate dosage and pH on the COD removal in Fenton oxidation were investigated. The optimal dosage of hydrogen peroxide was 2.58 M and 3.87 M for the developing and fixing process wastewater, respectively. The Fenton oxidation was most efficient in the pH range of 3-5 and the optimal condition for initial reaction pH was 5 for a developing process wastewater. With iron powder catalyst, the COD for a developing process wastewater was removed in lower pH than with ferrous sulfate catalyst. The removal efficiency of COD for refractory compounds such as Diethyleneglycol, Benzylalcohol, Hydroxylamine Sulfate, Ammonium Thiosulfate, Ammonium Ferric EDTA and Disodium EDTA in the photogaphic wastewater was found than 90% except Potassium Carbonate. When the photographic processing wastewater after pretreatment by Fenton oxidation was treated with batch activated sludge process, the addition of $KH_2PO_4$ as a phosphorous compound improved the removal efficiency of COD. During the continuous biological treatment of developing and fixing process wastewater after pretreatment by Fenton oxidation, the effluent COD concentration less than 100 mg/l was obtained at 0.425 and 0.25 kgCOD/m$^3$.d, respectively.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.