• ALGAE
• /
• v.19 no.2
• /
• pp.145-148
• /
• 2004

As a result of the 2-year monthly monitoring of the phytoplankton community at 3 stations in Mankyeong Estuary, Korea, we learned that cyan bacterial species of the genus Anabaena occurred at most sampling points with huge salinity differences (0.1-32.5 psu). We isolated several clones of Anabaena spp. from the monitoring stations, and screen out two euryhaline and nitrogen-fixing Anabaena clones, CB-MAL21 and CB-MAL22. The two clones were grown under various environmental gradients such as temperature (20, 30, 35 and 40$^{\circ}C$), salinity (0, 2, 5, 15 and 30psu), and $PO_4^{3-}$-P concentration (0, 1.6, 8.0, 40 and 200 ${\mu}M$M). Growth of CB-MAL21 and CB-MAL22 was measured by daily monitoring of chlorophyll fluorescence from each experimental culture for more than three serial transfers. Both the two experimental clones did not grow at 0psu. Maximal growth rates of the two clones were markedly reduced at lower $PO_4^{3-}$-P concentrations showing negligible growth at 0 and 1.6 ${\mu}M$M. However, growth of CB-MAL21 was not affected by low $NO_3^--$ concentration in culture media, showing the nitrogen-fixing ability. Maximum biomass yields of the two clones decreased dramatically at 35 and 40$^{\circ}C$. Optimal growth conditions for the two experimental clones were determined to be 20-30$^{\circ}C$, 40 ${\mu}M$M $PO_4^{3-}$-P, and wide salinity range from 5.0 to over 30psu. Best growth of CB-MAL21 was shown at (20$^{\circ}C$-15psu), which is less saline and cooler condition than those (i.e., 30$^{\circ}C$-30psu) for the best growth of CB-MAL22. The euryhaline and nitrogen-fixing CB-MAL21 strain thus can be a candidate laboratory culture for the future cyan bacterial marine biotechnology in temperate coastal waters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.93-98
• /
• 2017

The fixing behaviors of raw silk yarns treated with melamine and formaldehyde at a molar ratio of 1:3 for trimethylolmelamine were investigated. Sericin was fixed during the fixing process, but a part of sericin I was removed simultaneously by hot water. The weight losses by fixing and the degumming losses by degumming greatly decreased with increasing concentrations of melamine and formaldehyde. The silk yarns fixed with 0.011 M melamine and 0.033M formaldehyde were significantly degummed due to the insufficient fixation of sericin and the alkaline hydrolysis of sericin by sodium carbonate during the degumming process. On the other hand, the silk yarns fixed with 0.055M melamine and 0.165M formaldehyde were degummed slightly (the degumming losses of 3-8%) due to the strong fixation of sericin, which might result from the many cross-linkages between the sericin I molecules, which were formed by trimethylolmelamine. Those fixed with the fixing solution containing 15% owf softener showed the lowest weight and degumming losses because under the condition of 15% owf softener, the cation of the softener can effectively form ionic bonds with the negatively charged side chain of aspartic acid in sericin. In addition, van der Waals' forces may be also formed between the hydrophobic tail of the softener and the hydrophobic region of sericin, which may help inhibit the removal of sericin I.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.143-155
• /
• 2022

In this study, the response acceleration amplification according to different conditions was analyzed by changing the boundary condition of the soil called LSB (Laminar Shear Box), which is placed on a 1 g shaking table for earthquake simulation experiments. Experiments were carried out with different boundary conditions by fixing both sides of the LSB, and two samples were tested by installing an accelerometer at the same location. In addition, using DEEPSOIL v7 program, a one-dimensional ground response analysis was performed to compare and analyze with the free field condition. As a result, it was confirmed that the acceleration was amplified as it went from the lower layer to the upper layer, and as a result of comparing it with the ground response analysis, it was confirmed that it appeared similar to the analysis under the free field condition. As a result of the SA (Spectrum acceleration) analysis, a result similar to that of the ground response analysis was obtained, and in the case of fixing, it was confirmed that the PSA (Peak Spectral Acceleration) was further amplified.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.193-199
• /
• 2016

The research discussed experimental results on slip resistance force of rafter-purlin connection of plastic greenhouse and suggested a test method for evaluating slip resistance performance of the connection. Slip resistance forces were measured by four kinds of constraint conditions for specimens, for example, fixing or rolling the end of specimen. According to tests, it is noticed that constraint condition is able to significantly affect the slip resistance force. From a post-hoc comparison result, slip resistance force of test under fixing ends condition was larger than those under the other three constraint conditions. But the slip resistance force results in the fixing ends condition had greater measure of dispersion and three times of standard deviation than those from other constraint conditions. Based on the results obtained, effect of constraint condition for specimen on the slip test should be studied to enhance reliability of evaluation test of the slip resistance performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.970-976
• /
• 1997

The ultra-precision machining is widely used for final machining process of precision parts, so in this study, mirror surface finishing systems using the micro abrasive film, one of ultra-precision machining method, have to examine mirror surface characteristics of the cylindrical workpiece(SM45) such as surface roughness, workpiece removal and evaluated under the condition varing film feed rate, applied pressure, grinding speed after fixing other condition. It was found that varrious machining condition have significant influences on workpiece removal, surface roughness.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.331-346
• /
• 2022

Reproducing the horizontally homogeneous atmospheric boundary layer in computational wind engineering is essential for predicting the wind loads on structures. One of the important issues is to use fully developed inflow conditions, which will lead to the consistence problem between inflow condition and internal roughness. Thus, by analyzing the previous results of computational fluid dynamic modeling turbulent horizontally homogeneous atmospheric boundary layer, we modify the past hypotheses, detailly derive a new type of inflow condition for standard k-ε turbulence model. A group of remedial approaches including formulation for wall shear stress and fixing the values of turbulent kinetic energy and turbulent dissipation rate in first wall adjacent layer cells, are also derived to realize the consistence of inflow condition and internal roughness. By combing the approaches with four different sets of inflow conditions, the well-maintained atmospheric boundary layer flow verifies the feasibility and capability of the proposed inflow conditions and remedial approaches.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.35-45
• /
• 1994

The monobath method is accomplished using chemical solution, as processing in a developing and fixing at the same time, into which the exposed photographic material is placed. For this study, we appointed some values to be a standard that to coming as a results by normal processing with the developer D-76 for film Fuji Neopan SS 35mm, and which is compared with a monobath process. The experimental results show that processed condition is useful and applicable in monobath, for FX-6a and Keelan No.315.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1096-1101
• /
• 1992

In order tominimize fixing error of workpieces, circle, prismatic, sphere, cylindrical and sculptures types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table meas the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alognment of NC program to workpiece ste-tp condition via the generation of NC progarm. A postprocessing module is alos developed for generating NC-part program(User Macro) to compensate for machining errors in end milling and boring processes. Developed method are verified by experiments.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.34-42
• /
• 1997

A laboratory experiments were performed to investigate the treatment of photographic processing wastewater by chemical oxidation and biological treatment system. The effect of reaction conditions such as hydrogen peroxide dosage, ferrous sulfate dosage and pH on the COD removal in Fenton oxidation were investigated. The optimal dosage of hydrogen peroxide was 2.58 M and 3.87 M for the developing and fixing process wastewater, respectively. The Fenton oxidation was most efficient in the pH range of 3-5 and the optimal condition for initial reaction pH was 5 for a developing process wastewater. With iron powder catalyst, the COD for a developing process wastewater was removed in lower pH than with ferrous sulfate catalyst. The removal efficiency of COD for refractory compounds such as Diethyleneglycol, Benzylalcohol, Hydroxylamine Sulfate, Ammonium Thiosulfate, Ammonium Ferric EDTA and Disodium EDTA in the photogaphic wastewater was found than 90% except Potassium Carbonate. When the photographic processing wastewater after pretreatment by Fenton oxidation was treated with batch activated sludge process, the addition of $KH_2PO_4$ as a phosphorous compound improved the removal efficiency of COD. During the continuous biological treatment of developing and fixing process wastewater after pretreatment by Fenton oxidation, the effluent COD concentration less than 100 mg/l was obtained at 0.425 and 0.25 kgCOD/m$^3$.d, respectively.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.