• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.677-686
• /
• 2011

This study proposes a formula to calculate length of river bed protection through experimental research and an experimental plant has been installed to investigate the parameters which influence the length of scouring in the river after overflowing the weir. Through hydraulic experiments, the critical velocity, difference of water level between upstream and downstream and height of weir have been selected as independent variables. And new formula to calculate a length of river bed protection is suggested as the result of this study in the consideration of complex weir that consists of movable and fixed weir. The new formula is verified through additional experiments. Results of this study can be used for weir structures' construction and maintenance plans.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1495-1505
• /
• 2014

The objective of this study was to evaluate survival rate and fish movement (migration) using a tagging approach of passive integrated transponder (PIT) in Juksan Weir, which was constructed as a four major river restoration projects. For this study, survival rates of each fish species and the mobility of fish individuals were analyzed during 2 weeks by the insertion of PIT tags to various fish species in the laboratory. According to tagging tests in the laboratory, the survival rate 37.5% (30 survivals of 80 individuals) after the insertion of PIT tags. The survival rate of Carassius auratus and Hemibarbus labeo was 100% and 80% after the insertion of the tags, respectively, whereas it was only 13.3% for Zacco platypus. In the field experiments of Juksan Weir, 6 species and 157 individuals from 8 species (563 individuals) were detected in the fixed automatic data-logging system, indicating a detection rate of 27.9% in the fishway of Juksan Weir. In the meantime, some species with no or low detection rates in the fixed automatic data-logging system were turn out to be stagnant-type species, which prefer stagnant or standing water to live.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.133-140
• /
• 2016

Most small weir installed in Korea is concrete solidated weir. Fixed weir causes stagnant flow, which leads to deposit sediment just upstream of weir. As time goes on, it would induce reduction of water storage capacity and invoke the serious water quality issues. Therefore, there has been a growing interest in movable weir. Especially, the flexible rubber weir is easy to install and possible to operate in extreme environments. However, even though this type can be flatable, it is also not free from sediment deposition problem. Thus, to enhance the ability of releasing deposition the bypass pipe was constructed underneath it. In this study the performance of its ability was examined with hydraulic model test. This bypass pipe was designed with 3 different dimensions to connect between each bottom of upstream and downstream of a weir, such as Type A, B, and C. The efficiency of drainage of deposition upstream was studied under two water of upstream and sediment heights. In addition, the ability of sediment emission through the bypass pipe after the pipe was blocked by debris like soil, vegetation et al. was examined by video monitoring. From this study, it was suggested a dimensionless equation which show the relationship of variable parameters and amount of emission sediment through bypass pipe. And it was found that the most significant factors on efficiency of releasing were elbow angle and discharge, and the ability of emission when the pipe was blocked was most highly influenced in tilting length.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.961-969
• /
• 2016

Due to the recent requirement of installing low-head structures considering environmental aspects, various types of fixed weir have been suggested. However, the design guideline of transverse structures for practical application is very limited. The purpose of the present study is to analyze the hydraulic properties of the fixed weirs installed at the small and middle sized rivers of Korea depending on the physical specifications to provide fundamental data that may be reflected to the design of a low-head fixed weir considering the relevant environmental aspects. The basic discharge coefficient of slope-type and step-type weirs depending on change of crest was estimated, and a stage-discharge curve was developed. In addition, the flow properties under free flow and submerged flow conditions were analyzed by varying the hydraulic conditions such as discharge and crest.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.541-552
• /
• 2004

In this paper, ascending functions of the pool-and-weir fishway which has been established for the upstream migration of migratory fish at Jamsil Weir in the lower part of the Han River was assessed by applying tile Existing Fishway Measurement Method, and measures to improve these functions were suggested. The primary fish which ascended the fishway during the period of measurement was Erythroculter erythropterus Basilewsky, greater than 29cm in the body length. A total of 361 individual fish were collected with traps established at the exit of the fishway The maximum ascending capacity for the fish was 2.53${\times}$10^{-3}$ fish/hr/g. The fishway of Jamsil Weir does not satisfy the various fish species inhabiting in the river. Especially, small fishes of lower swimming ability may not ascend the fishway because the difference in water levels between upper and lower pools in the fishway was too large at the exit and there was too much discharge flowing into the fishway. This fishway does not have a roll in the ascending function for other species except Erythroculter erythropterus Basilewsky and Hemibarbus labeo Pallas, for which swimming ability is great. In order to improve the ascending function of the fishway, the structures of the fishway need to be changed so that various species in the river can easily ascend and the fishway function be taken into consideration in operation of the gates of the weir. Additional construction of fishways on both sides of the lower flow channel are needed to correct a decline in the fishway effectiveness due to continuous flow over the fixed part of the weir.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.821-834
• /
• 2015

This study presents the analysis of flow and bed change characteristics considering bed protection work built on the immediate downstream of weir to protect river bed from scouring. The study area is 37km reach from Hyunpoong station to Masuwon station including Hapcheon- Changryoung multi-function weir in the Nakdong river. CCHE2D model is calibrated and validated for evaluating the flow and bed change characteristics during Typhoon Kompasu in 2010. Three simulation conditions are set up: Case 1 is a natural channel without installation of weir. Case 2 involves an installation of weir in the natural channel. Case 3 involves an installation of weir with bed protection in the natural channel. Flood frequency (50, 100 and 200yr) is applied to each scenario to analyze the effects of bed protection work. While the sediment rate is increased in the downstream of fixed gate and sluice-type gate, river bed scouring rate is increased in the downstream of lift-type gate in Case 2 comparing with the results of Case 1. The river bed scouring is not occurred in the immediate downstream of weir (~30m) due to the effect of bed protection, but larger amount of sediment is occurred in the downstream of weir (60m~) which the bed protection is not installed comparing with the results Case 1. Through the results of simulation considering bed protection work, this study would be helpful to expect bed change and operate the weir as well as manage.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.10
• /
• pp.563-572
• /
• 2015

The purpose of this study was to model the effect of flushing discharge on algae removal by multi-purpose weir operation in Yeongsan River (Seungchon Weir) using a 3-dimensional (3D) model. The chlorophyceae Eudorina sp. formed bloom in May 2013. Flushing discharge was conducted in two different ways for algal bloom reduction. To elucidate the spatial variability, a high-resolution 3D model, ELCOM-CAEDYM, was used to simulate the spatial variations of water quality and chl-a over a month. The results showed that ELCOM-CAEDYM could reproduce highly spatially resolved field data at low cost, and showed very good performance in simulating the pattern of algal bloom occurrence. The effect of each flushing discharge operation was analyzed with the results of modeling. The results of case 1, flushing discharge using an open movable weir, showed that the algal bloom between the Seochang Bridge and the Hwangryong River junction is rapidly flushed after operating the movable weir, but the residual algae remained in the weir pool as the discharge decreased. However, the results of case 2, fixed weir overflow with a small hydropower stop, showed that most of the algae was removed after flushing discharge and the effect of algae removal was much bigger than that in case 1, as per modeling results and observed data.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.52-60
• /
• 1991

This study was conducted to investigate the appropriate operation method minimizing the deviation between irrigation water demand and release from the reservoirs, and the simulation technique was used in the operation model. This model was applied to the grouped reservoirs system consisted of Dongsang, Daia and Keungchun reservoirs and Eowoo-weir in Chonbuk FLIA district. The results obtained in this study are summarized as follows; 1.The area above the Eowoo weir point was divided into 6 small watersheds, and daily inflows from each watershed were calculated by Tank model. It showed that the average annual runoff ratio was 40-60% respectively. 2.Based on the Blaney-Criddle formula daily water requirement of Chonbuk FLIA irrigation area was estimated, mean water requirement for paddy field during the irrigation period was 818.lmm. 3.Using the basic data such as inflow and water demand, four different release types were selected. Through the simulated operation the difference between intake water required at Eowoo-weir point and release from the 3 reservoirs was estimated. The best result was obtained when Daia and Keungchun reservoirs are operated parallelly at fixed release ratio and the release of Dongsang reservoir was determined according to the storage of Daia reservoir.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.510-510
• /
• 2015

우리나라는 1960년대 경제개발에 의한 산업화 이후, 토지이용이 꾸준히 확대되어 왔으며, 이로 인해 불투수면적 증가하였고, 배수시설의 확장은 표면조도계수 및 침투율을 급격히 감소시키는 요인으로 작용하여 우수 및 오수의 유출속도가 증가하여 홍수방어능력이 감소하였다. 또한 기후변화로 인한 국지성 집중호우의 발생빈도가 증가함에 따라 이로 인한 피해가 더욱 가중되고 있다. 현재 이에 대한 대응능력을 갖추기 위한 치수대책을 꾸준히 실시하고 있으나 주로 홍수량을 줄이기 보다는 증가하는 홍수량을 처리하기 위한 하천정비, 하수관, 유수지 및 펌프장 증설을 중심으로 이루어지고 있다. 이는 하천 하류의 홍수량을 증가시켜 하천주변에 침수피해를 일으키고 있어 보다 항구적인 대책이 요구되고 있다. 본 연구에서는 특정유역에 침수가 발생할 시 횡월류위어 가동방식(고정보-가동보)에 따라 미치는 침수영향에 대해 저류조 유입특성(총 유입량, 유입유량 첨두치), 침수지역 침수특성(첨두유량, 첨두수위, 첨두유속, 침수면적, 월류시간)을 정량적으로 분석하여 향후 저류지 설치에 따른 횡월류위어 가동방식 선정에 기여하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.135-146
• /
• 2007

FLDWAV model was modified such that it can adequately simulate the effect of Jamsil and Singok submerged weirs in the main reach of the Han River. The enhanced model combines weir-type discharge equations for overflow at fixed weir and Manning equation for fluvial-type flow at the movable weir. Equations for weir overflow include those for submerged weir flow and free overflow. Gates of the movable weir may be open or closed for the simulation. In order to test the simulation capabilities, the enhanced model was applied for various flow conditions at submerged weirs. Backwater effect due to Jamsil and Singok submerged weirs were well simulated. Simulations were carried out for spring and neap tides extracted from artificial tide generated by combining $M_2\;and\;S_2$ tidal constituents. Simulation results cleared indicated that tidal effect extends further upstream as the flood discharge decreases. Low flow simulation capabilities of the enhanced model was tested. Discontinuities of water surface elevation due to the submerged weirs were successively simulated.