• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.145-153
• /
• 1989

The causes of the missing teeth are classified as congenital missing, trauma and extraction due to dental caries, variable problems are occured clinically by the missing teeth. The missing of the upper incisors especially would assume a serious aspect, and could be treated by three methods of orthodontic treatment, prosthodontic treatment and autotransplantation of the premolar teeth. The patient of this report had the skeletal class II malocclusion with the left upper central incisor missing, and have been treated with the fixed appliance after extraction of the right upper central incisor and both lower second premolars. The results were obtained as follows: 1. Treatment was done for 1 year 6 months. 2. Normal overbite and overjet were achieved. 3. Cuspal interdigitation was obtained normally. 4. Space problem was resolved with resin restoration of the upper lateral incisors. 5. The upper canines were used as the upper laterals after cuspal contouring. 6. Retention would be required with adequate retainers for a long time to prevent relapsing after treatment.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.86-91
• /
• 2002

Purpose: This study was designed to evaluate whether the method "Distal pulling with wire" after primary repair of Achilles tendon, can result in early restoration of ankle motion. Materials and Methods: In 14 cases of tendocalcaneus repair, the proximal stump was pulled down distally by wire and fixed the ends of wire to the transcalcaneal K - wire. We evaluated the range of motion of ankle joint at 4th, 6th, 12th week in 10 patients whom we followed up for more than 1 year. We evaluated the results of Achilles tendon repair by Hooker's criteria. Results: Range of motion of ankle joint revealed as follows. Degree of mean dorsiflexion improved - $5.1^{\circ},\;15.0^{\circ},\;22.4^{\circ}$ at 4th, 6th and 12th week respectively, while plantarflexion improved $21.5^{\circ},\;32.7^{\circ}$ and $42.3^{\circ}$ respectively. At one year follow up, seven of them had no problems in active daily life and sports activities. According to Hooker's criteria, the result rated excellent in nine, satisfactory in one. Conclusion: Early gain of ankle joint motion was possible by "Distal pulling with wire" after primary repair of Achilles tendon.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.698-708
• /
• 2001

This study was to evaluate the clinical evidence for the success and the predictability of the osseointegrated dental implants in the partially edentulous Korean patients. 201 patients have received total of 502 Branemark implants, which were restored with either single or multiunit fixed superstructures at the Implants Clinic, Yonsei University Dental Hospital. The clinical and radiographic evaluations carried out on the patients for maximum 8 years were assessed annually for peri-implant inflammation, implant mobility (PTV), Plaque Index (PI), Gingival Index (GI), Bleeding on Probing (BOP), Keratinized Mucosa width and any changes in the surrounding bone level. The radiographs were taken at completion of the restoration, and annually thereafter. On the last recall appointments the patients filled a questionnaire consist of 29 questions in four categories. The cumulative non-failure rate of success was 93.9%. The first year mean bone loss was 0.3mm and less than 0.2mm annually thereafter. The periodontal parameters, keratinized tissue width and periotest values stabilized after initial changes in the first few years. The questionnaire has shown general satisfactory responses in all four aspect of dental implants treatment, including chewing efficacy, comfort, aesthetics and speech. The results support the predictability and success of the long-term rehabilitation of implant supported prostheses in partially edentulous Korean patients.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3239-3267
• /
• 2018

Image and video dehazing is a popular topic in the field of computer vision and digital image processing. A fast, optimized dehazing algorithm was recently proposed that enhances contrast and reduces flickering artifacts in a dehazed video sequence by minimizing a cost function that makes transmission values spatially and temporally coherent. However, its fixed-size block partitioning leads to block effects. The temporal cost function also suffers from the temporal non-coherence of newly appearing objects in a scene. Further, the weak edges in a hazy image are not addressed. Hence, a video dehazing algorithm based on well designed spectral clustering is proposed. To avoid block artifacts, the spectral clustering is customized to segment static scenes to ensure the same target has the same transmission value. Assuming that edge images dehazed with optimized transmission values have richer detail than before restoration, an edge intensity function is added to the spatial consistency cost model. Atmospheric light is estimated using a modified quadtree search. Different temporal transmission models are established for newly appearing objects, static backgrounds, and moving objects. The experimental results demonstrate that the new method provides higher dehazing quality and lower time complexity than the previous technique.

• The Journal of the Korean dental association
• /
• v.49 no.9
• /
• pp.527-534
• /
• 2011

Microvascular reconstruction of maxillary composite defect after oncologic resection has improved both esthetic and functional aspect of quality of life of the cancer patients. However, a lot of patients had prior surgery with radiation and/or chemotherapy as a part of comprehensive cancer treatment. Sometimes it is nearly impossible to find out adequate recipient vessel for maxillary reconstruction with microvascular anastomosis. Therefore long pedicle of the flap is needed to use distant neck vessels located far from the reconstruction site such as ipsilateral transverse cervical artery or a branch of contralateral external carotid artery. For this reason, although we know the treatment of the choice is osteocutaneous flap, it is difficult to use this flap when we need long pedicle with complex three dimensional osseous defect. Vascular option for these vessel-depleted neck patients can be managed by a soft tissue reconstruction with long vascular pedicle and additional free non-vascularized flap that is rigidly fixed to remaining skeletal structures. For this reason, maxillofacial reconstruction by vascularized soft tissue flap with or without the secondary restoration of maxillary bone with non-vascularized iliac bone can be regarded as one of options for reconstruction of profound maxillofacial composite defect resulted from previous oncological resection with chemo-radiotherapy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.279-282
• /
• 2012

In this paper, a hardware architecture of phase calculator for 3D image processing is proposed. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. Phase calculator designed in Verilog HDL is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.350-353
• /
• 2013

In this paper, a hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is proposed. The designed phase calculator, which adopts redundant binary number systems and a pipelined architecture to improve throughput and speed, performs arctangent operation using vectoring mode of DCORDIC algorithm. Fixed-point MATLAB simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification, and the estimated performance is about 7.5 Gbps at 469 MHz clock frequency.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.72-82
• /
• 2014

The Contemporary paradigm to understand the complexity and diversity is moving to 'Becoming' that taken place in reviewing at the relation of various concepts. In Japan, After the collapse of modern architecture has been declared 'Metabolism' was appeared. They tried to apply organism's metabolic system to buildings based on ecological thoughts. But Metaboilsm's projects had revealed limitations of representation that the city on the mechanical system became a huge scale. As a result, It caused a break the cultural context of the region in Japan. After then, Japanese Architects expressed a pluralistic aspects of modern society for the restoration of disconnected cultural context. From this perspective, The thought of 'becoming' is a new role for Contemporary Japanese Architect. This research is focused of projects of SANAA, Ito Toyo, Sou Fujimoto, because they have spatial thought about realizing the space through the ways organizing the various potential possibilities in the simple external form not stimulated. They are realize the 'becoming-space' within the architecture. This 'becoming-space' gives people in building the new characteristics and experience that potential interactions among user, architecture and nature. It is non-representational space not fixed, but changing organically and variably.

• Clinics in Shoulder and Elbow
• /
• v.24 no.3
• /
• pp.183-188
• /
• 2021

We report a case of a 69-year-old right-dominant man who had an open Monteggia-like lesion of the right elbow (Gustilo-Andersen IIIA) with severe proximal ulna bone loss associated with an ipsilateral ulnar shaft fracture due to a motorcycle accident. The patient underwent two-stage surgery. Wound debridement and bridging external fixation were performed at first. Three months later, a frozen massive osteochondral ulnar allograft was implanted and fixed with a locking compression plate. A superficial wound infection appeared 5 weeks after the second surgery. Superficial wound debridement, negative pressure therapy, and antibiotics were administered for 3 months, achieving infection healing. At 3 years post-surgery, the elbow range of motion was satisfactory with a Disabilities of the Arm, Shoulder and Hand (DASH) score of 16.7. Radiographs and computed tomography scans showed good allograft-bone integration without allograft reabsorption or hardware loosening. Although not complication-free, massive ulna osteochondral allograft implantation can be considered a valid option in cases of open Monteggia-like lesions associated with ulnar shaft fracture and severe bone loss in active patients, whenever osteosynthesis or joint replacement is not a proper solution. This type of bone stock restoration allows for future surgery, if needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.