• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.85-90
• /
• 1996

In the word, there is varied types of vibration, and these affect the mechanical industry. In this paper is plates with two parallel sides fixed. Electronic speckle pattern interferometry (ESPI) is one of the optical nondestructive testing technique. By using the ESPI, vibration modes for excitation point, a/b(ratio of longuitudinal and lateral length), and kind of specimen are measured and compared qualitatively with theoritical analysis that Warburton proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.17-24
• /
• 2003

Chemical mechanical polishing(CMP) has been applied for planarization of topography after patterning process in semiconductor fabrication process. Tungsten CMP is necessary to build up interconnects of semiconductor device. But the tungsten dishing and the oxide erosion defects appear at end-point during tungsten CMP. It has been known that the generation of dishing and erosion is based on the over-polishing time, which is determined by pattern selectivity. Fixed abrasive pad takes advantage of decreasing the defects resulting flam reducing pattern selectivity because of the lower abrasive concentration. The manufacturing technique of fixed abrasive pad using hydrophilic polymers is introduced in this paper. For application to tungsten CMP, chemicals composed of oxidizer, catalyst, and acid were developed. In comparison of the general pad and slurry for tungsten CMP, the fixed abrasive pad and the chemicals resulted in appropriate performance in point of removal rate, uniformity, material selectivity and roughness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.220-220
• /
• 2009

In case of favourable irradiation conditions, the ratio of irradiation to the total irradiation went up and then the irradiation increased in the area with high angle of inclination. The study showed that on a clear day with the irradiation of more than $800[W/m^2]$, the pattern of alternating current power change in the fixed system was similar with that in the single-axis tracker. On the contrary, in case of unfavourable irradiation conditions, the ratio of diffuse irradiation to the total irradiation went up and then the horizontal irradiation increased. In the demo system, the fixed system, the single-axis tracker and the dual-axis tracker all had low generation power and similar generation pattern with each other. The study showed the generation power varied with the irradiation in the fixed system, while in the single-axis tracker and the dual-axis tracker, the amount of the generation power variation was much more than the irradiation variation. The demo system was operated from 11:00 AM to 2:00 PM for generating power, during which time, 46[%] to 56[%] of the total generation power was produced. In this study. the generation power was increased by 147[%] in the fixed system, by 136[%] in the single-axis tracker, and by 164[%] in the dual-axis tracker, and the pattern of generation power was similar with the generation power variation in the situation where the irradiation increased by 140[%] in the spring with plenty of insolation. The alternating current power was more sensitive to variation of the irradiation than to that of the surface temperature of a module. The variation of the irradiation had a more positive effect on the generation power than the type of array.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.271-274
• /
• 2001

Recently, most vehicles has the Automatic transmission system as their transmission system. The automatic transmission system operates with fixed shift patterns. In the opposite of manual operation, it is easy and convenient for driving. Though these merit, the system can not evaluate the driver's intension because of usage of fixed shift pattern, To consider driver's intension, we must consider both the driving intensity of driver and the status of vehicle. In this paper, we developed flexible automatic transmission system by using the proposed moduled neural networks which can learn the status of the vehicle and driver's intensity As a result, we compare the transmission system using fixed shift pattern and the proposed transmission system and show the good performance in the change of shift position.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.49-56
• /
• 2013

Purpose: The deformation characteristics induced by non-destructive stresses using piezoelectric transducer(PZT) were analyzed for 3-unit fixed partial dentures manufactured PFM, Everest(CAD/CAM) and Zirkonzahn(copy milling, MAD/MAM) by electron speckle pattern interferometery(ESPI). Methods: The ESPI analysis after loading the restoration with PZT by applying electric voltage of 900mV at the points of 10 mm above the base of the prostheses. Results: PFM and All-Ceramic Everest prostheses showed about 0.1 ${\mu}m$ while that of All- Ceramic Zirkonzahn prostheses showed 0.085 ${\mu}m$, demonstrating that Zirkonzahn displaced less. For PFM and All-Ceramic Zirkonzahn prostheses, the displacements were large at just below the loading point, while generalize displacement was shown over the loading point and weak connector areas for All-Ceramic Everest prostheses. Conclusion: We could find that the deformation characteristics induced by non-destructive stresses using PZT analyzed by ESPI were similar to the fracture strengths evaluated using universal testing machine.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.196-200
• /
• 2007

In this paper, we propose and discuss the design using a simple method that reduces the fixed pattern noise(FPN) generated on the amorphous Si($\alpha-Si$) bolometer. This method is applicable to an IR image sensor. This method can also minimize the size of the reference resistor in the readout integrated circuit(ROIC) which processes the signal of an IR image sensor. By connecting four bolometer cells in parallel and averaging the resistances of the bolometer cells, the fixed pattern noise generated in the bolometer cell due to process variations is remarkably reduced. Moreover an $\alpha-Si$ bolometer cell, which is made by a MEMS process, has a large resistance value to guarantee an accurate resistance value. This makes the reference resistor be large. In the proposed cell structure, because the bolometer cells connected in parallel have a quarter of the original bolometer's resistance, a reference resistor, which is made by poly-Si in a CMOS process chip, is implemented to be the size of a quarter. We designed a ROIC with the proposed cell structure and implemented the circuit using a 0.35 um CMOS process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.954-961
• /
• 2013

In this paper, we propose a new learning method using a variable learning to improve pattern recognition in the FCSR(Fast Commit Slow Recode) learning method of the Fuzzy ART. Traditional learning methods have used a fixed learning rate in updating weight vector(representative pattern). In the traditional method, the weight vector will be updated with a fixed learning rate regardless of the degree of similarity of the input pattern and the representative pattern in the category. In this case, the updated weight vector is greatly influenced from the input pattern where it is on the boundary of the category. Thus, in noisy environments, this method has a problem in increasing unnecessary categories and reducing pattern recognition capacity. In the proposed method, the lower similarity between the representative pattern and input pattern is, the lower input pattern contributes for updating weight vector. As a result, this results in suppressing the unnecessary category proliferation and improving pattern recognition capacity of the Fuzzy ART in noisy environments.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.51-56
• /
• 2019

In this paper, we propose an algorithm that can quickly generate and synthesize city maps in racing games. Racing games are characterized by moving a wide map rather than a fixed map, but designing and developing a wide map requires a lot of production time. This problem can be mitigated by creating a large map in the preprocessing step, but a fixed map makes the game tedious. It is also inefficient to process all the various maps in the preprocessing step. In order to solve this problem, we propose a technique to create a terrain pattern in the preprocessing process, to generate a map in real time, and to synthesize various maps randomly. In addition, we reduced unnecessary rendering computations by integrating view-dependent techniques into the proposed framework. This study was developed in Unity3D and can be used for various contents as well as racing game.

• Journal of the Korean Home Economics Association
• /
• v.39 no.10
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.195-213
• /
• 2014

Recently, the horizontal axis rotor performance optimizer (HARP_Opt) tool was developed in the National Renewable Energy Laboratory, USA. This innovative tool is becoming more popular in the wind turbine industry and in the field of academic research. HARP_Optwas developed on the basis of two fundamental modules, namely, WT_Perf, a performance evaluator computer code using the blade element momentum theory; and a genetic algorithm module, which is used as an optimizer. A pattern search algorithm was more recently incorporated to enhance the optimization capability, especially the calculation time and consistency of the solutions. The blade optimization is an aspect that is highly dependent on experience and requires significant consideration on rotor control strategies, wind data, and generator type. In this study, the effects of rotor control strategies including fixed speed and fixed pitch, variable speed and fixed pitch, fixed speed and variable pitch, and variable speed and variable pitch algorithms on optimal blade shapes and rotor performance are investigated using optimized blade designs. The effects of environmental wind data and the objective functions used for optimization are also quantitatively evaluated using the HARP_Opt tool. Performance indices such as annual energy production, thrust, torque, and roof-flap moment forces are compared.