• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.586-606
• /
• 2023

This study initiated research aligned with the body positivity movement, aiming to explore size diversity for groups facing relative size discrimination due to their deviation from average body types. Using KS adult women's apparel dimensions as a reference, jackets were developed for women in their 20s to 30s who belong to the small petite-size (S[P]) category, which is characterized by a height under 155cm (petite) and a bust-circumference from 72cm to less than 82cm (small). Using 3D virtual-fitting, we conducted experiment-pattern production and refinement and subsequent real-fitting evaluations by participants to objectively validate aesthetics and comfort. The study's findings are as follows: First, utilizing a 3D virtual-fitting program by identifying 'creases' and 'garment pressure points' in the jacket appearance, experiment patterns were refined and real jackets were produced. This approach addressed challenges in recruiting participants with specific body types and allowed for efficient research in terms of cost and time. Second, through real-fitting evaluations, basic-fit and slim-fit jackets labeled as <79-88-150> were developed for the S(P) size. we presented 'size spec' and 'ease allowance' for jackets by waist fit. Both fits received positive evaluations with approximately 53.5cm sleeve length, and 11.7cm shoulder length. The ease allowances for the basic-fit jacket were approximately 9.2cm at the bust circumference, 12.8cm at the waist circumference, and 6cm at the hip circumference. Similarly, the slim-fit jacket exhibited ease allowances of about 4.8cm at the bust circumference, 4cm at the waist circumference, and 4cm at the hip circumference, receiving positive evaluations for aesthetics and comfort.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.175-187
• /
• 1998

Hats are an important part of the fashion accessory business and Their importance is increasing year by year. Their importance is increasing not only as a means of accessory ut also as a means of sportswear due to the leisure-sports boom of the 90's. As hats are becoming more and more popular and ready-made, demand for comfortable and easy-fitting hats are increasing. Being an piece of apparel, fitting is very important factor in hats as well s in other forms of clothing. But many hat-wears complain of dissatisfaction of fitting of their hats. In addition to this, another problem is hat most hat designs have been flown in from the West without inspection of their fits. Designs to fit the Koran face and head have not been developed properly. This study is based on the need for the development of a well-fitting hat pattern design for Korean young women. After taking actual measurements of 170 young womens, a size system was organized for developing patterns for different size groups.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.451-458
• /
• 2013

In this paper, we have developed an intellectual sizing and fitting system for bike user. In order to prevent the disease, we should adjust the bike's frame and select several components in the body size. Then it propose an extractions algorithm of avatar imagination with the cromakey method and realize the sizing and fitting.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.4
• /
• pp.375-384
• /
• 2015

Recently, there has been a gradual increase in the number of people who are interested in cycling, leading to an increasing number of cycling equipment consumers. However, many bicyclists get hurt because of their lack of knowledge about the right size of bicycle for their body. Although it is necessary for a rider to fit their bicycle to prevent injury, they reject a fitting service because of the long hours and high cost. In this study, we propose a bicycle fitting system that uses a depth camera to improve the limitations of existing manual fitting systems. With the defined formula, the system calculates the size of the bicycle using body image information extracted by a depth camera and visualizes a customized bicycle for a specific consumer. This system will not only save the customer time and money, but will prevent injury from the use of a bicycle that does not fit.

• Journal of the Korean Society of Costume
• /
• v.58 no.1
• /
• pp.133-150
• /
• 2008

The purpose of this study was to recognize of the sizing system and analyze the fitting on formal pants of the on-line shopping mall for plus-sized women. To pursue this purpose, the investigation of the sizing system was focused on 22 online companies. The formal pants of 7 companies was selected among them. And actual sizes were compared with the guidance sizes of goods. For the assessment about the fitting on formal pants of 7 online companies, these came to make on to 16 obese women with 'A' body shaped and 'O' body shaped. A data analysis used the SPSS 14.0 statistics program. To verify the difference, this study used the variance analysis and Duncan's test for the postmortem verification. The result was as follows. 1. All of 22 companies were using the symbol such as 88, 99, 100 and 110 in the present condition of sizing system. The information about products size was presenting the products size not to be the body size. the guidance sizes of products were different from actual sizes of 7 companies to be assorted. Therefore, the guidance sizes of goods could not accomplish the facility. 2. According to the fitting-tests by the sensory assessment, the obese women with 'A' body shaped, did the dissatisfaction at the items of the hip circumference, abdominal region, crotch deep and pants length. The obese women with 'O' body shaped, did the dissatisfaction at the the items of crotch deep and pants length.

• Journal of Fashion Business
• /
• v.8 no.5
• /
• pp.85-99
• /
• 2004

The purpose of the study is to survey the current state of tween generation boys' clothing-wearing, to identify problems in the current apparel sizing system, and to contribute to the improvement of the fitness of ready-made clothes. 1. According to the result of surveying the current state of clothing-wearing, boys prefer casual wear and, as they grow old, they tend to purchase clothes alone or in company with their friends. In addition, they use mainly easy casual wear or sports wear stores. They appear to be highly dissatisfied with price and size and think that the fitting of coats, pants and jackets is poor. Moreover, they complain about sizes such as waist circumference, pants length and upper-arm circumference. 2. According to the result of comparing apparel sizing system with body measurements, the waist circumference and hip circumference of young casual wear are fit to the large size of body at the age of 12 and the over-average size of body at the age of 13 and 14, but its bust circumference is fit only to the extra-large size of body at the age of 13 and 14. Such results come from differences in body shape between adults and adolescents. Although adolescents' body size has been enlarged, their body line is still immature and, accordingly, their drop-value is smaller than that of adults, which appears to cause adolescents to be highly dissatisfied with fitting.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.278-286
• /
• 2015

Fashion industry has tried to adopt the virtual garment technology to reduce the time and effort spent on sample creation. For garment manufacturers to adopt the virtual garment technology as an alternative to sample creation, 3D avatars that meet the needs of each brand should be developed. Virtual garment softwares that are available in the market provide avatars with standardized body models and allow to modify the size by manually entering size specifications. This study proposed a methodology to develop size specifications for 3D avatars as well as brand-customized production sizes. For this, a man's fashion brand which is using virtual garment technology is selected. And the Size Korea database is used to develop size specification based on the customers' body shape. This study developed regression equations on body size specifications, which in turn proposed a regression model to proportionately change size specifications of 3D fitting-models. Based on the each body size calculated by the regression model, a standard model is created, and the skeleton-skin algorithm is applied to the regression model to obtain the results of size changes. Then, the 3D model sizes are tested for size changes as well as measured, which verifies that the regression model reflects body size changes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.137-156
• /
• 2013

The purpose of this study is to analyze the general status of wearing clothes and clothing purchase of middle-aged women in the 40's to 50's, the patterns and colors of clothes they prefer, clothing preference related with fitting or such, and also complaints. And this paper also divides the middle-aged women into those in the 40's and 50's to analyze how they differ in terms of the apparel brands and fitting they prefer and also the status of wearing clothes. For the research, a survey was performed to 350 women, and the survey data went through x2 and t-test analysis by using SPSS 20.0 to examine significant difference. The results of this study are as follows: the women in the 40's included as the subjects showed a high frequency of clothing purchase from casual brands or SPA brands and regarded design to be important at the clothing purchase. Meanwhile, the women in the 50's indicated a higher frequency of clothing purchase of middle-aged women's apparel brands, outdoor brands, madam clothes, or designer brands and thought activity to be crucial at the clothing purchase. As the women in the 40's and 50's showed difference in the brands they preferred, particularly the fitting indicated difference in terms of dissatisfaction. While those in the 40's preferring and buying young casual showed particularly more fitting problems in the arm-hole girth, upper arm circumference, bust size, and thigh or hip area, those in the 50's indicated fitting problems in the hip circumference or waist measurement. It is expected that this study will be used as foundational data to set up the target age by related apparel companies or develop clothes with great size fitting and design satisfaction.