• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2009

The Samcheonpo ocean small hydropower plant (SHP) has a special feature of using marginal hydraulic head of circulating water system of fossil fuel power plant as a power source and having the characteristics of general hydropower generation and tidal power generation as well. Also, it contributes to reducing green house gases and developing clean energy source by recycling circulating water energy otherwise dissipated into the ocean. The efficiency of small hydropower plant is directly affected by effective head and flow rate of discharged water. Therefore, the efficiency characteristics of ocean hydropower plant are analyzed with the variation of water level and flow rate of discharged water, which is based on the accumulated operation data of the Samcheonpo hydropower plant. After the start of small hydropower plant operation, definite rise of water level was observed. As a result of flow pattern change from free flow to submerged flow, the instability of water surface in overall open channel is increased but it doesn't reach the extent of overflowing channel or having an effect on circulation system. Performance evaluation result shows that the generating power and efficiency of small hydropower exceeds design requirements in all conditions. Analysis results of CWP's water flow rate verify that the amount of flowing water is measured less and the highest efficiency of small hydropower plant is achieved when the effective head has its maximum value. In conclusion, efficiency curve derived from water flow rate considering tidal level shows the best fitting result with design criteria curve and it is verified that overall efficiency of hydropower system is satisfactory.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.210-220
• /
• 2023

Recently, smart wearable products, including electromyography (EMG) measurement devices and clothing, have been developed to monitor users' exercise levels, muscle activation, and muscle balance more effectively during fitness activities. However, technical and socioeconomic barriers, such as flexibility and durability, still pose challenges in terms of comfort, ease of wear, and wearability of smart clothing, which includes devices and circuits. To address these issues, this study developed a wearable EMG device integrated with clothing to collect valid EMG signals from desired muscles while maintaining comfort, functionality, and ease of wear. After deriving a combined structure that could stably position the wearable device within the clothing, a prototype was manufactured and evaluated for fit, compression, comfort, and exercise comfort test by ten participants (height = 176.2 cm, weight = 76.4 kg, chest circumference = 101.2 cm). The study found that the prototype had smaller circumferences around the chest, waist, and abdomen compared to commercial products, resulting in lower ratings for wearing comfort and ease of wear. However, the prototype received high ratings for fitting, pressure, and the exercise comfort test. Valid signals were obtained when the EMG device was combined to the prototype for the rectus femoris muscle, indicating stable positioning of the device during exercise.

• Journal of Fashion Business
• /
• v.26 no.2
• /
• pp.143-155
• /
• 2022

The purpose of this study was to develop protective clothing that could alleviate fall impacts. Fall impact protection pants for elderly women were designed, and motion adaptable hip pads and knee pads printed by 3D printing were integrated into the pants and evaluated. First, the design of the fall impact protection pants with variable motion was semi-loose fitting pants that could be worn and detached from the protective pad. A pad pocket was made in the lining inside the pants so that the protective pad could be fixed to the protective area. Second, in the evaluation of the appearance of the fall impact protection pants, the wearer group had a good score of 4.60 or higher for all questions on color, material, ease, and fit. In the evaluation of the insertion method of the protective pad, the flexibility of the pad, and the weight of the pad, the subjects' scores were 4.30~4.80. The fit of the fall impact protection pants was excellent in the texture and elasticity of the outside and inside of the pants. There was no discomfort due to the pad(4.60), and no difficulty in movement during wearing activities was reported. During squatting, it was evaluated as 4.80, indicating that the motion adaptable hip joint and knee pads were highly effective during operation.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.297-304
• /
• 2021

The environmental impact assessment(EIA) project in Korea has undergone changes and revisions in various evaluation items for about 30 years after the introduction of the Environmental Conservation Act (1997). However, despite the importance of land use evaluation items under the current EIA Act, there are insufficient studies to consider. Therefore, this study focused on the land-use evaluation items based on the EIA guidelines, reviewed 90 of the evaluation documents and consultation documents, and tried to suggest implications and supplementary points forthe domestic EIA land-use evaluation items. As a result, the paradigm was changing from land efficiency centered on development in the past to land efficiency centered on the natural environment and resource conservation. However, in spite of the manual for fitting the paradigm change, opinions on the conservation of the natural environment are still being drawn in the consultation document, so it needs improvement. Two improvements in the impact assessment process suggested in this study are the establishment of standardized spatial data and a quantitative impact and reduction method evaluation tool based on it. In particular, there is a need for a plan evaluation tool for land use arrangement and distribution that can solve the needs of minimizing damage to the natural environment and securing green space and a green network.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.37-45
• /
• 2012

Purpose: The change of alignment between RGP lens and cornea according to the lens design was investigated by comparing the areas of fluorescein pattern in central and peripheral regions analyzed by astigmatic degree and corneal type when spherical and aspherical RGP lenses fitted in alignment. Methods: The fluorescein patterns of 90 eyes (19-30 years, $25.12{\pm}3.52$) having with-the-rule astigmatism were analyzed after spherical and aspherical RGP lenses fitted in alignment. Then, their fluorescent areas in central and peripheral regions were calculated and compared for the quantitative evaluation. Results: The case showing concordant base curve between spherical and aspherical RGP lenses in alignment fitting was 72% however, the possibility to have same base curves between spherical and aspherical RGP lenses in alignment fitting was to be less in the case of symmetric bowtietyped cornea and high astigmatism. The fluorescent area in peripheral region of aspherical RGP lens in alignment fitting was smaller than it of spherical RGP lens. Peripheral fluorescent areas in both RGP lenses decreased according to the increase of astigmatic degree and peripheral area in symmetric bowtie-typed corea was smaller than round-typed cornea's peripheral area. In the case of same astigmatic degree, peripheral fluorescent area of aspherical RGP lens was smaller in both corneal types. Conclusions: The results above suggest the changing degree in the alignment between RGP lens and cornea can be varied according to lens design, corneal astigmatism and corneal type. Thus, the results obtained from the quantitative analysis of the alignment between lens design and cornea may be used as the basic information about the establishment of guidelines for RGP lens fitting, the development of proper lens design, and different tear volume in partial regions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.1 s.26
• /
• pp.93-114
• /
• 1988

The purpose of this study was to develop pattern drafting methods of bodice, sleeve and skirt for Korean women at the age of 18 to 34. The study procedures and results were as follows; 1. 305 women aged 18 to 34 were measured on 49 items. 56 items including 49 measured and 7 calculated items were analyzed statistically. 2. New pattern drafting methods were developed based on the results of the data analysis. Basic shells constructed from the patterns were examined through fitting tests for completion. 3. The sensory test was applied to evaluate the new pattern for women by comparing it with one of the most used conventional patterns. An original rating scale was developed and used for the evaluation. According to a statistical analysis of the result of the 53 items on the questionnaire, all the items showed significant difference ($\alpha{\leqq}0.01$ or $\alpha{\leqq}0.05$) between the two, with the new pattern having higher scores. The new drafting method proved to be better fitted at all 53 items, and to be comfortable.

• Structural Engineering and Mechanics
• /
• v.47 no.4
• /
• pp.471-493
• /
• 2013

This paper presents a framework for seismic damage evaluation for Algerian buildings adapted from HAZUS approach (Hazard-United States). Capacity and fragility curves were adapted to fit the Algerian building typologies (Reinforced Concrete structures, Confined or Non-Confined Masonry, etc). For prediction purposes, it aims to estimate the damages and potential losses that may be generated by a given earthquake in a prone area or country. Its efficiency is validated by comparing the estimated and observed damages in Boumerd$\grave{e}$s city, in the aftermath of Boumerd$\grave{e}$s earthquake (Algeria: May $21^{st}$ 2003; $M_w$ = 6.8). For this purpose, observed damages reported for almost 3,700 buildings are compared to the theoretical predictions obtained under two distinct modelling of the seismic hazard. In one hand, the site response spectrum is built according to real accelerometric records obtained during the main shock. In the other hand, the effective Algerian seismic code response spectrum (RPA 99) in use by the time of the earthquake is considered; it required the prior fitting of Boumerd$\grave{e}$s site PGA (Peak Ground Acceleration) provided by Ambraseys' attenuation relationship.

• The Journal of Korea Robotics Society
• /
• v.6 no.4
• /
• pp.334-343
• /
• 2011

This paper presents a new approach for mobile robot heading detection using MEMS Gyro north finding method in the indoor environment. Based on this, the robot heading angle measurement scheme is proposed; improved north finding theory and algorithm are also explained. Several approaches are applied to confirm system's precision and effectiveness. In order to find out the heading angle, a single axis MEMS gyroscope to sense the angle between the robot heading direction and the north is used. To reach enough estimation accuracy and reduce detection time, the least square method (LSM) for the signal fitting and parameter estimation is applied. Through a turn-table, we setup a carouseling system to decrease the substantial bias effect on gyroscope's heading angle. For the evaluation of the proposed method, this system is implemented to the Pioneer robot platform. The performance and heading error are analyzed after the test. From the simulation and experimental results, system's accuracy, usefulness and adaptability are shown.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.473-480
• /
• 2003

In order to control the genetic background noise in QTL mapping, cofactor markers were incorporated in single marker analysis (SMACO) and interval mapping (CIM). A simulation was performed to see how effective the cofactors were by the number of QTL, the number and the type of markers, and the marker spacing. The results of QTL mapping for the simulated data showed that the use of cofactors was slightly effective when detecting a single QTL. On the other hand, a considerable improvement was observed when dealing with more than one QTL. Genetic background noise was efficiently absorbed with linked markers rather than unlinked markers. Furthermore, the efficiency was different in QTL mapping depending on the type of linked markers. Well-chosen markers in both SMACO and CIM made the range of linkage position for a significant QTL narrow and the estimates of QTL effects accurate. Generally, 3 to 5 cofactors offered accurate results. Over-fitting was a problem with many regressor variables when the heritability was small. Various marker spacing from 4 to 20 cM did not change greatly the detection of multiple QTLs, but they were less efficient when the marker spacing exceeded 30 cM. Likelihood ratio increased with a large heritability, and the threshold heritability for QTL detection was between 0.30 and 0.05.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.1-7
• /
• 2007

Based on the eigenfunction expansion method, the wave-absorbing performance of a square or circular pile breakwater was investigated. Flow separation resulting from sudden contraction and expansion is generated and is the main cause of significant energy loss. Therefore, evaluation of an exact energy loss coefficient is critical to enhancing the reliability of the mathematical model. To obtain the energy loss coefficient, 2-dimensional turbulent flow is analyzed using the FLUENT commercial code, and the energy loss coefficient can be obtained from the pressure difference between upstream and downstream. It was found that energy loss coefficient of circular pile is 20% that of a square pile. To validate the fitting equation for the energy loss coefficient, comparison between the analytical results and the experimental results (Kakuno and Liu, 1993) was made for square and circular piles with good agreement. The array of square piles also provides better wave-absorbing efficiency than the circular piles, and the optimal porosity value is near P=0.1.