• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.310-316
• /
• 2022

In this paper, the difference in modulation transfer function (MTF) results according to the change in the angle of a slant target when measuring a presampled MTF was confirmed, and the difference was reduced by fitting the edge spread function graph obtained to reduce the error by the target's rotation. Due to the feature of the presampled MTF method, the spatial frequency changed due to the sensor's projected intensity being changed by the target's rotation, and it was confirmed that the difference in the MTF value occurred depending on the rotation angle of the target. In this paper, the MTF was calculated after fitting only one column of the acquired image. It was confirmed that the rotation error is smaller compared to the case of the presampled MTF method and this fitting method can be applied to a scene that contains various target angles, such as auto-focusing using the MTF.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.147-154
• /
• 2021

This study focused on the fitting window structure provided by the virtual fitting service web page. We analyzed the current cases and identified the user's needs for the service through usability assessment, survey, and FGI experiments. As a result of the design, the fitting window of the existing web page was opened at the same time as the site was accessed to improve the hassle of using the icons due to their small size and poor visibility. In the case of fitting windows, the problem of information delivery was supplemented so that even the initial user could understand the fitting map of the existing method, and additional items needed for user propensity were provided so that the service could be used accurately and easily. As a result of this study, it can be used as a basic research material in future virtual fitting service studies and is expected to provide good implications to fashion marketers.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.204-207
• /
• 2003

실시간으로 배경에서 분리된 정확한 얼굴 영역을 찾아내는 것은 인식의 가장 기본적인 선행과제이다 얼굴을 찾기 위한 방법 중에 특징기반의 모서리(edge) 정보의 추출과 ellipse fitting 알고리즘을 이용하여 배경으로부터 얼굴을 효과적으로 분리해낸다. 얼굴인식을 하기 위한 얼굴 데이터베이스를 선처리 되어진 배경과 분리된 영상이 검출 된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.413-414
• /
• 2009

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.755-758
• /
• 2004

A hearing aid performs the role of fitting in order to provide those with a hearing problem with a better hearing ability in ordinary circumstances. The existing Fitting system in the hearing aid is consisted somewhat complex, and simply performs the role of Fitting without any supervisions of those with a hearing problem. Such is these methods makes it unable to establish an organized supervision, and shows a problem in making high efficiency. In order to solve this problem mentioned as above, the based thesis have connected the Fitting program and the patient-management database program for the easy use by the user.

• Journal of applied mathematics & informatics
• /
• v.6 no.2
• /
• pp.669-684
• /
• 1999

We are interested in the problem of fitting a curve to a set of points in the plane in such a way that the sum of the squares of the orthogonal distances to given data points ins minimized. In[1] the prob-lem of fitting circles and ellipses was considered and numerically solved with general purpose methods. Especially in [2] H. Spath proposed a special purpose algorithm (Spath's ODF) for parabolas y-b=$c($\chi$-a)^2$ and for rotated ones. In this paper we present another parabola fitting algorithm which is slightly different from Spath's ODF. Our algorithm is mainly based on the steepest descent provedure with the view of en-suring the convergence of the corresponding quadratic function Q(u) to a local minimum. Numerical examples are given.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.768-776
• /
• 2011

This paper considers a data fitting problem for rational function models using the LM (Levenberg-Marquardt) optimization method. Rational function models have various merits on representing a wide range of shapes and modeling complicated structures by polynomials of low degrees in both the numerator and denominator. However, rational functions are nonlinear in the parameter vector, thereby requiring nonlinear optimization methods to solve the fitting problem. In this paper, we propose a data fitting method for rational function models based on the LM algorithm which is renowned as an effective nonlinear optimization technique. Simulations show that the fitting results are robust against the measurement noises and uncertainties. The effectiveness of the proposed method is further demonstrated by the real application to a 3D depth camera calibration problem.

• Transactions of Materials Processing
• /
• v.13 no.4
• /
• pp.359-364
• /
• 2004

In the multi-stage former, a manufacture of hexagonal fitting nut was generated in a defective products about 70∼80% in the industry field. Products generated in defects manufactured to be a machining about 60%. Additional process increased a product cost and decreased a product rate. Therefore, it is important to predict and design a preform reducing defective products in the early stage of process design. So in the study Defects for manufacturing hexagonal fitting nut verified a cause through the finite element simulation. To reduce a defective generation. a preform designed and a designed preform verified through the finite element simulation. In conclusion, a generated defects when a hexagonal fitting nut manufactured should reduce if a round dimension of preform reduced and a part of opposition angle distributed in plenty a volume.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.381-385
• /
• 2006

This research introduces easy tool manufacturing method regarding tool manufacturing procedure. In the conventional method, wire cutting machining and lapping operation of corner and render region were performed after shrink-fitting to ensure the accuracy of gear profile. But lapping operation is very difficult due to corner and render is located deep inside of die. In this research, wire cutting operation was performed after $1^{st}$ ring was shrink-fitted to ease lapping operation and increase the accuracy of corner radius. Before $2^{nd}$ ring fitting, lapping was completed. Elastic deformation amount due to $2^{nd}$ ring fitting and cold forging was calculated through finite element analysis and wire cutting specification was offset in that amount. Comparison of gear dimension between analysis and forged part ensures the validity of new manufacturing methods.