• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 한국광학회지
• /
• 제33권6호
• /
• pp.310-316
• /
• 2022

Presampled 변조전달함수(MTF) 측정에서 slant 표적각도 변화에 따라 MTF 결과의 차이가 있음을 확인하였고, 표적각도 변화에 대한 오차를 줄이기 위하여 획득한 edge spread function 그래프를 fitting하여 측정값의 오차를 줄일 수 있는 측정기법을 연구하였다. Presampled MTF 방법의 특성상 표적이 회전함에 따라 투영되는 공간주파수의 강도분포는 표적의 회전각도에 따라 변화하며, 이로 인하여 MTF 차이가 발생함을 확인하였다. 이 연구에서는 획득한 영상의 1개의 열에 대해서만 fitting을 한 후 MTF를 계산하였다. Fitting을 이용한 계산은 기존의 presampled MTF 방법과 비교하여 표적 회전에 따른 오차가 줄어듬을 확인하였다. 이 방법은 MTF를 이용한 자동 초점 등 다양한 각도의 표적에 응용이 가능할 것으로 기대된다.

• 한국융합학회논문지
• /
• 제12권2호
• /
• pp.147-154
• /
• 2021

이 연구는 가상 피팅 서비스에서 제공하는 피팅창 구조와 인터페이스 디자인에 관한 것으로 현재 시장에서 유통 중인 유관 서비스 사례를 분석하고 FGI를 통해 서비스에 대한 사용자의 니즈를 파악하였다. 연구의 결과로 기존 웹페이지에서 피팅창을 찾을 때 아이콘의 크기가 작고 가시성이 낮은 문제는 사이트 접속과 동시에 피팅창이 열리게 하였고, 피팅맵을 초기 사용자도 잘 이해 할 수 있게 정보 전달 관련 문제를 해소하였다. 또한 사용자 성향에 필요한 항목을 제공하여 정확하고 쉽게 서비스를 사용할 수 있도록 디자인 하였다. 본 연구의 결과는 이어지는 가상 피팅 서비스 연구의 기초 자료로 활용되고 관련 산업에 종사하는 마케터에게 좋은 시사점을 제공할 것으로 기대한다.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 추계학술발표대회(상)
• /
• pp.204-207
• /
• 2003

실시간으로 배경에서 분리된 정확한 얼굴 영역을 찾아내는 것은 인식의 가장 기본적인 선행과제이다 얼굴을 찾기 위한 방법 중에 특징기반의 모서리(edge) 정보의 추출과 ellipse fitting 알고리즘을 이용하여 배경으로부터 얼굴을 효과적으로 분리해낸다. 얼굴인식을 하기 위한 얼굴 데이터베이스를 선처리 되어진 배경과 분리된 영상이 검출 된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.413-414
• /
• 2009

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.755-758
• /
• 2004

A hearing aid performs the role of fitting in order to provide those with a hearing problem with a better hearing ability in ordinary circumstances. The existing Fitting system in the hearing aid is consisted somewhat complex, and simply performs the role of Fitting without any supervisions of those with a hearing problem. Such is these methods makes it unable to establish an organized supervision, and shows a problem in making high efficiency. In order to solve this problem mentioned as above, the based thesis have connected the Fitting program and the patient-management database program for the easy use by the user.

• Journal of applied mathematics & informatics
• /
• 제6권2호
• /
• pp.669-684
• /
• 1999

We are interested in the problem of fitting a curve to a set of points in the plane in such a way that the sum of the squares of the orthogonal distances to given data points ins minimized. In[1] the prob-lem of fitting circles and ellipses was considered and numerically solved with general purpose methods. Especially in [2] H. Spath proposed a special purpose algorithm (Spath's ODF) for parabolas y-b=$c($\chi$-a)^2$ and for rotated ones. In this paper we present another parabola fitting algorithm which is slightly different from Spath's ODF. Our algorithm is mainly based on the steepest descent provedure with the view of en-suring the convergence of the corresponding quadratic function Q(u) to a local minimum. Numerical examples are given.

• 제어로봇시스템학회논문지
• /
• 제17권8호
• /
• pp.768-776
• /
• 2011

This paper considers a data fitting problem for rational function models using the LM (Levenberg-Marquardt) optimization method. Rational function models have various merits on representing a wide range of shapes and modeling complicated structures by polynomials of low degrees in both the numerator and denominator. However, rational functions are nonlinear in the parameter vector, thereby requiring nonlinear optimization methods to solve the fitting problem. In this paper, we propose a data fitting method for rational function models based on the LM algorithm which is renowned as an effective nonlinear optimization technique. Simulations show that the fitting results are robust against the measurement noises and uncertainties. The effectiveness of the proposed method is further demonstrated by the real application to a 3D depth camera calibration problem.

• 소성∙가공
• /
• 제13권4호
• /
• pp.359-364
• /
• 2004

In the multi-stage former, a manufacture of hexagonal fitting nut was generated in a defective products about 70∼80% in the industry field. Products generated in defects manufactured to be a machining about 60%. Additional process increased a product cost and decreased a product rate. Therefore, it is important to predict and design a preform reducing defective products in the early stage of process design. So in the study Defects for manufacturing hexagonal fitting nut verified a cause through the finite element simulation. To reduce a defective generation. a preform designed and a designed preform verified through the finite element simulation. In conclusion, a generated defects when a hexagonal fitting nut manufactured should reduce if a round dimension of preform reduced and a part of opposition angle distributed in plenty a volume.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.381-385
• /
• 2006

This research introduces easy tool manufacturing method regarding tool manufacturing procedure. In the conventional method, wire cutting machining and lapping operation of corner and render region were performed after shrink-fitting to ensure the accuracy of gear profile. But lapping operation is very difficult due to corner and render is located deep inside of die. In this research, wire cutting operation was performed after $1^{st}$ ring was shrink-fitted to ease lapping operation and increase the accuracy of corner radius. Before $2^{nd}$ ring fitting, lapping was completed. Elastic deformation amount due to $2^{nd}$ ring fitting and cold forging was calculated through finite element analysis and wire cutting specification was offset in that amount. Comparison of gear dimension between analysis and forged part ensures the validity of new manufacturing methods.