• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.837-846
• /
• 2004

This paper presents a screening technique for greatly reducing the computation involved in determining the optimal location and types of Flexible AC Transmission System (FACTS) devices in a large power system. The first-order sensitivities of the generation cost for various FACTS devices are derived. This technique requires solving only one optimal power flow (OPF) to obtain sensitivities with respect to FACTS device control variables for every transmission line To implement a sensitivity-based screening technique, we used a new UPFC model, which consists of an ideal transformer with a complex turns ratio and a variable shunt admittance. A S-bus system based on the IEEE 14-bus system was used to illustrate the technique.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1376-1378
• /
• 2006

Numerical and experimental study were carried out to characterize sound fields of low frequency in a scaled reverberation chamber for measurement of sound insulation of panels. By using BEM, lower modes of the chamber are identified and then predicted the effect of diffusers in order to destruct lower modes. Compared results with measurements show reasonable agreements, especially at the first end second modes. Based on numerical prediction, the diffuser are installed in order to improve sound fields to be more diffuse than ever. It is found that the diffuser put in nodal line of the chamber destruct evidently the first mode. Consequently, the measuring error at the low frequency can be relatively reduced compare to the case of without diffuser.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.2
• /
• pp.108-115
• /
• 2002

The excitation forces from the periodical firing pressure in cylinder and the rotating crank mechanism cause lots of vibration problems in diesel engines. In this Paper. the computational program for predicting the excitation force is developed and applied to 4-stroke In-line engines. The crank angle is also optimized to reduce the first and second order moment produced by engines. Compared to the conventional uniform crank angle, about 70 % of the first order horizontal and vertical moment can be reduced by re-designing the crank angle non-uniformly.

• Journal of Global Scholars of Marketing Science
• /
• v.13
• /
• pp.159-181
• /
• 2004

The purposes of this study are following. First, we want to review the relationship between trust and precedent variables including shared value, communication and opportunistic behavior in the on-line and off-line channel. Second, building the relationship among variables from previous research, we develop the research model. Third, based on the empirical analysis, we want to build the relationship among variables. Fourth, based on results of analysis, we want to elicit implications for marketing management from the trust in on-line channel in order to enhance the relationship commitment and customer loyalty. Theoretical implications of this study are following. First, under the multiple channel retailing environment, trust in on-line channel is influenced by the trust in off-line channel that the company is operating. Previous researches couldn't found this result because these researches divided on-line and off-line channel separatedly, Second, under the multiple channel retailing environment, on-line or off-line relational attributes including shared value, opportunistic behavior and communication have a effect on trust or relationship commitment So, shared value, opportunistic behavior and communication are very important variables having a effect on trust and relationship commitment in not only off-line channel but also on-line channel. Third, trust and relationship commitment were important mediate variables in multiple channel environment. This result goes with previous researches in single channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.813-823
• /
• 1998

This paper analyzed the circularly polarized conformal microstrip patch antennal using the unsplit anisotropic perfectly matched layer(UAPML) method. Also, this paper are treated effectively the edge and corner parts on the 3 dimensional UAPML. Especially, to analyze microstrip patch antennas with the coaxial feeder line, it was applied to mixed the UAPML with Mur's first order absorbing boundary condition. Therefore this paper suggest the new the method to mix the UAPML with Mur's first order absorbing boundary condition. The results show the time responses of electromagnetics $E_z$ and $H\chi'$, input impedances of coaxial cable and radiation patterns of strip parchs on the single and the array patchs with central frequencies 1.575 GHz, 1.778 GHz and 4.8 GHz in L-band and C-band for mobile communication. The results of this paper shows that its results was compared the Mur's first order abc and mixed the second order dispersion boundary condition(SDBC) with the Mur's first order absorbing boundary condition. In accordance with, the validity of the method is confirmed.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.317-329
• /
• 2014

In vision measurement systems based on structured light, the key point of detection precision is to determine accurately the central position of the projected laser line in the image. The purpose of this research is to extract laser line centers based on a decision function generated to distinguish the real centers from candidate points with a high recognition rate. First, preprocessing of an image adopting a difference image method is conducted to realize image segmentation of the laser line. Second, the feature points in an integral pixel level are selected as the initiating light line centers by the eigenvalues of the Hessian matrix. Third, according to the light intensity distribution of a laser line obeying a Gaussian distribution in transverse section and a constant distribution in longitudinal section, a normalized model of Hessian matrix eigenvalues for the candidate centers of the laser line is presented to balance reasonably the two eigenvalues that indicate the variation tendencies of the second-order partial derivatives of the Gaussian function and constant function, respectively. The proposed model integrates a Gaussian recognition function and a sinusoidal recognition function. The Gaussian recognition function estimates the characteristic that one eigenvalue approaches zero, and enhances the sensitivity of the decision function to that characteristic, which corresponds to the longitudinal direction of the laser line. The sinusoidal recognition function evaluates the feature that the other eigenvalue is negative with a large absolute value, making the decision function more sensitive to that feature, which is related to the transverse direction of the laser line. In the proposed model the decision function is weighted for higher values to the real centers synthetically, considering the properties in the longitudinal and transverse directions of the laser line. Moreover, this method provides a decision value from 0 to 1 for arbitrary candidate centers, which yields a normalized measure for different laser lines in different images. The normalized results of pixels close to 1 are determined to be the real centers by progressive scanning of the image columns. Finally, the zero point of a second-order Taylor expansion in the eigenvector's direction is employed to refine further the extraction results of the central points at the subpixel level. The experimental results show that the method based on this normalization model accurately extracts the coordinates of laser line centers and obtains a higher recognition rate in two group experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.783-789
• /
• 2001

The purpose of this study is to build and to manage environment models with line segments from the sonar range data on obstacles in unknown and varied environments. The proposed method subsequently employs a two-stage data-transform process in order to extract environmental line segments from the range data on obstacles. In the first stage, the occupancy grid extracted from the range data is accumulated to a two-dimensional local histogram grid. In the second stage, a line histogram extracted from an local histogram gird is based on a Hough transform, and matching is a process of comparing each of the segments in the global line segments map against the line segments to detect similarity in overlap, orientation, and arrangement. Each of these tests is made by comparing one of the parameters in the segment representation. After the tests, new line segments are composed to the global line segments map. The proposed technique is illustrated by experiments in an indoor environment.

• Journal of Ship and Ocean Technology
• /
• v.6 no.4
• /
• pp.1-12
• /
• 2002

A control system for an automated line heating process is developed by use of object-oriented methodology. The main function of the control system is to provide real-time heating information to technicians or automated machines. The information includes heating location, torch speed, heating order, and others. The system development is achieved by following the five steps in the object-oriented procedure. First, requirements are specified and corresponding objects are determined. Then, the analysis, design, and implementation of the proposed system are sequentially carried out. The system consists of six subsystems, or modules. These are (1) the inference module with an artificial neural network algorithm, (2) the analysis module with the Finite Element Method and kinematics analysis, (3) the data access module to store and retrieve the forming information, (4) the communication module, (5) the display module, and (6) the measurement module. The system is useful, irrespective of the heating sources, i.e. flame/gas, laser, or high frequency induction heating. A newly developed automated line heating machine is connected to the proposed system. Experiments and discussions follow.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.563-567
• /
• 2016

In this paper, the chaos-based secure scheme for power line communication is proposed for the first time. A digitalized chaotic generator based Lorenz system is utilized for generating nonlinear dynamic chaotic signal for masking the information signal instead of reported analog chaotic generators. A simple method of encryption and decryption is also given. In order to confirm the feasibility of the proposed scheme, the system is simulated using a simplified encryption/decryption method in Proteus. The gained results from simulation demonstrated that by using the chaos-based security method, the data can be encrypted and easily transmitted through the power line network efficiently.