• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.80-84
• /
• 2000

A mesh superposition technique is presented for an efficient analysis of structural behavior. Refined child mesh is superimposed over parent elements for the region of interest. It is a kind of adaptive mesh refinement, which allows locally refined mesh without introducing transition region or multipoint constraints. Proper boundary condition is necessary to avoid redundant rigid body motion and kinematic compatibility between neighbor elements. Delamination buckling analysis is conducted to demonstrate accuracy and efficiency of the present method.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.97-105
• /
• 2000

This paper presents an automatic mesh generation considering water depth, which is based on the depth interpolation. The key feature of this method is that the position of a mesh on any depth in the shallow water area can be generated. The Examples are carried out, and the results are shown to be good. This method is shown to be a useful and powerful tool for the flow calculation for the seabed topography.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.329-336
• /
• 2000

A method for automatic extraction of 2-dimensional finite element connectivities by searching the shortest closed path from a certain node to the starting node was developed. Only the best path among the possible paths was probed. The uniqueness and validity of the extracted path were examined. The proposed method was proved to be complete. Examples show that the proposed method can extract elements exactly from the irregular mesh which can not be handled easily by the conventional automatic mesh generation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.2995-3006
• /
• 1993

An automatic mesh generation scheme has been developed for finite element analysis with two-dimensional, quadrilateral elements. The basic strategies of the method are to transform the analysis domain into loops with key nodes and the loops are recursively subdivided into subloops with the use of best split lines. Finally by using the basic loop operators, the meshes are completed. In this algorithm an eight-node loop operator is proposed, which is useful in the area where the change of element size is large and the splitting criteria for subdividing the loops have also been modified to the existing algorithms. Lines, arcs, and cubic spline curves are used to define the boundaries of analysis domain. Sample meshes for several geometries are presented to demonstrate the robustness of the algorithm.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.780-785
• /
• 2007

Accurate and fast haptic simulations of deformable objects are desired in many applications such as medical virtual reality. In haptic interactions with a coarse model, the number of nodes near the haptic interaction region is too few to generate detailed deformation. Thus, local refinement techniques need to be developed. Many approaches have employed purely geometric subdivision schemes, but they are not proper in describing the deformation behavior of deformable objects. This paper presents a continuum mechanics-based finite element adaptive method to perform haptic interaction with a deformable object. This method superimposes a local fine mesh upon a global coarse model, which consists of the entire deformable object. The local mesh and the global mesh are coupled by the s-version finite element method (s-FEM), which is generally used to enhance accurate solutions near the target points even more. The s-FEM can demonstrate a reliable deformation to users in real-time.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.3
• /
• pp.157-163
• /
• 2006

Surfaces of many engineering structures, especially, those of ships are commonly made out of either single- or double-curved surfaces to meet functional requirements. The first step in the fabrication process of a three-dimensional design surface is unfolding or flattening the surface, otherwise known as planar development, so that manufacturers can determine the initial flat plate which is required to form the design shape. In this paper, an algorithm for optimal approximated development of a general curved surface, including both single- and double-curved surfaces, is established by minimizing the strain energy of deformation from its planar development to the design surface. The unfolding process is formulated into a constrained nonlinear programming problem, based on the deformation theory and finite element. Constraints are subjected to the characteristics of the fabrication method. And the design surface, or the curved shell plate is subdivided by automatic mesh generation.

• Journal of Mechanical Science and Technology
• /
• v.14 no.2
• /
• pp.177-187
• /
• 2000

Dilution is an important factor which influences the properties of clad layer. In this paper the change of dilution during laser cladding and the control of dilution are simulated by a finite element method. The adaptive mesh method is adopted for the time-dependent finite element method computation so that the shape of melt pool can be well represented. The situation of the width control of melt pool is also simulated, which indicates that the dilution can be controlled if the width of melt pool is controlled. Computational results indicate that if a line energy (input energy per unit distance) remains constant the dilution will increase with time, especially at the beginning. Simulation results show that it is possible to control dilution in a certain range if the line energy decreases with time. Experiment of Nd: YAG laser cladding with wire feeding is performed. Experiment results coincide well with the FEM results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.373-380
• /
• 2006

Accurate and fast haptic simulations of deformable objects are desired in many applications such as medical virtual reality. In haptic interactions with a coarse model, the number of nodes near the haptic interaction region is too few to generate detailed deformation. Thus, local refinement techniques need to be developed. Many approaches have employed purely geometric subdivision schemes, but they are not proper in describing the deformation behavior of deformable objects. This paper presents a continuum mechanics-based finite element adaptive method to perform haptic interaction 'with a deformable object. This method superimposes a local fine mesh upon a global coarse model, which consists of the entire deformable object. The local mesh and the global mesh are coupled by the s-version finite element method (s-FEM), which is generally used to enhance accurate solutions near the target points even more. The s-FEM can demonstrate a reliable deformation to users in real-time.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.1
• /
• pp.215-222
• /
• 1997

This paper deals with the problem of generating a uniform tetrahedral mesh which fills a 3-D space with the tetrahedra which are close to the equilateral tetrahedra as possible. This problem is particularly interesting in finite element modeling where a fat triangulation minimizes the error of an analysis. Fat triangulation is defined as a scheme for generating an equilateral triangulation as possible in a given dimension. In finite element modeling, there are many algorithms for generating a mesh in 2-D and 3-D. One of the difficulties in generating a mesh in 3-D is that a 3-D object can not be filled with uniform equilateral tetrahedra only regardless of the shape of the boundary. Fat triangulation in 3-D has been proved to be the one which fills a 3-D space with the tetrahedra which are close to the equilateral as possible. Topological and geometrical properties of the fat triangulation and its application to meshing algorithm are investigated.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.112-119
• /
• 2002

In this paper, an Extended Finite Element Method is proposed by adding discontinuity and singularity enrichment functions to the standard FEM approximation. In this method, the singularity and the discontinuity of the crack are efficiently modeled by using initial regular mesh without refining mesh near the crack tip, so that it enables express the asymptotic stress field near crack tip and crack surface successfully. The developed method was verified by evaluating crack tip stress profile and stress intensity factor of mode Ⅰ/mode Ⅱ fracture problems and the results showed the effectiveness and robustness for fracture problem.