• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1038-1043
• /
• 2003

There are many industrial applications including thin-body structures such as fins. For the numerical modeling of radiation of sound from thin bodies, the conventional boundary element method (BEM) using the Helmholtz integral equation fails to yield a reliable solution. Therefore, many researchers have tried to solve the thin-body acoustic problems. In the area of the design sensitivity analysis (DSA) and optimization methods, however, there has been just a few study reported. Especially fur the thin-body acoustics, however, no further study in the DSA and optimization fields has been reported. In this research, the normal derivative integral equation is adopted as an analysis formulation in the thin-body acoustics, and then used for the sizing DSA and optimization. Since the gradient-based method is used for the optimization, it is important to have accurate gradients (design sensitivities) of the objective function and constraints with respect to the design variables. The DSA formulations are derived through chain-ruled derivatives using the finite element method (FEM) and BEM by using the direct differentiation and continuum variation concepts. The proposed approaches are implemented and validated using a numerical example.

• Computers and Concrete
• /
• 제7권4호
• /
• pp.347-364
• /
• 2010

Since its invention in the $19^{th}$ century, Reinforced Concrete (RC) has been widely used in the construction of a lot of different structures, as buildings, bridges, nuclear central plants, or even ships. The details of the mechanical response for this kind of structures depends directly upon the material behavior of each component: concrete and steel, as well as their interaction through the bond-slip, which makes a rigorous engineering analysis of RC structures quite complicated. Consequently, the practical calculation of RC structures is done by adopting a lot of simplifications and hypotheses validated in the elastic range. Nevertheless, as soon as any RC structural element is working in the inelastic range, it is possible to obtain the numerical prediction of its realistic behavior only through the use of non linear analysis. The aim of this work is to develop a new kind of Finite Element: the "Enhanced Solid Element (ESE)" which takes into account the complex composition of reinforced concrete, being able to handle each dissipative material behavior and their different deformations, and on the other hand, conserving a simplified shape for engineering applications. Based on the recent XFEM developments, we introduce the concept of nodal enrichment to represent kinematics of steel rebars as well as bonding. This enrichment allows to reproduce the strain incompatibility between concrete and steel that occurs because of the bond degradation and slip. This formulation was tested with a couple of simple examples and compared to the results obtained from other standard formulations.

• 한국전산구조공학회논문집
• /
• 제19권3호
• /
• pp.271-282
• /
• 2006

지반위에 놓인 콘크리트 슬래브가 온도하중을 받을 때 지반의 전단저항과 슬래브 하부와 지반과의 마찰 등에 의해 생기는 슬래브 하부의 수평저항을 고려하여 지반위에 놓인 콘크리트 슬래브의 거동을 분석하였다. 지반위의 콘크리트 슬래브와 강성도로포장의 해석에 널리 사용되는 탄성지반위의 얇은 판을 이용하여 슬래브 하부의 수평저항을 고려하기 위한 해석 공식을 유도하였다. 이를 이용하여 판요소와 쉘요소를 이용한 유한요소법에 의한 모델을 개발하여 수치해석 결과를 도출하였다. 해석 공식과 수치해석 모델을 이용한 해석 결과를 비교 분석하였고 매우 비슷한 결과가 도출 되는 것을 알 수 있었다. 슬래브의 상부와 하부에 온도 차이가 있을 때와 슬래브의 온도가 전체적으로 감소할 때, 콘크리트 슬래브의 응력 분포에 슬래브 하부의 수평저항이 미치는 민감성을 여러 가지의 다른 슬래브의 두께, 탄성계수, 그리고 지반의 수직탄성계수 등을 고려하여 분석하였다. 해석 결과에서 온도하중을 받을 때 슬래브 하부의 수평저항은 슬래브의 응력에 매우 큰 영향을 미칠 수 있다는 것을 발견하였다.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1287-1292
• /
• 2010

본 연구에서는 균열선단 주위의 응력장을 균열선단으로부터 떨어진 일직선상에서 유한요소법에 의해 계산된 광탄성 등색프린지 차수와 급수형 등각사상 맵핑함수를 이용하여 해석하였다. 해석된 광탄성 응력장을 실제의 광탄성프린지와 비교하였다. 정성적인 비교가 용이하도록 디지털 영상처리에 의해 등색프린지 패턴을 2 배로 증식시키고, 증식된 프린지를 다시 세선처리하여 서로 비교하였다. 유한요소법으로 계산된 프린지 차수를 이용한 하이브리드 응력장 해석에 의해 계산된 프린지와 광탄성 실험에 의한 실제의 프린지를 정성적이고 정량적인 비교를 하였다. 입력된 변위와 계산된 변위의 퍼센트 오차는 18 개의 데이터 모두 6.0% 이하로 서로 일치하였다. 또한 하이브리드 기법에 의한 정규화시킨 응력확대계수 $K_I$ 및 $K_{II}$는 유한요소법과 경험식으로 계산된 값에 근접하였다.

• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.271-278
• /
• 2022

Buckling is one of the most critical phoneme in the design of steel structures. Lateral torsional buckling (LTB) is particularly significant for slender beams generally subjected to loading in plane. The web distortion effects on LTB are not addressed explicitly in standards for flexural design of steel I-section members. Hence, the present study is focused to predict the influence of the web distortion on the elastic (L_r) limiting lengths given in American Institute of Steel Construction (AISC) code for the lateral torsional buckling (LTB) behavior of steel beams due to no provision in the code for consideration of web distortion. For this aim, the W44x335 beam is adopted in the buckling analysis carried out by the ABAQUS finite element (FE) program since it is one of the most critical sections in terms of lateral torsional buckling (LTB). The strain results at mid-height of the web at mid-span of the beam are taken into account as the monitoring parameters. The web strain results are found to be relatively greater than the yield strain value when L/L_r is equal to 1.0. In other words, the ratio of L/L_r is estimated from the numerical analysis to be about 1.5 when the beam reaches its first yielding at mid-span of the beam at mid-height of the section. Due to the effect of web distortion, the elastic limiting length (L_r) from the numerical analysis is obtained to be considered as greater than the calculated length from the code formulation. It is suggested that the formulations of the limiting length proposed in the code can be corrected considering the influence of the web distortion. This correction can be a modification factor or a shape factor that reduces sectional slenderness for the LTB formulation in the code.

• 대한토목학회논문집
• /
• 제10권3호
• /
• pp.29-38
• /
• 1990

본(本) 연구(硏究)에서는 종래(從來)의 일반적(一般的)인 비선형(非線型) 해석(解析) 방법(方法)인 Lagrangian방법(方法)을 개선(改善)한 새로운 Pseudo Lagrangian방법(方法)에 의한 기하학적(幾何學的) 선형(非線型) 보요소(要素)의 정식화(Formulation) 과정을 제시(提示)하고 예제해석(例題解析)을 통한 대변형(大變形) 해석결과(解析結果)를 고찰(考察)하여 Pseudo Lagrangian방법(方法)에 의한 보요소(要素)의 대변형(大變形) 해석(解析)의 타당성(妥當性)과 정확도(正確度)를 검증(檢證)하였다. Pseudo Lagrangian방법(方法)에서는 변형전(變形前) 또는 변형후(變形後)의 상태(狀態)를 기준(基準)로 변형(變形)을 나타내는 Total Lagrangian방법(方法)과는 달리 어떠한 물리적(物理的)인 의미(意味)가 없는 임의(任意)의 Pseudo(가상(假想))변형상태(變形狀態)를 기준(基準)으로 변형(變形)을 나타낸다. 유한요소법(有限要素法)에 의한 비선형(非線形) 해석시(解析時) 일반적(一般的)인 Lagrangian방법(方法)은 각(各) 구조요소(構造要素)에 대한 유한요소(有限要素) Mapping과 변형(變形) Mapping을 따로 수행(遂行)하여야 하는데 비하여 Pseudo Lagrangian방법(方法)에서는 한번의 직접적(直接的) Mapping으로 구조요소(構造要素)의 변형상태(變形狀態)를 나타낸다. 예제분석(例題分析) 결과(結果)는 이 PLF방법(方法)에 의한 비선형(非線型) 정식화가 종래(從來)의 Lagrangian방법(方法)보다 적용성(適用性)이 양호(良好)하며 유도과정(誘導過程)이 간편(簡便)함을 보여주고 있으며 PLF방법(方法)에 의한 보요소(要素)의 비선형(非線型) 해석(解析)이 매우 정확(正確)한 결과(結果)를 나타내고 있음을 입증(立證)하고

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.534-539
• /
• 2005

Nodal displacements are referred to the initial configuration in the total Lagrangian formulation and to the last converged configuration in the updated Lagrangian furmulation. This research proposes a relative nodal displacement method to represent the position and orientation for a node in truss structures. Since the proposed method measures the relative nodal displacements relative to its adjacent nodal reference frame, they are still small for a truss structure undergoing large deformations for the small size elements. As a consequence, element formulations developed under the small deformation assumption are still valid for structures undergoing large deformations, which significantly simplifies the equations of equilibrium. A structural system is represented by a graph to systematically develop the governing equations of equilibrium for general systems. A node and an element are represented by a node and an edge in graph representation, respectively. Closed loops are opened to form a spanning tree by cutting edges. Two computational sequences are defined in the graph representation. One is the forward path sequence that is used to recover the Cartesian nodal displacements from relative nodal displacement sand traverses a graph from the base node towards the terminal nodes. The other is the backward path sequence that is used to recover the nodal forces in the relative coordinate system from the known nodal forces in the absolute coordinate system and traverses from the terminal nodes towards the base node. One open loop and one closed loop structure undergoing large deformations are analyzed to demonstrate the efficiency and validity of the proposed method.

• 한국지진공학회논문집
• /
• 제2권2호
• /
• pp.95-104
• /
• 1998

수중 케이블의 동적 거동은 비선형 거동을 보이게 되는데 특히 기하하적 비선형성에 크게 영향을 받는다. 또한, 유체의 흐름으로 인하여 동적 거동의 해석은 더욱 복잡하고 어려워지기 때문에 해석적인 접근 방법에는 한계가 있다. 본 연구에서는 탄성 현수선 케이블요소에 동수력을 고려할 수 있게 하였다. 즉, 동수력을 받는 3차원 탄성 현수선 케이블를 정식화하고, 정적 및 동적 해석을 수행할 수 있는 유한요소 방법을 제시하였다. 동수력은 수정된 Morison 방정식을 이용하여 산정하였다. 제시된 방법으로 구한 수중케이블에 관한 동적 거동을 파악하려 하였으며, 정박 또는 예인에 사용하는 수중케이블의 경우 조류의 방향 및 케이블의 경사각에 따른 동적거동의 변화를 알아볼 수 있다.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.872-881
• /
• 1996

The concept of homology design has been devised for the application to large telescope structure by S.v.Hoerner. It is defined that the deformation of a structure shall be called homologous, if a given geometrical relation holds, for a given number of structural points, before, during, and after the deformation. Recently, the need of homology design in the structural design has been increase due to the required precision in the structure. Some researchers have utilized the theory on the structural design with finite element method in the late 1980s In the present investigation, a simple method using geometrical equality constraints is suggested to gain homologous deformation. The previous method is improved in that the decomposition of FEM eqation, which is very expensive, is not necessary. The basic formulations of the homology design with the optimization concept are described and several practical examples are solved to verify the usefulness and validity. Especially, a back-up structure of a satellite antenna is designed by the suggested method. The results are compared with those of existing researches.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.249-264
• /
• 2017

In this paper free linear vibration of lattice composite conical shells will be investigated. Lattice composite conical shell consists of composite helical ribs and thin outer skin. A smeared method is employed to obtain the variable coefficients of stiffness of conical shell. The ribs are modeled as a beam and in addition to the axial loads, endure shear loads and bending moments. Therefore, theoretical formulations are based on first-order shear deformation theory of shell. For verification of the obtained results, comparison is made with those available in open literature. Also, using FEM software the 3D finite element model of composite lattice conical shell is built and analyzed. Comparing results of analytical and numerical analyses show a good agreement between them. Some special cases as variation of geometric parameters of lattice part, effect of the boundary conditions and influence of the circumferential wave numbers on the natural frequencies of the conical shell are studied. It is concluded, when mass and the geometrical ratio of the composite lattice conical shell do not change, increment the semi vertex angle of cone leads to increase the natural frequencies. Moreover for shell thicknesses greater than a specific value, the presence of the lattice structure has not significant effect on the natural frequencies. The obtained results have novelty and can be used for further and future researches.