• Title/Summary/Keyword: finishing shrinkage

Search Result 104, Processing Time 0.029 seconds

The Mechanical Properties of Fluffy Spun-like Yarn by ATY Textured (1) (ATY 사가공에 의한 Fluffy Spun-like Yarn의 물성 (1))

  • Park, Myung Soo
    • Textile Coloration and Finishing
    • /
    • v.25 no.3
    • /
    • pp.223-231
    • /
    • 2013
  • This research has a main focus on providing fundamental data for on-the-spot industrial fields by comparing and contrasting physical properties of fluffy spun-like material. The fluffy spun-like yarn is developed as fluffy yarn similar to natural spun-like yarn by treating polyester(FDY and + type shaped DTY) with ATY machine. In this experiment, using ATY machine for raw material texturing, we produced two fluffy yarns: (i) + type shaped(50d/36f, DTY) as core yarn and 100d/192f FDY as effect yarn[ATY(D)], (ii) FDY(75/36) as core yarn and 100d/192f FDY [ATY(F)] as effect yarn. After producing thous yarns, we twisted them with 500T/M, 700T/M, 1000T/M, respectively. produced yarns through this process were used as the samples for this experiment. Even though the shrinkage of fluffy yarn ATY(F) and ATY(D) becomes high as treated temperature rises and treated time lengthens, it is more affected by treated temperature then by treated time. In this experiment, produced fluffy yarn[ATY(D)] shows a little high values for temperature, but almost same values for higher temperatures. When we compare ATY(F) with ATY(D) fluffy yarn shows more natural fluffy yarn surface structure like natural cotton. The shrinkage of 700T/M twisted ATY(D) fluffy yarn show about 11% under treated temperature $180^{\circ}C$ and treated time 30min, and about 7% under $120^{\circ}C$ and 30min, respectively. But the shrinkage of 1000T/M fluffy yarn shoes about 9% and 6% under same conditions. Regarding treated time, tenacity and initial modulus of ATY(D) fluffy yarn rise high until 30min, but do not show much increase above 30min. Regarding treated temperature, tenacity and initial modulus of it rise high aboyer $140^{\circ}C$.

A Study on the Vulcanization System and Two-Step Foaming Properties for Natural Rubber Foam (천연고무의 가황시스템 및 성형공정에 따른 2단 발포 특성 연구)

  • Sunhee Lee;Ye-Eun Park;Dikshita Chowdhury
    • Textile Coloration and Finishing
    • /
    • v.35 no.4
    • /
    • pp.246-255
    • /
    • 2023
  • In this study, we investigated for natural rubber foam to replace petrochemical-based neoprene foam. Experiments were conducted on vulcanization system and 2-step foaming process of natural rubber. The vulcanization system were EV(Efficient Vulcanization Cure), Semi-EV(Semi-Efficient Vulcanization Cure) and CV(Conventional Vulcanization Cure). In the 2-step foaming process, first molding temperature was 140℃, times were 15, 20, 25, and 30minutes, and the second molding temperature was 160℃, the times 5, 10, 15, and 20minutes. The cure and viscosity characterization were evaluated by oscillating disc rheometer (ODR) and mooney viscosmeter. Various mechanical characteristics, including hardness, tensile strength, elongation at the point of rupture, and tear strength, were quantified. Subsequently, an assessment of alterations in these mechanical attributes was conducted post-immersion in a NaCl solution. In addition degree of volume change was measured after immersing the NR foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. And expansion ratio and shrinkage ratio of NR foam were evaluated for 28 days. As a result the EV vulcanization system showed the least change in physical properties before and after salt water immersion, and the lowest shrinkage ratio for 28 days. In addition it was confirmed that the 2-step foaming optimum condition differed depending on the appropriate vulcanization condition.

Fabric Weave Structural Design of the Woven Fabrics (직물의 설계 디자인)

  • Kim, Seung-Jin
    • Science of Emotion and Sensibility
    • /
    • v.13 no.1
    • /
    • pp.279-284
    • /
    • 2010
  • This paper surveys basic research for data base system of the fabric structural design. For this purpose, the weave density coefficients of the worsted and cotton fabrics are analysed and discussed with cover factors suggested by Prof. Walz and Picanol company. And the relationship between weave density coefficients and cover factors of the worsted and cotton woven fabrics was analysed and discussed with weave pattern and yarn count. Finally, the process shrinkages of dyeing and finishing processes according to the weave density coefficients of the worsted and cotton fabrics were analysed and discussed as a preliminary study for the data base system of the fabric structural design. As a result, the density coefficients, K values of the worsted and cotton fabrics were ranged from 600 to 1000, and the weave density coefficients of those fabrics are ranged from 0.4 to 0.8 and from 0.2 to 1.0, respectively. The finishing shrinkages for the worsted fabrics are ranged from 2% to 10%, and for cotton fabrics, it was from 2% to 20%. The weave density coefficients of the worsted and cotton fabrics could be distributed according to the looms, weave pattern and weaving and finishing shrinkages as a concept of the data base for the fabric structural design.

  • PDF

Feasibility Study of Modified Durometer to Evaluate Setting Time of the Concrete (콘크리트의 응결시간 판정시 개량형 듀로미터의 사용 가능성 분석)

  • Han, Cheon-Goo;Han, Min-Cheol;Shin, Yong-Sub
    • Journal of the Korea Institute of Building Construction
    • /
    • v.20 no.5
    • /
    • pp.433-440
    • /
    • 2020
  • In this study, a new type of Durometer was invented by modifying the currently used Durometer with the hemisphere shaped needle to columnar shaped needle. The aim of the study is, hence, to provide the feasibility of the advanced Durometer for assessing setting time of the concrete. Generally, the finishing of concrete surface should be conducted to secure the smooth surface, improve the permeability, and prevent the plastic shrinkage cracking. Although this surface finishing work should be conducted during the plastic phase between initial and final setting, currently in practical situations, the timing of starting the finishing work was determined by the sense of the worker. To improve this situation, Kato Junji suggested to use the hemisphere and needle shaped Durometers to determine the initial and final setting time, respectively. However, in this case, there are difficulties of using two different Durometers and of occurring failure of the Durometer due to the intruded cement paste. To prove the feasibility of new typed Durometer, setting time and surface hardness were evaluated by applying for the concrete with various replacing ratios of fly-ash and coal gasification slag as an aggregate.

Studies on Methacrylate Finish with Silk Fabrics and their Anticrease (Methacrylate 견직물가공과 방추도개선에 대한 연구)

  • 최병희;이양후
    • Journal of Sericultural and Entomological Science
    • /
    • v.28 no.2
    • /
    • pp.65-73
    • /
    • 1986
  • These studies are carried out to improve silk availability for anticrease by useing methacrylate monomer polymerization method with in silk fiber. For this purpose, degree of anticrease, stiffness and shrinkage of various silk fabrics, included finish or not, after repeat of washings and polyster fabric was compared as standard. The adopted samples are ; 1. Polyester, Georgette, Woven density…90cm-85g/m 2. Silk, Twill, Degumed, Light, Woven density…90cm-90g/m 3. Silk, Twill, Degumed, Heavy, Woven density…90cm-200g/m 4. Silk, Stain, Degumed, Light, Woven density…90cm-90g/m The reached results are as followings. 1. The results of improving on anticrease by the finished method were about ten per cent increase against their original samples. 2. The light density silks showed satisfactory improve for anticrease, but the heavy one remained as rather poor condition. 3. The results for degree of textile stiffness were investigated to make sure reserve their textile feeling and observed to be good condition upon the finish work. 4. Textile shrinkage after the repeat of soap wash was investigated on indivisual test sample and silk fabrics showed more shrinkage than polyester which it seemed to be tentering shrinkage druning their general finishing processes. 5. The investigation showed that anticrease, stiffness and shrinkage of the sample textile were more or less deteriorated regardless silk or polyester by the repeat of washings. These matters are considered that such results were obtained because of the fiber fatigue nature. 6. The report reached that silk textiles should be used by dry cleaning methed after finish of any resin finish to reserve their improved anticrease nature.

  • PDF

Studies on Silk Textile Wash and Wear Finishing (絹織物 Wash and Wear 加工硏究)

  • Choe, Byong-Hee;Lee, Yang-Hoo
    • Journal of Sericultural and Entomological Science
    • /
    • v.23 no.1
    • /
    • pp.47-55
    • /
    • 1981
  • Silk textile finishing has been studied for many years by many workers in order to meet more utilities for various endusers. Such studies, however, could not be successful because any natural fibers are hardly change their natures by artificial treating methods. Textile finishing is of course to improve the mechandise qualities and the poor natures of silk so that it may be available as the best textile fiber in the world. Sometimes, famous trade marked textile plays more power than its quality in the silk market, nevertheless, this should be over line of research activities. Meantime, the silk demand has been also transferred from ladies stocking to other clothes since nylon or other synthetic fibers were developed. That is why, the extension of silk demand should be developed by various research works. Specially, silk is known as difficult textile to handle it during washing or ironing process which happened to depress down the silk usage for house wives. In order to solve such problems, the reporter has been worked for many years and now, he believes that he has developed a proper finishing method to coversuch problems. The developed finishing method may be said to eligible with economical aspect and shorten the dry duration after water washing in half against normal silk textile without harming the specific silk nature. As all of us know, silk fiber starts to denature since it was spinned by silkworm and the fiber is formed as overlapped "S" type curves during its concooning process. After it is made as raw silk or sericin silk, it shows as straight line form, but it changes in to waved form in case refining or degumming process in order return to its original spinned form. Such nature is continued during its textile form and ends with hard ironing nature than other textile fibers. Mean while, the silk fiber keeps to continue its denaturing and this is iniciated by repeat of washing and drying which takes many years to reach its final stage, The reporter has found the iniciating denature of silk by his finishing process, with out heat, decreasing the swollen nature which ended with shortening the drying duration after wash. Each washing was carried out by soaking the previously weighed sample in cold water for one hour, then pressed the sample for ten minutes to eliminate its free water component before weighing with same condition. According to this, the treated silk showed much denaturing after the finishing, but the standard silk progressed the denaturing by and by with the repeat of washing and drying, finally reached the same swollen degree of treated silk, Such treating result explains that the treated silk happened to be stebilized nature by the treating immediately. On the other that the treated silk happened to be stebilized nature by the treating immediately. On the other hand, standard silk may reach to such condition by the time of worn out clothes after repeat of washing and drying for many years while the clothes will be no more useful. The decreased swelling nature has brought about the drying period in half against standard silk after all. Not only the tests of tenacity and elongation but also crease resistance recovery, stiffness and shrinkage tests were carried out after each washing and drying which he has found better result on the treated silk textile against the standard silk. The most important thing was to keep the textile feeling of silk by such finishing work before improve any poor nature of silk. The general silk has a nature to absorb smoke or dirt from its surrounding air and reaches to dirty color shade upon such exposure, but the treated one has improved such nature because of its artificial denaturing, another word, it keeps clean longer than the normal silk. Many previous finishing works could improve some specific nature of silk, but it happened to deprave other important natures. The reporters work is, however, specialized to improve the silk to be useful as Wash and Wear Silk without harming its standard natures. So far, this work happened to be a overall innovative finishing method of silk textile.

  • PDF

The Mechanical Properties of New Worsted Wool-like Fabrics Using Latent Yarns (잠재 권축사를 이용한 New Worsted Wool-like 직물의 역학적 특성)

  • Park, Myung-Soo
    • Textile Coloration and Finishing
    • /
    • v.23 no.4
    • /
    • pp.233-240
    • /
    • 2011
  • A fineness range of 150 Nm-170 Nm has recently been applied to produce much finer wool products, so that processing techniques for the wool fabrics have been developed very rapidly. However, the worsted wool-like technique using polyester fiber has not been still implemented in general processing technique. Therefore, this research is to develop materials of side-by-side type with high finess, high shrinkage and stretchability. The mechanical properties of the produced fabrics were analyzed and the fundamental information were obtained for the new worsted wool-like products. The physical properties of a latent crimped yarns of side-by-side type with stretch function are analyzed. Also the mechanical properties of five kinds of fabrics are analyzed, which are produced with non-circular shape(+type) warp yarns of a twist of 1000(T/M) and with two kinds of latent weft yarns of a twist of 1000 T/M and DTY respectively.

Effect of Processing Condition of Texturing M/C on the Physical Properties of Textured Polyester Filament (폴리에스테르 필라멘트의 텍스쳐링 공정조건이 사물성에 미치는 영향)

  • 김승진;안병훈;이민수
    • Textile Coloration and Finishing
    • /
    • v.11 no.6
    • /
    • pp.18-23
    • /
    • 1999
  • PET POY(pre-oriented-yam) were treated by false twister to high bulky. False twister have many processing parameters velocity ratio(VR), belt cross angle$(\theta)$, 1st heater temp. and K(twisting tension/untwisting tension). we analyzed the effect of properties of textured polyester yam on processing condition. Initial modulus, thermal stress, No. of snarl is decreased by 1st heater. In VR=1.97, Dry and wet shrinkage is increased but is decreased by 1st heater in VR=1.564. K/S and cristallinity tend to increase by decreasing VR.

  • PDF

Analysis on the Physical Property of Nylon High Tenacity Coarse Yarn and Fabric for Military and Technical Textiles (군용 및 산자용 나일론 고강력 태섬사 및 후직물의 물성 분석)

  • Kim, Seung-Jin;Kim, Sang-Ryong;Lee, Do-Hyun;Choi, Woo-Hyuk
    • Textile Coloration and Finishing
    • /
    • v.21 no.3
    • /
    • pp.43-48
    • /
    • 2009
  • This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

The Crystal Structure and Mechanical Properties of Thick & Thin yarn According to Production Condition (제조조건에 따른 태세사(Thick & Thin yarn)의 구조와 물성)

  • Park Myung Soo
    • Textile Coloration and Finishing
    • /
    • v.17 no.3 s.82
    • /
    • pp.43-48
    • /
    • 2005
  • 시료는 POY사 104/192로 Draw-Winder(독일, Zinser)를 이용하여 기존의 태세사 제조장치의 부분적인 개조를 통하여 길이방향으로 강제적인 태세사가 형성되도록 하는 제조기술을 이용하여 Thin-thick yam(T&T사) 6종류를 제조하였으며 제조 조건에 따른 구조변화와 물성에 대하여 연구 검토한 결과 다음과 같다. 결정화도의 변화는 Draw-winder의 R2 roller 온도가 상온인 경우보다 $100^{\circ}C$인 경우가 높게 나타났으며 태세사의 세(thin)부분의 복굴절률은 연신비가 높고 Draw winder의 roller(R2)의 온도가 높을수록 복굴절 값은 선형적으로 증가하였다. T&T사 제조시 연신 온도가 상온인 경우는 Thin부분만 연신이 진행되고 Thick 부분은 원사인 POY사의 성질이 그대로 유지하고 있음을 알 수 있고 R2 roller 온도가 상온에서 제조된 시료의 초기탄성률은 약1.5-2.0kgf/denier 정도로 높게 나타났으나 $100^{\circ}C$로 제조된 시료는 약 0.2-0.8kgf/denier 정도로 낮게 나타났다.