• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.271-279
• /
• 2017

This study evaluated antimicrobial efficacy and antioxidant effect of fraction isolated from Coptis Radix and confirmed its possibility as a cosmetic material. The extracts of isolated from Coptis Radix conducted an antimicrobial activity against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Candida albicans by disc diffusion method and measure clear zone. As a result, it was confirmed that antimicrobial activity against S. aureus and candida. A was observed in all samples except Fr 1. The activity of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and The activity of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) cation radical scavenging were determined by antioxidant assay according to the concentrations (50, 125, 250) ${\mu}g/mL$ of extracts of isolated from Coptis Radix. As a result, DPPH radical scavenging activity of Fr 1, 2, 3, 4 at $250{\mu}g/mL$ was 11.4%, 30.3%, 42.0% and 53.1%, respectively and $ABTS^+$ radical scavenging activity was 28.6%, 96.2%, 98.6% and 97.1% at the same concentration, respectively. Fr. 3 and 4 showed higher radical scavenging activity than the positive the control group BHT at the same concentration. In the WST assay results of measuring the cytotoxicity of Coptis Radix, except for Fr. 4, Fr. 1, 2 and 3 did not show toxicity. As a result, the fractions isolated from Coptis Radix can be regarded as a cosmetic material having antimicrobial activity and antioxidant ability.

• Journal of The Korean Association For Science Education
• /
• v.38 no.3
• /
• pp.343-354
• /
• 2018

In this study, the first experience of the whole research process of a novice scientist (student A) who participated in the Undergraduate Research Program (URP) was analyzed. The data were collected through observation, interviews, and document analysis with the cultural historical activity theory being used as a theoretical lens. At the beginning of novice's research, the mentor guided him in setting a research goal and provided mediating artifacts. Student A formed a research team based on the vertical relationship without a shared mental model. Two major contradictions occurred and they were the sources of changes of student A's activity system. The first contradiction was between the mentor's educational philosophy and the mentee's educational needs, which was resolved in a way that student A asked and used the mentor's network to obtain his needs about task-specific details. The second contradiction arose because the team members wanted horizontal relationship while student A wanted to stick to the vertical relationship. After student A accepted the opinions of the team members, they cooperatively changed the division of labor in the activity system. Student A decided to become a scientist and not a physics teacher, even if his major is physics education after finishing his URP research process. His URP experience also created and expanded his network in the academic field, and his negative attitude toward collaboration changed positively. Through the analysis of the structure and changes in the activity system of URP research, implications for instructional method and support system of the apprenticeship can be obtained.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.4
• /
• pp.309-321
• /
• 1992

A study was designed to assess the current status of infant feeding and weaning practice through an retrospective survey on feeding method, a period of weaning and various kinds of weaning food. Analysing a few influential environmental factors while assessing the level of knowledge today's mothers have on infant nutrition. The results are as follows: 1. As random samples for this study, a total of 516 mothers having infants under the age of 3 were surveyed. Among them, 235 were from Seoul and 281 were from Kyongi province (Yongin, Suwon, Bupyong, Poil, Kihung, Ansan(Chungbuk)). 2. Among the infants who fell under the category of normality (Kaup index $15{\sim}18$), the infants from Seoul area amounted to 60.7%, surpassing the percentage of the infants from Kyongi province, 41.9%. The percentage of the infants belong to a group of under nutrition (Kaup index <13) was relatively higher than that of the infants in a group of overnutrition (Kaup index >20). 3. 16.1% of mother surveyed were breast-fed, 54.6% were formula-fed and 29.3% were mixed-fed. The result indicated that the percentage of breast-fed infants of high-educated, working mothers were relatively lower than those of low-educated housewives. 4. Most of the respondents knew the significance or the necessity of supplementary food in terms of weaning. 5. 98.8% of those surveyed responded that the mother's adequate knowledge on weaning was necessary. 70.1% of them replied that they wanted to get various and in-depth information in printed materials such as books or other kinds of publications. They, also showed deep interest in recipe of weaning food. 6. The average period when those surveyed began weaning of their infants was $4.3{\pm}1.8$ months. The tendency of earlier weaning in 3 months was founded among 41.1% of them. About half of the respondents, 52.3%, started weaning of their infants in $4{\sim}6$ months. In overall, 93.4% of them set on weaning in less than 6 months after babies were born. The survey, in addition, revealed an interesting fact that earlier weaning of infants was shown in the group of high-educated mothers. 7. According to the study, finishing period of weaning was $13.3{\pm}5.4$ months on average. Only 38.9% of the respondents ended weaning of their infants in 12 months, the proper period recommended by renowned experts. In general, the infants on formula-feeding finished their weaning later than those on breast-feeding (p<0.05).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.52-59
• /
• 2013

The internal contamination screening method using gross beta measurement was performed for radioisotope workers. 24 h and spot urine samples from workers of medical isotope production facilities were collected and measured. Most of the results were similar with the background level of gross beta activity except for a specific worker. Gross beta activity was slightly increased in several hours after finishing work. And the environmental factor of production facilities causing internal contamination were estimated based on screening results. The additional detailed internal dose assessment must be followed after the screening for protection of workers. Moreover, a procedure was established to apply a simple internal contamination assessment for radiation workers.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.69-78
• /
• 2020

Objective: This study aimed to compare the effects of diets with and without supplements of methionine/lysine (met/lys) and methionine/α-tocopherol (met/α-tocopherol) on the performance, carcass traits and meat quality of Hanwoo steers. Methods: A total of 21 Hanwoo steers were divided into three different groups. Each group consisted of 7 animals that received different dietary treatments for 120 days as follows: a control (C) diet composed of a basal diet with 74% total digestible nutrient and 12% crude protein; treatment 1 (T1) composed of a basal diet enriched with methionine 69%+lysine 31%; and treatment (T2) composed of a basal diet enriched with methionine 84.65%+α-tocopherol 15.35%. Daily supplementation was given using the top-dressing method (20 g/animal). Results: The met/lys groups yielded a longissimus lumborum with increased water holding capacity (p<0.01) and lower shear force value (p<0.05). Dietary met/lys did not have an adverse effect on the animal performance and carcass traits. Instead, these supplements contributed significantly to the higher protein content compared to the control diet (p<0.05). Myristic acid (C14:0) was the only fatty acid affected by the supplementation. While the met/α-tocopherol group led to significantly higher protein and oxymyoglobin contents during storage (p<0.05). It also contributed significantly to the lower shear force value and 2-thiobarbituric acid reactive substances score during storage (p<0.05) compared to the control and treatment 1 since the initial storage day. The met/α-tocopherol diet also yielded meat with a redder color (p<0.05) after 3 days of storage. However, it did not significantly contribute to the fatty acid profiles of Hanwoo steers. Conclusion: Met/lys supplementation resulted in higher protein scores, water holding capacity and lower shear force scores. While met/α-tocopherol supplementation contributes to the production of redder meat, reduces lipid oxidation, production of more tender meat and increases the content of protein and oxymyoglobin percentage.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.217-227
• /
• 1993

Preadjusted appliance, following the original concept of the Andrews Straight-Wire appliance, became increasingly common in the 1980s. In six phases of treatment, anchorage control, leveling and aligning, overbite control, overjet reduction, space closure, and finishing are very effective with using the preadjusted appliances. Space closure is the phase of treatment in which the difference between standard edgewise and preadjusted mechanics is most noticeable. Orthodontists have been able to reduce the use of closing loops and, because of the level slot lineup, enjoy the advantages of sliding mechanics. In 1990, Dr. John C. Bennett and Richard P. McLaughlin introduced the new space closure system, namely, elastic 'tiebacks'. They found an $.019'\times.025'$ working archwire most effective in an .022'-slot system. Hooks of .024' stainless steel or .028' brass wire are soldered to the upper and lower archwires. The force required for space closure is delivered by elastic 'tiebacks'. An elastic modulo stretched by 2-3mm(to twice its normal length) usually delivers 0.5-1.5mm of space closure per month. Group movement and sliding mechanics are combined for gentle, controlled space closure, so that about 0.5mm of incisor retraction and 0.5mm of mesial molar movement can be seen each month. The tiebacks are replaced every four to six weeks. By using the elastic 'tiebacks', the next two cases were treated during space closure. Even though we found some clinical problems of this mechanics, long treatment time, hard to control of vertical dimension and anchorage, the application method of this system is so simple that orthodontists can manage many patients during short chair time. But we must apply this mechanics after perfect understanding of the biomechanics in tooth movement.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.