• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.13-18
• /
• 2008

This study deals with finish roll forming by forced displacement can be conceived as a method of eliminating errors in conventional form rolling under constant loads. This method produces a high-precision tooth profile by low-speed form rolling when a high rigid screw or cam is used at the pressurized section. Tooth profile is decided in the beginning of roll forming and ${\delta}_{max}$ mainly increases if the number of roll forming process is increased. Gear class is improved by one or two class after roll forming if the gear has convex type error and pressure angle error in KS 4 class. If the gear have concave type error and pressure angle error and pressure angle error, gear class is not improved in theory, but improved a little in practice. In the finishing roll forming, it inevitably yields both the concaving of tooth profile and plastic deflection of addendum of teeth. Experiments show that the concaving and the plastic deflection are successfully reduced, the accuracy of tooth profile reaches to KS 0 class.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.48-57
• /
• 2012

A variety of studies on concrete have been performed to examine the advantages for structural material, but less attention has been paid to the contribution of concrete to finishing. Due to this matter, specific management guidelines for construction and quality on exposed concrete have not been clearly established despite more construction cost and quality control are required. This study analyzed a impact factors on the quality by survey of the existing research and practice. Field tests were performed using mock-up models to analyze the quality of exposed concrete according to form manufacture method, concrete mix proportion, and concrete placing method. Results indicate that the quality of exposed concrete was determined by concrete mix proportion and construction managements. Guidelines of quality control on exposed concrete in construction stages were proposed.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.199-207
• /
• 2018

In this study, the properties of polypropylene(PP) non-woven fabric spun under various conditions by the Melt-blown method were verified, and the deodorant content and deodorization of PP non-woven fabric after deodorant-treatment were investigated. PP non-woven fabrics are manufactured by varying the temperature of spin beam, hot air temperature and amount, the RPM of collector R/O and the distance between collector and spinneret, which affects the structure of the non-woven fabric. After that, the structural characteristics and air permeability of the non-woven fabric were measured. The experimental results show that the amount of air, the distance between the collector and the spinneret significantly affect the structural characteristics and air permeability of the PP non-woven fabric. And, regardless of the weight of the PP non-woven fabric, the deodorizing effect of UiO-66 MOF deodorant add-on ratio and content was higher.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1756-1760
• /
• 2016

Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

• Current Photovoltaic Research
• /
• v.4 no.4
• /
• pp.159-163
• /
• 2016

Piled snow upon PV module interferes with Photoelectric Effect process through photovoltaic directly. As a result of this phenomenon, its generation efficiencies keep decreasing or are stuck at zero power generating status. In addition, PV facilities have been installed on those places such as water surface, roof-top, and other isolated places, dealing with conditions of "Securing high REC weighted value", "Difficulty of securing land" and so forth. Through this study, we are able to actualize the function of heating over PV modules when it snows. We adopted laminating method through heating film and modules, guaranteeing warranty more than for 25 years. Also we are trying remote control systemically, not by hardware control, to run parallel with automatic driving and monitoring system which enable to control operation time, insolation, amount of snowfall automatically. We applied analysis of actual proof to both snow removal PV system and general PV power system, and these led to bear power consumption analysis while snow-removing, and its comparison after finishing the task as "One stone, two birds." In the long run, we could carry out economic analysis against snow removal system, and this helps to verify the most maximized control method for snow removal conditons on a basis of weather information. this study shall let prevent people from negligent accidents, and improve power generation problems as mentioned from the top. Ultimately, we expect to apply this system to heavy snowfall regions in winter season in spite of its limited system installaion in Korean territory, initially.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.216-221
• /
• 1990

This study was performed for the development of antimicrobial finished nonwoven fabrics with water repellency. And it was aimed to examine the changes of moisture related properties and air permeability of the finished fabrics. Viscose rayon nonwoven fabrics were treated with organic silicon quaternary ammonium salt having carbon numbers of 16, which was synthesized for this study Antimicrobial activity was evaluated by shake flask method and the reactivity of antimicrobial agent was measured by degree of luminescence from inductively coupled plasma. Water repellency of treated specimen was evaluated by dynamic water absorption measurement and air permeability was measured by Frazier method. The results obtained from this study were as follows: 1. Excellent antimicrobial activity was obtained for the high concentration of treatment and the durability of finishing after laundering was better as the treatment concentration was higher 2. Silicon contents taken up by specimen increased with increased treatment concentration. 3. Dynamic water absortion of treated specimen decreased compared to that of untreated. And, it was lowered as the treatment of concentration increased and as the silicon content increased. 4. Moistuie regain and uptake with lapse of time of treated specimen increased compared to those of untreated. But, air permeability of treated specimen decreased.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.28-38
• /
• 1997

Peach skin fabrics were washed by the general and ultrasonic washing systems using different conditions. The physical properties of the washed fabrics were estimated. The following results were obtained through experimental data and their analysis. The tensile properties were changed due to fabric running speed and washing methods. The lower the running speed, the higher the extensibility and resilience and the lower the linearity and tensile energy. In the general washing method, the extensibility and resilience had lower values than those of the ultrasonic washing method and the linearity and tensile energy had the higher values than those of the ultrasonic washing system. The bending properties, bending moment and histeresis, were estimated. These values were generally lower in the ultrasonic washing system than those of the general washing system. The faster the washing speed, the higher the value of hysterisis. The shear properties were affected by the fabric running speed and washing methods. Shear stiffness and hysteresis of shear forces increased according to the increase of the fabric running speed. The values were higher in the general washing system than those of the ultrasonic washing system. The compressional energy was affected by the fabric running speed. The higher the fabric speed the higher the compressional energy. The ultrasonic washing system had lower compressional energy than the general washing system. The higher the running speed, the lower the coefficient of friction and geometrical roughness. The values of geometrical roughness were infienced by the removal of the sizing agent. The higher the remaining sizing agent, the higher the fabric weight and the thicker the thickness of fabric.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.169-174
• /
• 1994

The reaction layer formed at interface between matrix and fiber has significant effects on the mechanical properties and behaviors of deformation m FRM. In this study, the mechanical properties and interfacial behaviors according to surface finishing on the fibers and according to heat treatment in FRM were investigated. FRM was fibricated by diffusion bonding method. In W/Al alloy composite and W/Al composite, W of which was coated with $WO_3$, the heat treatment was carried out thermal cycling method from 373K to 673K. In W/Al composite, W of which was coated with $WO_3$, growth of interface layer was hardly occured in spite of the increasing various thermal cycles. It was exhibited that oxidized W/Al composite were higher strength than non-oxidezed W/Al composite with the increasing thermal cycles. The compounds of fiber/matrix interface were analyzed into $WAl_{12}$, $WAl_7$, and $AlWO_3$, respectivly. Therefore the interfacial compounds of fiber/matrix seriously affected the mechanical properties and behaviors of deformation in FRM.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.