• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.50-56
• /
• 1999

The adhesive properties of polyester cord in rubber matrix were investigated according to the surface modification. The polyester cord was oxidized in sodium hypochlorite solution, and graft-polymerized with acrylic acid under the irradiation with ultraviolet light, and then coated with resorcinol-formaldehyde latex (RFL). The modified surface was checked with scanning electron microscope. The adhesive properties were measured by the full-Out method, and evaluated with regard to the energy of adhesion and the maximum load. The polyester was not oxidized in sodium hypochlorite solution, so the surface was not able to etch to produce the coarse topology. As the concentration of acrylic acid and the reaction time were increased, the graft yields were also increased. It was considered that the acrylic acid would swell the polyester and diffuse easily to the inner side of substrate. The adhesive properties of polyeser to rubber matrix were affected by the surface condition. Namely, the maximum load was almost same, but the energy of adhesion was rather higher In the polyester grafted with acrylic acid than in control one. We concluded that the flexible aliphatic chains of polyacrylic acid situated in the interface of cord and rubber matrix were distributed well the stress and strain all over the filler resulting the high energy of adhesion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.173-174
• /
• 2014

In this research, the effect of the amount of retarder and the washing timing on the quality of aggregate-exposed concrete produced by water-jet washing method is evaluated as a series of test to develop the aggregate-exposed concrete as a concrete finishing method. As a result, the amount of losing aggregate and surface mortar was increased as the dosage of retarder was increased because of the hydration retarding effect of the retarder. Furthermore, as the washing timing was extended, the mortar on the surface of the concrete was not blown by water jet with 8 to 24 ml of retarder because of hydration of cement, hence the surface quality was poor. Therefore, washing timing of one day after concrete placement showed 90 % of aggregate exposed rate and 24 ml of retarder showed the most favorable result of aggregate exposure.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.51-59
• /
• 2005

To manufacture hightech easycare wool, there are several methods which use strong oxidising agent or the resin treatment, however, neither are environmentally friendly methods. Moreover it may deteriorate the handle. The aim of this study is to manufacture the hightech easycare wool using the modified Fenton method which can be formed by hydrogen peroxide and ferric sulfate and enzyme treatment. The method was pretreated by ferric sulfate on the wool surface and then the surface of wool scale was selectively removed by ferric ion catalyst. Subsequently the Enchiron which is one of the proteolytic enzymes was treated on the wool surface. The treated wool had the result of having optimum weight loss and excellent whiteness and good handle. Therefore implications of these results suggest that this method using the modified Fenton method and enzyme treatment may be one way of manufacturing the hightech easycare wool.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.260-269
• /
• 2012

The aim of this study was to develop higher-value added dyeing materials with the fermentation-dyeing -mordanting system using only the natural ingredients by integrating traditional fermentation techniques with traditional dyeing technique. Nuruk, which is used mainly to ferment traditional foods, was used as a fermenting agent to ferment 5 different types of materials. Acidic burnt alum and alkaline calcium hydroxide were used as natural mordants. The dyeability checked after fermentation showed that both cotton and silk mordanted with Gardenia jasminoides did not show notable changes, and 10 days of fermentation was found to be appropriate. Sophora japonica L. performed better on cotton materials mordanted with slaked lime, and alkaline mordants were found to be more effective than acidic ones. With Rheum coreanum, a fermentation period of more than 24 days ($5^{th}$ fermentation) worked best on cotton material, showing a 5 fold increase in the K/S value after the $5^{th}$ slaked lime fermentation than with no fermentation. Rhus javanica L. was found to increase the color fastness to gentle washing and the fastness to light was found to possess 4 means that natural dyed fabric have the highest level of durability, the grade 1 the lowest level of fastness.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.305-312
• /
• 2012

In this study, we investigated the effects of oxidative permanent hair coloring agents on the dyeability and the damage of human hair. p-phenylenediamine and toluene-2.5-diamine sulfate were used as a hair coloring agent precursers. The degree of dyeability was checked by the change of CIELAB $L^*$ value according to dyeing time. And the damage of hair was evaluated by the tensile strength and morphological change of hair in SEM. When the hair was dyed, the CIELAB $L^*$ value was decreased with dyeing time regardless of the type of precursers. But when the hair was dyed after nutritional treatment, the CIELAB $L^*$ value showed lower level. This means that the nutritional treatment covers the scale of hair and protects the hair from the chemicals.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.27-37
• /
• 2020

Low temperature dyeing properties of wool with reactive dyes and acid dyes were investigated for the feasibility study of their application to hair dyeing. The low temperature(30℃, 40℃) dyeing achieved light depth of shade in wool dyeing and reactive dyeing exhibited relatively higher color strength and chroma values than acid dyeing. Leveling agent slightly improved the levelness of the wool dyeing and the leveling properties of dyed wool at low temperature were good to excellent, irrespective of the dyes applied. Color loss during the repeated shampooing was in the range of 9.6~22.2% for reactive dyes and -7.4~31.5% for acid dyes and in some cases, the color fastness to shampooing was reasonable level. The overall experimental results showed that the application of low temperature wool reactive dyeing to hair dyeing is sufficiently feasible in terms of dyeability and color fastness to shampooing.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.284-293
• /
• 2002

Nylon 6 and polyester taffeta fabrics are dyed in aqueous medium with vat dyes such as Indanthren Red FBB, Mikethren Blue ACE and Mikethren Blue HR varying the compositions of sodium hydrosulfite and NaOH. Also nylon UMF nonwoven and polyester UMF knitted fabrics are dyed with metal complex and disperse dyes as a reference, and the wash and rubbing fastnesses for these dyes are investigated. In vat dyeing of polyester and nylon taffeta, an optimum composition of sodium hydrosulfite/NaOH is existed at a range of 1∼2wt%/0.2wt%. A good build-up property for Mikethren Blue ACE on nylon 6 UMF nonwoven fabric is shown at high temperature. Vat dyeing of polyester with Mikethren Blue Ace shows a good color shade in a higher temperature, while dyeing with Mitsui Blue HR shows low temperatures. Vat dyes In dyeing of both nylon 6 UMF nonwoven and polyester UMF knitted fabrics have a better wash fastnesses compared with metal complex or disperse dyes.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.84-89
• /
• 1996

This study carried out batch and continuous experiments using calcium hydroxide as neutralization agent and immobilization media for removing the ethylene glycol in the pretreated polyester weight loss wastewater. The $TCOD_{Mn}$ concentration in the treated wastewater using culture of iramobilization and suspension for the synthetic wastewater were found as 650mg/l and 1,250mg/l after 48hours, respectively. SVI(Sludge Volume Index) and $TCOD_{Mn}$ concentration were 74 and 73mg/l at optimum F/M ratio, 1.32kg-TCO $D_{Mn}$ /day. kg-MLVSS. The $TCOD_{Mn}$ concentration and removal efficiency were 213mg/l and 93.5% by continuous experiments in the air-lift bioreactor, respectively. The $TCOD_{Mn}$ concentration was 82mg/l, and also the MLVSS concentration was 2,550mg/l, when the volumetric loading rate was 3.04kg-$TCOD_{Mn}/m^{2}$ day for real polyester weight loss wastewater.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.237-244
• /
• 2018

Three super hydrophobic red fluorescence dyes were selected to dye high molecular weight polyethylene fiber. Their absorbance and emission spectra were obtained and Stokes' shift was measured. Fluorescence emission strength of the dyes on the fiber was investigated and therefore Fluoro Red 3 was determined as the best one among those three dyes in this experiment. Dyeing properties and fluorescence intensities were investigated using the Fluoro Red 3 on high molecular weight polyethylene fiber at various dyeing conditions. The optimum concentration of a dispersing agent was appeared at 10wt% in aqueous solution. The best dyeing was obtained at $125^{\circ}C$ for 1 hour. The color fastnesses to the washing and rubbing were as high as ratings 4~5, however, the fastness to light was exhibited ratings 2~3.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.