• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.106-112
• /
• 2002

In the present study, the wettability and interfacial tension between (bare Cu, electroless Ni/cu, immersion Au/Ni/Cu) substrates and indium solder were investigated as a function of soldering temperature, types of flux. The wettability of In solder increased with soldering temperature and solid content of flux. The wettability of In solder was affected by the substrate metal finish used, i.e., nickel, gold and copper. On the bare Cu substrate, In solder wet better than any of the substrate metal finishes tested. Intermetallic compound formation between liquid solder and substrate reduced the interfacial energy and improved wettability. For the identification of intermetallic compounds, X-Ray Diffraction(LRD) were employed. Experimental results showed that the intermetallic compounds, such as Cu11In9 and In27Ni10 are observed f3r different substrates respectively. The wetting kinetics is investigated by measuring wetting time with the wetting balance technique. The activation energy of wetting calculated for the In solder/cu substrate and In solder/electroless Au/Ni/Cu substrate are 36.13 and 27.36 kJ/mol, respectively.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.72-75
• /
• 2004

The focus of this study was on spatial and interior characterization of recently developed and marketed apartments. The house showrooms in the Seoul Metropolitan Areas that have recently been open were selected and analyzed. The floor plans and relevant materials via website for each showroom provided by major housing development companies were examined, and site visits were made. The finding of this study indicated that high-tech systems were applied to heighten security and safety. It was revealed that various exterior design features were adopted and emphasized, so they affected spatial composition and utilization. Another finding was the use of environmentally friendly materials and features as indoor air quality became an emerging concern. Additionally, it was noticed that features in relation to open housing and interior finishes became more customized to meet different needs of consumers. Therefore, the characteristics of recent house showrooms were summarized into high-tech, environmental friendliness, and customization.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.232-233
• /
• 2019

The plater work in the standard of estimate presents a variety of construction types. However, there is a part that does not fit the change of specification standards and on-site construction status, and it was revised in 2019's standard of estimate. In this study, we analyzed in detail the factors affecting the changes in estimating standards in the plater work. There were changes in the specification standards previously presented as primary coat, secondary coat, and formal coat as well as changes in on-site construction status such as thickness according to the number of plastering. Therefore, it is analyzed that the estimating standards can be classified by the number of finishes according to the site conditions by reflecting the analysis of the specification standards and site application status, and suggesting the finishing standards according to the number of plastering.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.213-214
• /
• 2019

Oriented strand board(O.S.B) is used in many areas, such as interior and interior finishes of wooden houses, but no cases and studies have been used as flooring materials for flooring boards. In this study, we will examine the quality and performance of the aromatic strands board, which we believe can be substituted for the plywood, and analyze its suitability as a floorboard.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.186-187
• /
• 2019

In modern times, due to the centralized urban structure, the interval between buildings is narrow and the increase of the heat island phenomenon due to the accumulation of the structure is becoming a social problem. In order to solve these problems, various materials for reducing the surface temperature of buildings are under study. Particularly, in the case of a wall part which is a part directly affected by the outside air of the building, it is a main structural part for determining the room temperature. The purpose of this study was to develop a material that can improve the thermal environment performance of the building by evaluating the temperature control performance of the exterior finishing material using the heat reflecting material as a method for controlling the temperature of the outer wall finishing material.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2009

Abstract JPEG2000 achieve quality scalability through the rate control method used in the encoding process, which embeds quality layers to the code-stream. This architecture might raise two drawbacks. First, when the coding process finishes, the number and bit-rates of quality layers are fixed, causing a lack of quality scalability to code-stream encoded with a single or few quality layers. Second, in Post compression rate distortion (PCRD) the bit streams after the truncation points discarded. Therefore, computational power for the discarded bit streams is wasted. For solving of problem, through bit rate control, there are many researches. Each proposed algorithms have specially target feature that is improved performance like reducing computational power. Research results have strength and weakness. For the mean time, research contents are reviewed and compared, so we proposed research direction in the future.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2467-2469
• /
• 2001

A strategy for the swing-up and stabilization control method for a two-links rotational pendulum according to states of each link of the rotational pendulum is proposed. The proposed controller consists of two modes of control such as divergence mode and stabilization mode. When the controller is in divergence mode, control input is generated using sinusoidal function, which is developed based on resonance period of the pendulum in linear region, to make the second link (pendulum) reach top position. After the controller finishes operation in divergence mode, stabilization control is initiated to keep the pendulum around the top position using pole placement control method. Experimental results are given to show the effectiveness of the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.533-544
• /
• 2003

The purpose of this study was to provide practical information to design woolen fabrics in terms of structural and surface characteristics, which produce texture images of fabrics. The relationship among structural, surface characteristics and texture images, and preference and purchase intention were analyzed. To evaluate the texture images of the fabrics subjectively, 7 rank＇s semantic differential scale questionnaires were developed with thirty adjective pairs. Blind and non-blind test were performed with 320 female subjects who were in their 20-30＇s. Commercially available 48 woolen fabrics were used as specimens. Results showed that five factors were obtained: classic, elegance, warmth, natural and casual. These factors were closely related to fiber type, weave type, fabric counts, and finishes.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.95-101
• /
• 2013

MANET has an advantage that can build a network quickly and easily in difficult environment to build network. In particular, routing protocol that uses in existing mobile environment cannot be applied literally because it consists of only mobile node. Thus, routing protocol considering this characteristic is necessary. Malicious nodes do extensive damage to the whole network because each mobile node has to act as a router. In this paper, we propose technique that can detect accurately the suspected node which causes severely damage to the performance of the network. The proposed technique divides the whole network to zone of constant size and is performed simultaneously detection technique based zone and detection technique by collaboration between nodes. Detection based zone translates the information when member node finishes packet reception or transmission to master node managing zone and detects using this. The collaborative detection technique uses the information of zone table managing in master node which manages each zone. The proposed technique can reduce errors by performing detection which is a reflection of whole traffic of network.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.532-535
• /
• 2003

In this paper, we propose a new algorithm that can enhance the speed of template matching of hand vascular pattern person verification or recognition system. Various template matching algorithms have advantages in the matching accuracy, but most of the algorithms suffer from computational burden. To reduce the computational amount, with accuracy maintained, we propose following template matching scenario as follows. firstly, original hand vascular image is re-sampled in order to reduce spatial resolution. Secondly, reconstructed image is projected to vertical and horizontal direction, being converted to two one dimensional (1D) data. Thirdly, converted data is used to estimate spatial discrepancy between stored template image and target image. Finally, matching begins from where the estimated order is highest, and finishes when matching decision function is computed to be over certain threshold. We've applied the proposed algorithm to hand vascular pattern identification application for biometrics, and observed dramatic matching speed enhancement. This paper presents detailed explanation of the proposed algorithm and evaluation results.