• Title/Summary/Keyword: fingerprint image

Search Result 240, Processing Time 0.033 seconds

A preliminary study of semi-quantitative, comparative evaluation of split or half fingerprints using Densitometric Image Analysis (DIA) - Inter-analyst differences for split or half fingerprints -

  • Song, Minkyu;Kim, Seung-chan;Choi, Sung-Woon
    • Analytical Science and Technology
    • /
    • v.34 no.2
    • /
    • pp.56-67
    • /
    • 2021
  • Due to the difficulty of grading visualized fingerprints with previously known evaluation methods for the comparison of split fingerprints, a preliminary study was performed with the densitometric image analysis (DIA) method as a potential quantitative and supplementary evaluation method. Each image of inked split fingerprints was divided into 4 zones for analysis. Weekly intra- and inter- analysis by two analysts with three whole fingerprints that were constructed by combining inked split fingerprints showed that the average area values and the ranges of difference fluctuation were not significantly different between strong fingerprints and strong-weak pairs, while they were different in weak fingerprints and weak-weak pairs. In the case of weak fingerprints, the exact acquisition of ridges was difficult and this seemed to influence the results. An additional study is needed for the improved reliability using DIA method with weak fingerprints such as 8 zones division rather than 4 zones. In addition, the analysis results performed by several analysts at different times should be used to improve the reliability of the analysis method further. Based on the above result, it can be judged that utilizing the DIA method as a secondary evaluation method of the existing scoring system would be effective with the additional studies especially on weak fingerprints.

Adaptive Image Enhancement with Fingerprint Image Quality Characteristics (지문영상의 품질특성에 따른 적응적 영상개선)

  • 윤은경;조성배
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.10b
    • /
    • pp.529-531
    • /
    • 2003
  • 지문영상으로부터 특징점을 정확하게 추출하는 것은 효과적인 지문인식 시스템 구축에 매우 중요하다. 하지만 입력영상의 품질에 따라 특징점 추출의 정확도가 좌우되기 때문에 영상 전처리 과정이 필요하다. 대부분의 품질평가 연구들이 매우 낮은 품질의 영상 제거나 제안하는 방법의 성능평가를 위해 진행되었다. 본 논문에서는 입력영상으로부터 명암값의 평균 및 분산, 블록방향성차, 방향성 변화도, 융선과 골 두께 비율 등 5가지 특징을 추출하여 계층적 클러스터링 알고리즘을 이용하여 영상특성을 분석 후, oily/neutral/dry 특성에 적합하게 영상을 개선하는 방법을 제안한다. NIST DB 4와 인하대학교 데이터를 이용하여 실험한 결과, 클러스터링을 통해 영상의 특성을 제대로 구분함을 확인할 수 있었다. 또한 제안한 적응적 전처리 방법이 성능평가를 위해 측정한 quality index와 블록방향성차를 향상시킴을 확인할 수 있었다.

  • PDF

Organic Photorefractive Composites for Optical Information Processing

  • Oh, Jin-Woo;Hwang, Ui-Jung;Choi, Chil-Sung;Kim, Nak-Joong
    • Proceedings of the Polymer Society of Korea Conference
    • /
    • 2006.10a
    • /
    • pp.164-164
    • /
    • 2006
  • Polymeric photorefractive materials exhibit two attractive features, the large refractive index modulation (up to the order of $10^{-2}$) and the optical erasabilility of recorded holographic information. These advantages make the organic photorefractive materials to become candidates for optical data processing, e.g., pattern recognition and fingerprint verification. In this work, we demonstrate optically controlled SLMs using photorefractive composite. An incoherent image imposed in Xe-lamp light was converted into a coherent image.

  • PDF

A preliminary study to determine the order of the latent fingerprint deposition on thermal paper - A short term study - (감열지상 잠재지문의 남겨진 순서결정에 대한 예비적 연구 - 단기연구 -)

  • Lim, Dong-A;Ok, Yun-Seok;Heo, Bo-Reum;Choi, Sung-Woon
    • Analytical Science and Technology
    • /
    • v.30 no.5
    • /
    • pp.279-286
    • /
    • 2017
  • Determination of the order of latent fingerprints deposition on the surface of thermal paper, often found in crime scenes, is related to the study of time course and aging of fingerprints and can provide additional information in criminal investigations. A preliminary study was performed to determine the deposition order of fingerprints left with two different conditions of deposition pressure and time (in seconds) after 1 day intervals for 7 days on thermal paper (receipt and fax thermal paper) using an iodine fuming method. The resultant images of the visualized fingerprints were analyzed with densitometric image analysis to measure the changes in the areas of the ridges, which can be correlated to the deposition order. No significant variation was found with the different types of thermal paper. The average areas of the friction ridges increased gradually or were similar to the values from day 1 for 3 days, and then a continual decrease was shown from day 4 through day 7. The area values from day 6 and day 7 were less than half of those from day 1. Furthermore, the test with overlapped fingerprints showed the possibility of differentiation between fingerprints that are 1-3 and 6-7 days old based on the clarity visible to the naked eye. Additional experiments with the deposition conditions can prove that the current method is valuable for the determining the order of fingerprint deposition on thermal paper.

Iris Recognition Using a Modified CPN (CPN을 이용한 홍채 인식)

  • Hong, Jin-Il;Yang, Woo-Suk
    • Journal of IKEEE
    • /
    • v.6 no.1 s.10
    • /
    • pp.10-20
    • /
    • 2002
  • The purpose of this work is to develop a system fer rapid and automatic identification of persons, with high reliability and confidence levels. The iris of the eye is used as an optical fingerprint, having a highly detailed pattern that is unique for each individual and stable over many years. Image analysis algorithms find the iris in a image, and encode its texture into an iris code. Iris texture is extracted from the image at multiple scales of analysis by wavelet transformation. The features of many different parts of the iris are projected onto the space-frequency space. They are used to determine an abstract iris code which is similar to 2D barcode. Pattern recognition is achieved by using modified CPN.

  • PDF

The Extraction of the Singular Point from Ridge Direction Information for Fingerprint Recognition (지문인식 시 융선 방향정보로부터 특이점의 추출)

  • 이형교;윤동식;이종극
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.2
    • /
    • pp.119-125
    • /
    • 2004
  • The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.

  • PDF

Enhanced Vein Detection Method by Using Image Scaler Based on Poly Phase Filter (Poly Phase Filter 기반의 영상 스케일러를 이용한 개선 된 정맥 영역 추출 방법)

  • Kim, HeeKyung;Lee, Seungmin;Kang, Bongsoon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.22 no.5
    • /
    • pp.734-739
    • /
    • 2018
  • Fingerprint recognition and iris recognition, which are one of the biometric methods, are easily influenced by external factors such as sunlight. Recently, finger vein recognition is used as a method utilizing internal features. However, for accurate finger vein recognition, it is important to clearly separate vein and background regions. However, it is difficult to separate the vein region and background region due to the abnormalized illumination, and a method of separating the vein region and the background region after normalized the illumination of the input image has been proposed. In this paper, we proposed a method to enhance the quality improvement and improve the processing time compared to the existing finger vein recognition system binarization and labeling method of the image including the image stretching process based on the existing illumination normalization method.

A Study on Edge Detection using Directional Mask in Impulse Noise Image (임펄스 잡음 영상에서 방향성 마스크를 이용한 에지 검출에 관한 연구)

  • Lee, Chang-Young;Kim, Nam-Ho
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.15 no.4
    • /
    • pp.135-140
    • /
    • 2014
  • As the digital image devices are widely used, interests in the software- and the hardware-related image processing become higher and the image processing techniques are applied in various fields such as object recognition, object detection, fingerprint recognition, and etc. For the edge detections Sobel, Prewitt, Laplacian, Roberts and Canny detectors are used and these existing methods can excellently detect the edges of the images without noise. However, in the images corrupted by the impulse noise, these methods are insufficent in noise elimination characteristics, showing unsatisfactory edge detection. Therefore in this paper, in order to obtain excellent edge detection characteristics in the corrupted image by the impulse noise, an detection algorithm is porposed, which uses the central pixel of mask divided by four regions along the axis, calculates the estimated mask according to the representing pixel values in each regions, and detects the final edges by applying the estimates mask and the new directional one.

Energy-Efficient Biometrics-Based Remote User Authentication for Mobile Multimedia IoT Application

  • Lee, Sungju;Sa, Jaewon;Cho, Hyeonjoong;Park, Daihee
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.12
    • /
    • pp.6152-6168
    • /
    • 2017
  • Recently, the biometric-based authentication systems such as FIDO (Fast Identity Online) are increased in mobile computing environments. The biometric-based authentication systems are performed on the mobile devices with the battery, the improving energy efficiency is important issue. In the case, the size of images (i.e., face, fingerprint, iris, and etc.) affects both recognition accuracy and energy consumption, and hence the tradeoff analysis between the both recognition accuracy and energy consumption is necessary. In this paper, we propose an energy-efficient way to authenticate based on biometric information with tradeoff analysis between the both recognition accuracy and energy consumption in multimedia IoT (Internet of Things) transmission environments. We select the facial information among biometric information, and especially consider the multicore-based mobile devices. Based on our experimental results, we prove that the proposed approach can enhance the energy efficiency of GABOR+LBP+GRAY VALUE, GABOR+LBP, GABOR, and LBP by factors of 6.8, 3.6, 3.6, and 2.4 over the baseline, respectively, while satisfying user's face recognition accuracy.

Synthesis and Property of Pyrene-Naphthalene Diimide-Pyrene Triad (Pyrene-Naphthalene Diimide-Pyrene Triad의 합성 및 물성에 대한 연구)

  • Kim, Hyunji;Kim, A-Rong;Park, Jong S.
    • Textile Coloration and Finishing
    • /
    • v.26 no.4
    • /
    • pp.305-310
    • /
    • 2014
  • In this study, we presented a newly synthesized pyrene-naphthalene diimide(NDI)-pyrene triad. The optical and structural properties were examined using various characterization techniques. A donor-acceptor-donor triad molecule exhibited a strong charge transfer, though there existed neither intramolecular nor intermolecular hydrogen bonding sites, due to the formation of preferential complementary complex between pyrene and NDI. Powder XRD measurement revealed a sharp and distinctive X-ray patterns, indicating the presence of microcrystalline-like structure. POM images showed anisotropic fingerprint texture similar to that of cholesteric phase, and SEM images showed numerous columnar structures with length of 1 to $10{\mu}m$. Above observation clearly demonstrated that ${\pi}$-complementary NDI-pyrene interactions in the traid was strong enough to form columnar aggregates in the long range.