• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3651-3656
• /
• 2012

The size-segregated atmospheric aerosols have been collected at 1100 m site of Mt. Halla in Jeju, a background area in Korea, using 8-stage cascade impact air sampler during Asian dust and non-Asian dust storm periods. Their ionic and elemental species were analyzed, in order to examine the pollution characteristics and composition change between Asian dust and non-Asian dust periods. The major ionic species such as nss-$SO_4{^{2-}}$, $NH_4{^+}$, and $K^+$ were predominantly distributed in the fine particles (below $2.1{\mu}m$ diameter), and besides the $NO_3{^-}$ was distributed more in coarse particle fraction than fine particle. On the other hand, the typical soil and marine species i.e., nss-$Ca^{2+}$, $Na^+$, $Cl^-$, and $Mg^{2+}$, were mostly existed in the coarse particles (over $2.1{\mu}m$ diameter). As well in the elemental analysis of aerosols, the major soil-originated Al, Fe, Ca, and others showed prominently high concentrations in the coarse particle fraction, whereas the anthropogenic S and Pb were relatively high in the fine particle fraction. From the comparison of aerosol compositions between Asian dust and non-Asian dust periods, the concentrations of the soil-originated species such as nss-$Ca^{2+}$, Al, Ca, Fe, Ti, Mn, Ba, Sr have increased as 2.7-4.2 times during the Asian dust periods. Meanwhile the concentrations of nss-$SO_4{^{2-}}$ and $NO_3{^-}$ have increased as 1.4 and 2.0 times, and on the contrary $NH_4{^+}$ concentrations have a little bit decreased during the Asian dust periods. Especially the concentrations of both soil-originated ionic and elemental species increased noticeably in the coarse particle mode during the dust storm periods.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.310-313
• /
• 2005

The conical fluidizing system of a binary mixture of Geldart C powders and Geldart A particles was defined as the conical powder-particle fluidized bed. We used a cold conical powder-particle fluidized bed model having a 0.104m-I.D. and 0.6m-high with an apex angle of $10^{\circ}$ for fluidization of a binary powder-particle mixture of 50 $vol\%$ fine carbon black powders (HI-900L, Korea Carbon Black Co.) and coarse alumina particles $(90{\mu}m)$ under different superficial gas velocities (0-0.1 m/s). The differential bed pressure drop increases with increasing gas velocity, and it goes from zero to a maximum value with increasing or decreasing gas velocity. In the conical fluidized beds of fine powders, demarcation velocities of the partial fluidization, full fluidization, partial defluidization was not observed.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.305-311
• /
• 2012

화력발전소에서 발생되는 석탄 바닥재(이하 바닥재로 칭함)를 재활용하기 위하여 이를 적점토와 혼합, 소성하여 인공골재를 제조함에 있어, 바닥재의 입도와 배합비를 실험변수로 하여 인공골재의 특성을 제어하였다. 채취된 바닥재는 2 mm 이상의 입자들이 38 wt% 존재하는 거친 입도를 나타내었으며, 미연탄 덩어리들과 다공성 슬래그들이 혼재하였으나, 이를 체가름 및 분쇄공정을 통하여 세립(100 ${\mu}m$ 이하) 및 조립(2 mm 이하) 입도를 갖는 2가지 바닥재로 분리하였다. $1100{\sim}1200^{\circ}C$의 조건에서 직화 소성된 인공골재의 물성 측정 결과, 세립 바닥재로 제조된 인공골재는 조립 바닥재로 제조된 경우보다 높은 부피비중과 낮은 흡수율을 나타내었다. 또한 조립 바닥재로 제조된 인공 골재는 내부에 다공성 슬래그와 미연탄 덩어리로 인해 불균일하고 치밀하지 못한 구조를 나타낸 반면, 세립 바닥재로 제조된 인공골재는 상대적으로 치밀하고 균일하였다. 본 연구를 통해 바닥재의 입도 및 조성변화를 통해 인공골재의 비중 및 흡수율을 각각 1.2~1.7 및 13~21 % 범위로 제어할 수 있음을 확인하였고, 따라서 바닥재 인공골재는 향후 건축/토목 등의 재료로 폭넓게 활용될 것으로 기대된다.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.864-870
• /
• 2018

고체 수송관(standpipe, 내경 0.025 m)으로 연결된 2 단 기포 유동층(내경 0.1 m, 높이1.2 m)에서 붕괴 속도에 대한 하단 층 높이의 영향을 조사하였다. 기체로는 공기를 사용하였고, 고체로는 입도가 큰 입자(< $1000{\mu}m$, 겉보기 밀도 $3625kg/m^3$)와 입도가 작은 입자(< $147{\mu}m$, 겉보기 밀도 $4079kg/m^3$)를 혼합한 입자를 사용하였다. 작은 입자의 혼합비, 하단 유동층의 층 높이, 상단 유동층 분산판을 실험 변수로 고려하였다. 붕괴 속도는 하단 유동층의 정체 층 높이가 증가할수록 증가하였다. 그러나 작은 입도의 혼합비가 증가하면 이 효과가 감소하였다. 이 효과는 층 높이 증가에 따른 고체 수송관 압력 강하의 증가 때문이 아니라, 수송관 출구를 막는 농후상 굵은 입자 층 높이의 증가 때문으로 보였다. 상단 유동층 분산판 압력 강하의 증가는 붕괴 속도를 조금 감소시켰다. 붕괴 속도를 예측하는 개선된 상관식을 제안하였다.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.39-46
• /
• 2003

The experiments about dyeing concentration, temperature and time were done using yellow, red and purple loess as natural inorganic dyes in order to verify a degree of dyeing, characteristics of color and fastness. The results were as following; 1. As a result of analyzing components of loess, purple loess was much than other loess in quartz component and coarse particles contained. This affected to the degree of dyeing. 2. The stronger dyeing concentration was, the more the degree of dyeing was improved, and yellow loess containing fine particles was the best in the degree of dyeing. 3. When it was dyed with raising up to $100^\circ{C}$ for 10 minutes after stirring for 20 minutes at $60^\circ{C}$, was better than on starting at $40^\circ{C}$ or $80^\circ{C}$ in the degree of dyeing. Also yellow loess was the best in these experiments. 4. Washing fastness of loess was low such as other natural dyes, but dyeing wasn't transferred to other textiles. On the other hand, light fastness of it was very excellent and rubbing fastness was relatively good as 3~3.5.

• 한국대기환경학회지
• /
• 제20권5호
• /
• pp.685-695
• /
• 2004

Size-segregated measurements of aerosol composition are used to estimate the transport of natural and anthropogenic aerosols at Gosan site during May 2002. The results of measurement show that not only soil dust but also anthropogenic aerosols, including sulfur and enriched trace metals such as Pb, Zn, Cu, are transported to Gosan. This study combines the size- and time-resolved aerosol composition measurements with factor analysis in order to identify some source materials. As a result, coarse particles (2.5${\mu}m$~12${\mu}m$) are influenced by soil, sea-salt, coal, coal combustion, and nonferrous sources. But fine particles have different sources. The fine particles, which the diameter is from 0.56${\mu}m$ to 2.5${\mu}m$, are more affected by road dust, oil combustion, industry. municipal incineration, and ferrous metal sources. The very fine particles, from 0.09${\mu}m$ to 0.56${\mu}m$, mainly supplied by biomass burning, oil combustion, nonferrous and ferrous metal sources.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.295-296
• /
• 2003

최근 환경오염에 대한 인식과 규제가 증가하고 쾌적한 주변환경에 대한 관심이 높아짐에 따라 대기, 물, 토양, 생물 등과 같은 여러가지 환경시료의 분석을 통하여 오염의 정도를 파악하고 오염원을 규명하여 환경관리정책에 반영하려는 노력이 추진되고 있다. 여러 가지 환경시료중 대기분진은 자연적 또는 인위적 발생원에 따라 다양한 원소들을 함유하고 있기 때문에 대기환경지표시료로 이용되고 있다. 오염원의 규명을 위한 소량의 휠터상 분진시료로부터 원소의 정확한 분석은 필수적이고 중요한 선행작업이며 적합한 측정분석법의 이용이 요구된다. (중략)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 추계학술대회 논문집
• /
• pp.288-289
• /
• 2002

최근 환경오염에 대한 인식과 규제가 증가하고 쾌적한 주변환경에 대한 관심이 높아짐에 따라 대기, 물, 토양, 생물 등과 같은 여러 가지 환경시료의 분석을 통하여 오염의 정도를 파악하고 오염원을 규명하여 환경관리정책에 반영하려는 노력이 추진되고 있다. 여러 가지 환경시료 중 대기분진은 자연적 또는 인위적 발생원에 따라 다양한 원소들을 함유하고 있기 때문에 대기관측시료로 이용되고 있다. (중략)

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.19-27
• /
• 2000

Particle Induced X-ray Emission (PIXE) and Elemental Analysis Syztem (EAS) were applied to the investiga-tion of the Characteristics and sources of wintertime atmospheric aerosols in Seoul. Atmospheric aerosols were collected by both fine and coarse fractions using a two-stage filter pack sampler from Kon-Kuk university during the winter season of 1999. PIXE was applied to the analysis of the middle and heavy elements with atomic numbers greater than 14(Si) and EAS was applied to the measurement of the light elements such as H, C and N. The fact that 64.2% of mass of fine particles in Seoul consists of the light elements (N, C , and H) suggests that the measurement of light elements is extremely important. The average mass concentration is Seoul was 38.6$\mu\textrm{g}$m(sup)-3. Elements such as Ca, Fe, Mg, and Ti appeared to have very low Fine/Coarse ratios(0.1∼0.4), whereas che-mical components related to anthropogenic sources such as Br, V, Pb, and Zn were observed to accumulate in the fine fraction. In the Asian Dust Storm(ADS) event, the concentation of soil components increased dramatically. Reconstruction of the fine mass concentrations estimated by a newly revised simple model was fairly in good agreement with the measured ones. Source identification was attempted using the enrichment factor and Pearsons coefficient of correlation. The typical elements derived from each source could be classified by this method.

• 한국안전학회지
• /
• 제13권3호
• /
• pp.112-118
• /
• 1998

This work has been carried out to study the mixing characteristics of solid in vibrating feeder for stable operations of fluidized bed combustion. The system consisted of two particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. Effect of particle size, particle densities, vibration amplitude and vibration frequency were experimentally obtained. Also, a diffusion model was applied in interpreting the experimental results. From these results, the following empirical equation for the diffusivity was obtained. $0.87{(\frac{d_c}{d_f})}^{0.73}\;{(\frac{\rho_f}{\rho_c})}^{0.53}(A^2f)$.