• 청정기술
• /
• 제12권4호
• /
• pp.238-243
• /
• 2006

본 연구에서는 용융 전로슬래그를 고속의 공기를 이용하여 급랭한 전로슬래그의 골제 특성을 조사하고 이를 잔골재로 재활용한 모르타르의 특성을 분석하였다. 급랭전로슬래그의 입자형태는 구형이었으며 냉각 속도의 차이로 인해 표면층과 내부층 그리고 외부와 연결된 공동을 가지고 있었다. 표준사를 구형 급랭전로슬래그로 대체한 혼합 잔골재의 특성을 분석한 결과 대체 비율이 증가하면서 비중, 단위용적중량 그리고 조립율이 증가하였으며 실적률은 대체 비율 75%에서 최대를 나타내었다. 흡수율은 대체 비율 50%에서 최소값을 보였다. 혼합 잔골재의 구형 급랭전로슬래그 대체 비율이 증가할수록 굳지 않은 모르타르의 유동성이 증가하여 동일한 플로우값을 얻기 위한 물/시멘트 비는 감소하였다. 구형 급랭전로슬래그 대체 비율이 증가할수록 양생한 모르타르 시편의 조직은 치밀하였으며 비중은 증가하였다. 압축강도의 경우는 대체율 75%에서 최대값을 보였다.

• 한국수산과학회지
• /
• 제37권4호
• /
• pp.323-329
• /
• 2004

In situ particle size and volume concentration of suspended sediment was measured at the mouth of Seomjin River Estuary In February 2001, using an optical instrument, 'LISST-100'. Time variation of in situ particle size and concentration shows: (1) during ebb tide, Seomjin River supplies relatively fine-grained particles with less-fluctuated, compared to during flood tide, and well-behaved concentrations following the tidal cycle; and (2) during flood tide, relatively coarse-grained particles with highly variable in size distribution and concentration flow upstream from Kwangyang Bay. This explains a poor correlation $(r^{2}=0.10)$ between sediment concentration and beam attenuation coefficient during flood and a high degree of correlation $(r^{2}=0.80)$ during ebb tide. Relatively fine grained and well defined, monotonous size distribution may promote the correlation between concentration and beam attenuation coefficient due to optical homogeneity of particles during ebb tide. Abundance of large aggregates with time-varying size and shape distributions may be mainly responsible for variations in optical properties of the sediment during flood tide, and thus may confound the relationship between the two variables. The difference in particle sizes and shapes between flood and ebb tides can also be observed on SEM images.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.100-110
• /
• 2022

Corrosion of steel reinforcement is the most important mode of concrete structures damages. It strongly depends on the composition and physicochemical properties of the cementitious medium. The use of waste materials as lightweight aggregates in concrete is environmentally recommended in polluted environments such as marine and/or industrial atmospheres in order to reduce its porosity and ensure the requested protection of reinforcing steel. The present study investigated the effect of waste cork addition on corrosion resistance of steel rebar in mortar specimen prepared in the laboratory. The main objective of this study was to improve the corrosion resistance of reinforcing steel. Another objective of this study was to valorize this ecological product and preserve the environment. Results obtained from various electrochemical tests indicated that the presence of a fine cork powder substantially improved the corrosion resistance of steel in the mortar contaminated by chloride ions. This improvement was reflected by a notable decrease in corrosion current density and a shift of corrosion potential of the steel towards more noble values. Moreover, the presence of a fine cork powder in the mortar had no adverse effect on its mechanical properties.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.25-31
• /
• 2012

Tin(II) acetate 전구체를 사용한 습식 환원 합성법으로 나노입자를 제조하는 공정에서 친환경 환원제(슈거) 및 캡핑제(젤라틴)를 사용하여 합성 조건 및 합성 시간에 따른 주석 나노입자의 합성 특성을 분석하였다. 글루코스 환원제를 사용하여 $70-110^{\circ}C$의 온도에서 합성 시 불규칙한 사슬 형태로 군집체를 이루면서 배열된 환원 나노입자들이 관찰되었다. FFT 패턴 분석으로부터 이러한 나노입자들은 $SnO_2$ 상으로 분석되었다. 수크로오스 환원제로 사용하여 $110^{\circ}C$에서 합성을 실시한 경우에서는 3시간의 합성 시간에서 평균 약 10 nm급의 미세한 구형 나노입자들을 형성시킬 수 있었으나, 합성 시간을 9시간으로 증가시킨 경우에서는 불규칙하게 뭉친 나노입자들 외에도 사슬 형태의 나노입자 군집체들이 국부적으로 형성되는 거동이 관찰되었다. 그러나 $130^{\circ}C$ 합성 시에는 사슬 형태의 나노입자 군집체들만을 관찰할 수 있었다. 그 결과 구형의 나노입자는 순수 Sn 상으로, 사슬 형태 나노입자 군집체들은 $SnO_2$ 상으로 각각 분석되었다.

• 한국전산구조공학회논문집
• /
• 제37권1호
• /
• pp.33-40
• /
• 2024

해양폐기물 중 하나인 패각의 발생량은 매년 증가하고 있으나, 대부분이 해안 근처에 야적되거나 방치되어 환경적·사회적으로 문제가 되고 있다. 천연 골재 부존량 감소에 따른 골재 대체재로서 패각이 사용된다면 재료 수송에 따른 물류비용을 효과적으로 감축시킬 수 있어 자원 재활용을 활성화할 수 있다. 본 연구에서는 3D 콘크리트 프린팅 기술을 활용한 해양 구조물의 건설 재료로서 패각 잔골재의 사용 가능성을 분석하였다. 패각을 활용한 3D 프린팅 콘크리트는 패각 잔골재와 시멘트 풀 계면 등의 공극 요인으로 일반 콘크리트 대비 낮은 강도를 가지기 때문에 역학적 성능 평가를 위한 미세구조 특성 분석이 요구된다. 유동성, 출력성 및 적층성을 고려하여 3D 프린팅 콘크리트의 배합을 선정하였으며, 패각 잔골재를 활용한 3D 프린팅 콘크리트 시편의 물성과 미세구조를 분석하였다. 시편의 물성을 평가하기 위해 3D 프린터로 압축강도와 부착강도 시편을 제작하였고 강도 시험을 진행하였다. 미세구조를 분석하기 위해 고해상도 이미지를 얻을 수 있는 SEM 촬영을 수행하였으며, 히스토그램 기반 상 분리 방법을 적용하여 공극을 분리하였다. 패각 잔골재 종류에 따른 공극률을 확인하고 확률함수를 활용하여 공극 분포 특성을 정량화하였으며, 패각 잔골재의 종류에 따른 시편의 역학적 물성과 미세구조 특성 간의 상관관계를 확인하였다.

• 대한세포병리학회지
• /
• 제11권2호
• /
• pp.93-97
• /
• 2000

Epithelial-myoepithelial carcinoma is an uncommon, low grade malignant epithelial neoplasm and metastasis is exceedingly rare. This article highlights the fine needle aspiration cytology(FNAC) of a case of metastatic epithelial-myoepithelial carcinoma of the scalp. A 51-year-old female presented with the left parietotemporal scalp mass two months after the lett parotidectomy for epithelial-myoeplthelial carcinoma. FNAC from the scalp mass showed a biphasic population of ductal epithelial and myoeplthelial origin. These epithelial aggregates were numerous and formed a distinct three dimensional architecture in the background of numerous naked nuclei. The three dimensional architectures were predominantly composed of tightly cohesive eosinophilic ductular epithelial cells which tended to aggregate, overlap, and form tubules. Clear myoepithelial cells in three dimensional tissue fragment were inapparent and a few were attached to the periphery of the fragments. A few myoepithelial cells with clear abundant vaculoated cytoplasm were found In the foamy background. The cytological diagnosis was metastatic epithelial-myoepithelial carcinoma. The histologic findings of the scalp mass were those of typical epithelial-myoepithelial carcinoma. Cytologic distinction of epithelial-myoepithleial carcinoma, pleomorphic adenoma, and adenoid. Cytologic carcinoma may be very difficult but careful attention to clinical features and cellualr details can classify these neoplasms correctly.

• 자원환경지질
• /
• 제19권2호
• /
• pp.133-146
• /
• 1986

Primary uraninite and secondary uranium minerals such as torbernite, metatorbernite, tyuyamunite, metatyuyamunite, autunite and metaautunite have been identified from various types of uranium ores. Uranium minerals occur as accessory minerals in both the primary and secondary ores. Low·grade uranium ores consist of various kinds of primary and secondary minerals. Major constituent minerals of primary uranium ores are graphite. quartz. Ba-feldspar and sericite/muscovite, and accessories are calcite, chlorite, fluorapatite, barite, diopside, sphene, rutile, biotite, laumontite, heulandite, pyrite, sphalerite and chalcopyrite, and secondary minerals consist of kaolinite, gypsum and goethite. Uraninite grains occur as microscopic very fine-grained anhedral to euhedral disseminated particles in the graphitic matrix, showing well·stratified or zonal distribution of uranium on auto-radiographs of low-grade uranium ores. Some uraninite grains are closely associated with very fine-grained pyrite aggregates, showing an elliptical form parallel to the schistosity. Some uraninite grains include extremely fine-grained pyrite particle. Sphalerite and pyrite are often associated with uraninite in graphite-fluorapatite nodule. The size of uraninite is $2{\mu}m$ to $20{\mu}m$ in diameter. Low-grade uranium ores are classified into 5 types on the basis of geometrical pattern of mineralization. They are massive, banded, nodular, quartz or sulfide veinlet-rich and cavity filling types. Well-developed alternation of uranium-rich and uranium-poor layers, concentric distribution of uranium in graphite-fluorapatite nodule and geopetal fabrics due to the load cast of the nodule suggest that the uranium was originally deposited syngenetically. Uraninite crystals might have been formed from organo-uranium complex during diagenesis and recrystallized by metamorphism. Secondary uranium minerals such as torbernite, tyuyamunite and autunite have been formed by supergene leaching of primary ores and subsequent crystallization in cavities.

• 대한세포병리학회지
• /
• 제7권1호
• /
• pp.44-50
• /
• 1996

Small cell carcinoma of the lung is characterized by cells with finely stippled chromatin and scanty cytoplasm as well as a particularly aggressive clinical course and favorable response to the chemotherapy. Recently percutaneous fine needle aspiration (FNA) biopsy has become both widely established and highly respected for the diagnosis of lung cancer. However metastatic small cell carcinoma of lymph node should be cytologically differentiated from the small round cell tumor of particular sites, especially malignant lymphoma, because small ceil carcinoma of classic oat cell type nay simulate small cell non-Hodgkin's lymphoma. We report five cases of metastatic small cell carcinoma of in-termediate cell type diagnosed by FNA of the enlarged lymph nodes of the neck and axilla. The cytologic smears contained diffuse small neoplastic cells larger than lymphocytes with dense, pyknotic nuclei and extremely scanty cytoplasm. Apparently viable large tumor cells have vesicular nuclei with granular, sometimes very coarse chromatin. The characteristic cytologic features of small cell carcinoma as compared to malignant lymphoma were as follows.: 1) small cells with dense pyknotic nuclei are evenly distributed in the background of apparently viable larger tumor cells, admixed with mature lymphocytes and phagocytic macrophages. 2) small loose aggregates of cells with nuclear melding are indicative of small cell carcinoma rather than non-Hodgkin's lymphoma. 3) the cytoplasmic and nuclear fragments of tumor necrosis are more dominant in the smears of small cell carcinoma. 4) nuclear membrane and nucleoli are generally indistinct in small cell carcinoma due to condensation of chromatin.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.57-68
• /
• 2014

본 연구에서는 화산섬 제주의 해안지역에 산발적으로 분포하고 있는 모래들을 성인에 따라 세 개의 그룹으로 분류(규산염모래, 탄산염모래, 혼재된 모래)하여 그 특성을 정리하였다. 기본물성은 일반적인 모래의 비중에 비해 규산염모래는 다소 높고 탄산염모래는 낮은 값들을 포함하여 넓게 분포하며 전체적으로 비교적 입경이 큰 탄산염광물이 혼재되어 있어 분급이 불량하고 균등계수가 낮다. 구성성분에 따른 압축강도와의 관계는 규산염성분은 압축강도와 양의 상관을 보이고 탄산염성분은 음의 상관을 보여 서로 상반되는 경향을 보인다. 두성분의 비가 1:1을 기준으로 탄산염성분비가 작아지는 지역의 모래는 건설용 잔골재로 활용이 가능할 것으로 추정된다. 탄성계수 산정 시 압축강도의 2제곱근(ACI 308)과 3제곱근(KCI 2012)을 비교하기 위해 탄성계수를 무차원하여 검토하였다.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.241-252
• /
• 2021

An experimental program was conducted to investigate the fresh properties, mechanical properties and durability characteristics of the self-compacting mortars (SCM) produced with pumice powder and Artificial Lightweight Fine Aggregate (aLWFA). aLWFA was produced by using fly ash. A total of 16 different mixtures were designed with a constant water-binder ratio of 0.37, in which natural sands were partially replaced with aLWFA and pumice powder at different volume fractions of 5%, 10% and 15%. The artificial lightweight aggregates used in this study were manufactured through cold bonding pelletisation of 90% of class-F fly ash and 10% of Portland cement in a tilted pan with an ambient temperature and moisture content. Flowability tests were conducted on the fresh mortar mixtures beforehand, to determine the self-compacting characteristics on the basis of EFNARC. To determine the conformity of the fresh mortar characteristics with the standards, mini-slump and mini-V-funnel tests were carried out. Hardened state tests were conducted after 7, 28 and 56 days to determine the flexural strength and axial compressive strength respectively. Durability, sorptivity, permeability and density tests were conducted at the end of 28 days of curing time. The test results showed that the pumice powder replacement improved both the fresh state and the hardened state characteristics of the mortar and the optimum mixture ratio was determined as 15%, considering other studies in the literature. In the aLWFA mixtures used, the mechanical and durability characteristics of the modified compositions were very close to the control mixture. It is concluded in this study that mixtures with pumice powder replacement eliminated the negative effects of the aLWFA in the mortars and made a positive contribution.