• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• 대한전자공학회논문지
• /
• 제22권1호
• /
• pp.68-74
• /
• 1985

이 논문에서는 standard cell의 layout을 위한 doglegging을 하지 않는 channel 배선 시스템에 대하여 서술할 것이다. 이 시스템은 주어진 net list specification을 만족시키기 위하여, 각각 standard cell 의 직선 배열 결합인 두 row 사이의 구평 track에서 이층의 최종 배선 패턴을 만들어 준다. 이 논문에서 사용한 CMOS cell library는 9개의 기본 cell을 가지고 있으며, Mead-Cogway 방식에서의 A-2micron을 사용하여 CIF(Caltech Intermediate From) 형태로 표현되었다. Component library에는 각 cell 내의 pin들의 이름. 위치 및 layer type 등의 입출력 port 특성이 저장되어서, CROUT라는 channel routing program에서 입력 자료로 사용된다. 또 다른 program NETPLOT은 routing 결과를 개략적으로 도시하여 주며, NETCIF에서는 최종의 자세한 layout을 CIF file로 만들어 주고 있다. 기본 cell을 이온하여 set/reset이 있는 dynamic Raster-slave형 D flip-flop에 대한 channel routing의 경우 VAX l1/780 에서 4초의 CPU 시간이 소요되었다.

• 산업경영시스템학회지
• /
• 제39권3호
• /
• pp.83-89
• /
• 2016

The group formation problem of the machine and part is a critical issue in the planning stage of cellular manufacturing systems. The machine-part grouping with alternative process plans means to form machine-part groupings in which a part may be processed not only by a specific process but by many alternative processes. For this problem, this study presents an algorithm based on self organizing neural networks, so called SOM (Self Organizing feature Map). The SOM, a special type of neural networks is an intelligent tool for grouping machines and parts in group formation problem of the machine and part. SOM can learn from complex, multi-dimensional data and transform them into visually decipherable clusters. In the proposed algorithm, output layer in SOM network had been set as one-dimensional structure and the number of output node has been set sufficiently large in order to spread out the input vectors in the order of similarity. In the first stage of the proposed algorithm, SOM has been applied twice to form an initial machine-process group. In the second stage, grouping efficacy is considered to transform the initial machine-process group into a final machine-process group and a final machine-part group. The proposed algorithm was tested on well-known machine-part grouping problems with alternative process plans. The results of this computational study demonstrate the superiority of the proposed algorithm. The proposed algorithm can be easily applied to the group formation problem compared to other meta-heuristic based algorithms. In addition, it can be used to solve large-scale group formation problems.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.423-430
• /
• 2010

표면의 균열, 겹침결함, 금형의 코너반경이 작아 재료의 유동성이 낮을 때 발생하는 콜드셧, 부분충진등의 단조결함이 없는 자동차용 단조 플랜지를 생산하기 위해서 열전달, 단류선 흐름, 응력분포를 고려하여 형단조 공정과 금형에 대한 해석을 수행하였다. 축박기(up-set) 단조, 예비성형, 최종성형, 단조압력으로 구성된 단조과정은 유한요소법으로 해석되었다. 예비성형과 상하 금형의 높이비율이 단조공정과 금형에 미치는 영향을 평가하여 예비금형의 각 $10^{\circ}$와 최종 금형의 상하비율 1.5:1이 단조결함이 없는 결과를 나타내었다. 이를 반영한 새로 설계된 금형은 재료강도, 완전충진, 하중한계 13,000 KN 이라는 공정변수를 모두 만족시켰다. 이론 입증을 위해서 개선된 금형과 플랜지가 제작되었으며, 단조결함이 발견되지 않았다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.358-366
• /
• 2019

본 연구는 현재 작업자의 경험과 감각에만 의존하고있는 표면 마감작업시간 판정을 Durometer 측정치와 Proctor 관입저항 시험치를 비교하여 응결시간 판정에 듀로미터를 활용함으로써 실무 구조체의 과학적이고 정량적인 표면 마감시간의 추정 가능성을 분석하고자 하였다. 연구 결과로 Durometer 측정치와 Proctor 관입저항 시험치는 상관성이 높다고 판단되어 콘크리트의 경우 초결 측정시에는 Durometer C type으로 42HD전후 일 때 표면 마감작업 개시가능 시간결정에, 종결 측정시에는 Durometer D type으로 10HD 전후일때 표면마감 한계시간, 양생개시 시간 등에 유용하게 사용할 수 있을 것으로 사료되었다.

• Hip & pelvis
• /
• 제35권1호
• /
• pp.32-39
• /
• 2023

Purpose: A staged revision with placement of a temporary antibiotic-loaded cement spacer after removal of the implant is the "gold standard" for treatment of chronic prosthetic joint infection (PJI). It enables local delivery of antibiotics, maintenance of limb-length and mobility, easier reimplantation. However, bacterial colonization of spacers and mechanical complications can also occur. The aim of this study is to evaluate functional results and infection control in two-stage treatment of total hip arthroplasty (THA) PJI with and without a spacer. Materials and Methods: A retrospective review of 64 consecutive patients was conducted: 34 underwent two-stage revision using a cement spacer (group A), 30 underwent two-stage revision without a spacer (group B). At the final follow-up, functional evaluation of patients with a THA in site, without PJI recurrence, was performed using the Harris hip score (HHS). Measurement of limb-length and off-set discrepancies was performed using anteroposterior pelvic X-rays. Results: Most patients in group B were older with more comorbidities preoperatively. Thirty-three patients (97.1%) in group A underwent THA reimplantation versus 22 patients (73.3%) in group B (P<0.001). No significant differences in limb-length and off-set were observed. The results of functional evaluation performed during the final follow-up (mean, 41 months) showed better function in patients in group A (mean HHS, 76.3 vs. 55.9; P<0.001). Conclusion: The use of antibiotic-loaded cement spacer seems superior in terms of functional outcomes and reimplantation rate. Resection arthroplasty might be reserved as a first-stage procedure in patients who are unfit, who might benefit from a definitive procedure.

• 한국산림과학회지
• /
• 제109권4호
• /
• pp.468-476
• /
• 2020

본 연구는 굴참나무 임분밀도관리도 개발을 통해 맹아갱신림의 경영목표별 벌기령을 예측하고자 하였다. 분석에 활용된 표준지 조사자료는 분석용 자료 603개소와 검증용 자료 113개소로 분류하였고, 이를 이용하여 임분밀도관리도의 개발과 적합도 검증을 실시하였다. 임분밀도관리도 구성 모델의 설명력(R2)은 등평균수고곡선식 0.732, 등평균직경곡선식 0.990으로 분석되었다. 재적 생산 최대 벌기령을 분석한 결과, ha당 900본의 맹아 잔존 시 42~44년으로 나타났고, ha당 1,800본을 잔존한 경우 38~42년으로 분석되었다. 3등급재 원목을 생산목표로 설정하였을 때의 벌기령은 지위지수 16일 때 25~28년이 소요되었고, 지위지수 14는 29~33년이 소요되는 것으로 나타났다. 본 연구의 결과는 굴참나무 맹아갱신 임분의 경영계획 수립에 있어서 기초자료로 활용될 수 있을 것으로 판단된다.

• 디지털산업정보학회논문지
• /
• 제9권3호
• /
• pp.129-144
• /
• 2013

Recognizing a limits on quantitative evaluation of cultural contents' and for its betterment, study aims developing a qualitative evaluation model. For this study, Reception Theory, Semiotics and Psychology were derived for epistemological dimension to contemplate culture contents' essential attribute. To be concrete, cultural contents was examined as experiential products, emotional products, rememberable products and texts. Also, codes of fun, emotion and culture were discussed as intrinsic attributes for cultural contents and how those attributes were expressed or composed in cultural contents was discussed as well. Evaluation items were extracted based on final discussion at the epistemic level, set up the final evaluation model by taking experts' advices on each items. With all those outcomes, qualitative evaluation model for cultural contents was developed. For the importance of each index in the model, priority was granted by weighting on each index. Lastly, evaluation scale was developed for each index. The culture contents' evaluation model developed in study is meaningful not only in drawing qualitative evaluation items of video(image) contents and developing the index and model for the first time, but also its possibility of wide use for other genres.

• 대한가정학회지
• /
• 제49권1호
• /
• pp.55-65
• /
• 2011

This study explored how a 5th grade girl from a divorced family recovered her femininity through the sandplay therapy. The client was referred by a social worker in her school because of maladjustments such as passivity in school work, poor peer relations, especially with girls, the usage of bad language and a lack of concern about her appearance. There were 41 sessions of the therapy. The first part of the therapy included 1-7 sessions, the middle part 8-35, and the final part 36-41. The client expressed her situation by showing guardians and a peeing boy and by seeking love in the first part. During the middle part she put copper ballerinas and needed to make them alive. In the final part she set figures facing each other who seemed to have mutual understandings and placed cars running well. The client recovered her femininity through the sandplay therapy in a free and protected space.

• 소성∙가공
• /
• 제20권2호
• /
• pp.154-159
• /
• 2011

The roll die forming (RDF) process is a new manufacturing technique for producing gear parts such as clutch drum and clutch hub in automotive transmission. In the RDF process, the material is deformed by a roll installed on a die set. Excellent productivity, low forming load and improved dimensional accuracy have quantitatively been shown to be the benefits of the RDF. In this study, the RDF process is applied to manufacture a clutch hub with a gear shaped part. A finite element (FE) analysis was performed in order to investigate the material strain field and dimension of the final product. Based on the result of the FE analysis, a RDF experiment was performed and the dimensional accuracy of the final product was validated. This work demonstrates that RDF is a process capable of producing a sound clutch hub.