• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1178-1181
• /
• 2002

Records from a total of 202 crossbred pigs were classified by their ear type and coat color to examine the presence of interrelationships with growth performances. Crossbred pigs were F2 generations of full sib family out of ten Landrace sows bred by 5 Korean domestic boars. Heavily drooped ear type was predominant, 195 out of 202 pigs over the other two types (1 straight and 6 slightly drooped). Coat colors were classified as four categories, all white, all black, dominant white or dominant black. Ratio among coat color categories did not fall within Mendelian principle of independence regarding two loci involved. There was dependency between ear type and coat color. However, due to rarity of ear types other than heavy drooped, dependency comes from distribution of those rare ear types. Three least squares models to test the effect of ear type and coat colors on growth performances were analyzed. First model analyzed effects on birth weight, body weight at 3 and 6 weeks and ADG' before weaning and between 3 and 5 weeks of age. This model included sex in addition to ear type and coat color. Second model analyzed postweaning growth traits (initial weight, final weight and ADG between these periods) upon initiation of performance testing. This model included effects of sex, test group and start age (as a covariate) in addition. Third model was fit for fasted weight before slaughter and included the effects of sex, test group and age at slaughter (as a covariate). The effects of sex and ear type were not significant source of variation for all traits. Test group was a significant source of variation for all the postweaning traits. Effect of coat color was not significant until the initiation of performance testing and became significant then after. Least squares means of dominantly black pigs were significantly lower than the other three coat colored pigs in final weight around 195 days of age and in ADG from the start of performance test and final weight measure.

• Journal of Nutrition and Health
• /
• v.29 no.7
• /
• pp.689-702
• /
• 1996

The purpose of this experiment was to compare the effects of tryptophan administration on nutritional status of female rats which consumed reserpine and 6% casein diet with different carbohydrate contents(87%, 65%, 44% respective). Final body weight, body weight gain, FER, plasma amino acid concentration and microsomal cytochrome P 450 content in liver were measured and microscopic structure of hepatocytes was observed. In low-protein diet, the higher the carbohydrate content of diet was, the lower the damage was in the rat's liver. Tryptophan administration after dose of reserpine induced more effective recovery from liver damage of rats in high carbohydrate diet group than that in low carbohydrate diet group. In conclusion, the general nutritional assessments such as final body weight and body weight gain provided better estimate of the degree of structural changes in hepatocytes than functional assessment such as plasma amino acid concentration or liver microsomal cytochrome P450.

• Toxicological Research
• /
• v.27 no.3
• /
• pp.133-135
• /
• 2011

The FDA guidance focuses on the use of the NOAEL to establish the maximum recommended starting dose. The majority of NOAEL has been described inaccurately or incompletely in final reports for 90-days repeated dose toxicity test based on GLP (good laboratory practice) regulation. This is the most serious one of reasons for why most pharmaceutical companies targeting global markets have disregarded the final report produced from GLP facilities in Korea. The problems in deciding NOAEL reflected in the final reports are mainly due to the followings; 1) Inaccurate description or use of NOEL, NOAEL and LOAEL, 2) Insufficient and inappropriate interpretations in findings from toxicity test. This paper is intended to provide the insight into distinguishing NOAEL from NOEL and LOAEL, and into classifying findings from toxicity test. Here, the three step method is newly suggested by applying the weight-based classification to the NOEL, NOAEL and LOAEL based on the findings.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.345-349
• /
• 2005

A study was conducted to determine the effect of feeding chopped whole sugar cane compared to corn silage on performances of dairy cows during the dry season. Twenty four Holstein Friesian crossbred (>87.5% Holstein Friesian) lactating dairy cows in mid lactation; averaging 16.5${\pm}$2.0 kg of milk, 121${\pm}$22 days in milk, 54.5${\pm}$4.5 months old and 440${\pm}$31 kg live weight, were stratified for milk yield, days in milk, age, stage of lactation and body weight, and then randomly allocated to two treatment groups (12 cows in each group). The first group was fed corn silage together with commercial concentrate while the second group was fed chopped whole sugar cane together with commercial concentrate. All cows consumed similar DM, however, cows on corn silage consumed more CP while cows on chopped whole sugar cane consumed more $NE_{LP}$. No significant differences in performances between the two groups were observed except for final live weight and body weight change. Cows on chopped whole sugar cane showed higher final live weight and gained more weight than cows on corn silage. The present study clearly indicates that chopped whole sugar cane can be fed to lactating dairy cows, while giving similar milk yield to corn silage.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.39-51
• /
• 1994

When broiler litter was composted under the control of peak temperature of piles(uncontrolled, controled below $70^{\circ}C$ and below $60^{\circ}C$), changes of physical and chemical parameters were determined throughout the processing period. Broiler litter was composted in each of three $1.0{\times}1.0{\times}1.2m$ dimensional facilities for 8 weeks. After 5 to 6 weeks of composting, broiler litter was converted into the final compost with no ammonia odour, rice hull size of particle, and faint brown color. Central temperature of piles reached to the peak(about $69{\sim}70^{\circ}C$) within 3 to 4 days after composting and gradually decreased thereafter. The final product contained 26.5% of moisture, 9.0~9.1 of pH, and 14.0~14.3 of C/N ratio. The increase of C/N ratio with processing resulted from the considerable loss of N. The total wet weight of the final composts was an average of 38.3% of the initial weight, the dry weight of those 64.1%, and the organic matter weight of those 34.8%. Treatments of central temperature of composts did not affect changes of moisture, pH, C/N ratio, total wet weight, total dry weight, and total organic matter weight. In general, composted broiler litter was converted into the final product with little change in physical and chemical parameters after 5 to 6 weeks of processing. Nitrogen losses during the composting should be prevented for the improvement of the composting efficiency of broiler litter.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.11-17
• /
• 2008

Applicability of hyperbolic settlement prediction method to consolidation settlement in the dredged and reclaimed ground was assessed by analyzing results of centrifuge tests modelling self-weight consolidation of soft marine clay. From literature review about self-weight consolidation of soft marine clays located in southern coast in Korea, constitutive relationships of void ratio - effective stress - permeability and typical self-weight consolidation curves with time were obtained by analyzing centrifuge model experiments. For the condition of surcharge loading, exact solution of consolidation settlement curve obtained by using Terzaghi's consolidation theory was compared with results predicted by the hyperbolic method. It was found to have its own inherent error to predict final consolidation settlement. From results of analyzing thc self-weight consolidation with time by using this method, it predicted relatively well in error range of 0.04~18% for the case of showing the linearity in the relationship between T vs T/S in the stage of consolidation degree of 60~90 %. However, it overestimated the final settlement with large errors if those relation curves were nonlinear.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.92-99
• /
• 2001

This present study was aimed to investigate the characteristics of dissoloved organic matter (DOC) in sewage. The results are summarized as follows ; The plateaux reached in 3~4 days by the biodegradability test on sewage samples based on DOC. 쏭 rations of BDOC to DOC were 48, 21, 13 and 11% for raw sewage, primary treatment effluent, secondary treatment effluent and final treatment effluent, respectively. As the SUVA values ranged less 3L/m.mg for the effluent of sewage treatment plant, the DOC is composed largely of non-humic materials, hydrophilic, less aromatic as compared to waters with higher SUVA values. Through the biodegradability test, Dissolved organics showed that the quantity of LMW(Low Molecular Weight) less than 1,000 daltons was decreased, HMW(High Molecular Weight) more than 30,000 daltons had a tendency to increase. Large portion of UV$^{254}$ in final treatment effluent was increased of MMW(Medium Molecular Weight). Also, average removal efficiency of DOC was 32% during sewage treatment.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.246-252
• /
• 2018

Background Slim patients or those with large breasts may be ineligible for breast reconstruction with an abdominal flap, as the volume of the flap may be insufficient. This study aimed to establish that abdominal tissue-based breast reconstruction can be well suited for Korean patients, despite their thin body habitus. Methods A total of 252 patients who underwent postmastectomy breast reconstruction with an abdominal flap from October 2006 to May 2013 were retrospectively reviewed. The patients' age and body mass index were analyzed, and a correlation analysis was performed between the weight of the mastectomy specimen and that of the initial abdominal flap. Results The average weights of the mastectomy specimen and initial abdominal flap were 451.03 g and 644.95 g, respectively. The ratio of the weight of the mastectomy specimen to that of the initial flap was $0.71{\pm}0.23$. There was a strong positive linear relationship between the weight of the mastectomy specimen and that of the initial flap (Pearson correlation coefficient, 0.728). Thirty nulliparous patients had a final-to-initial flap weight ratio of $0.66{\pm}0.11$. The 25 patients who underwent a contralateral procedure had a ratio of $0.96{\pm}0.30$. The adjusted ratio of the final flap weight to the initial flap weight was $0.66{\pm}0.12$. Conclusions Breast weight had a strong positive relationship with abdominal flap weight in Koreans. Abdominal flaps provided sufficient soft tissue for breast reconstruction in most Korean patients, including nulliparous patients. However, when the mastectomy weight is estimated to be >700 g, a contralateral reduction procedure may be considered.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.135-141
• /
• 2008

Independent suspension axle and final reduction gear for special-purpose vehicles such as a armored vehicles are almost imported in Germany etc. so, developing them is necessary to save cost. In severe condition (open fields, water surface driving, obstacle pass), special-purpose vehicles must work well. Drop box, axle and final reduction gear performed static analysis. We know that is possible weight reduction. The purpose of this paper is to find out the optimal shape of final reduction gear's case by means of response surface methodology. The response surface method is the statistical method which can be applied to the non-sensitivity based optimization. The response surface which is constructed by the least square method contains only the polynomial terms so that the global maximum and minimum points are easily obtained.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.493-498
• /
• 2012

A wheel nut wrench is one of the hand tools used to loosen and tighten lug nuts on automobile wheels and it has generally a solid-type geometry for commercial vehicles. However, the solid-type wheel nut wrenches manufactured by hot forging processes exhibit several drawbacks such as heavy weight and rough surface finish. Thus, many efforts have been devoted to change the part geometry and improve the manufacturing process. For this purpose, the weight of the final product can be reduced drastically using a hollow tube as the initial stock, which can be manufactured by the more economical manufacturing process of cold forging. In this study, the cold forging of a hollow-type wheel nut wrench for commercial vehicles was designed based on the results of fundamental experiments and CAE analyses using the commercial finite element code DEFORM-3D. In addition, cold forging experiments were conducted on a special-purpose forming machine for hollow wheel nut wrenches in order to validate the designed process sequence. As results, it was found that the final products with a weight reduction of 39% and better surface appearance can be manufactured without any defect with the newly designed cold forging process.