• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Workshop
• /
• pp.57-68
• /
• 2004

A demonstrative operation of a membrane system with its caparity of 3,600m$^3$/d was carried out using reservoir water as raw water for the application of membrane filtration system to drinking water treatment. The operation was undertaken at a constant flux of 0.9 m$^3$/m$^2$/d for three months. Backwashing with NaClO of 3 ppm was allowed for 30 seconds every 20 minutes of filtration. Physical cleaning was introduced after 69 times of filtration/backwashing cycle with air-scrubbing and backwashing for 1 minute, and flushing for 2 minutes. In this study, water treatment performance was investigated compared with the existing rapid sand filtration process. The membrane system was operated with no significant problems during the test period. Higher water quality was obtained in the membrane filtration than in the rapid sand filtration in terms of particulate matters such as turbidity and microbes. Although the finished water of the membrane filtration contained slightly higher concentration in dissolved matters than that of the conventional one, it met the drinking water standard. The demonstrative operation showed that membrane filtration has a reliability in drinking water treatment. Researches should be needed on cost analysis through long-term operation and optimization of operation condition for further application.

• Structural Engineering and Mechanics
• /
• 제62권2호
• /
• pp.163-170
• /
• 2017

This study presents a particle-wall filtration model for predicting the particle motion behavior in a typical rotational flow field-filtration in blower system of cooker hood. Based on computational fluid dynamics model, air flow and particles has been simulated by Lagrangian-particle/ Eulerian-gas approaches and get verified by experiment data from a manufacturer. Airflow volume, particle diameter and local structure, which are related to the particle filtration has been studied. Results indicates that: (1) there exists an optimal airflow volume of $1243m^3/h$ related to the most appropriate filtration rate; (2) Diameter of particle is the significant property related to the filtration rate. Big size particles can represent the filtration performance of blower; (3) More than 86% grease particles are caught by impeller blades firstly, and then splashed onto the corresponding location of worm box internal wall. These results would help to study the micro-particle motion behavior and evaluate the filtration rate and structure design of blower.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.571-583
• /
• 2020

Permeation grouting is of great significance for consolidating geo-materials without disturbing the original geo-structure. To dip into the filtration-induced pressure increment that dominates the grout penetration in permeation grouting, nonlinear filtration coefficients embedded in a convection-filtration model were proposed, in which the volume of cement particles in grout and the deposited particles of skeleton were considered. An experiment was designed to determine the filtration coefficients and verify the model. The filtration coefficients deduced from experimental data were used in simulation, and the modelling results matched well with the experimental ones. The pressure drop revealed in experiments and captured in modelling demonstrated that the surge of inflow pressure lagged behind the stoppage of flow channels. In addition, both the consideration of the particles loss in liquid grout and the number of filtrated particles on pore walls presented an ideal trend in filtration rate, in which the filtration rate first rose rapidly and then reached to a steady plateau. Finally, this observed pressure drop was extended to the grouting design which alters the water to cement (W/C) ratio so as to alleviate the filtration effect. This study offers a novel insight into the filtration behaviour and has a practical meaning to extend penetration distance.

• 한국축산시설환경학회지
• /
• 제19권1호
• /
• pp.39-46
• /
• 2013

This study was carried out to compare the filtration effect of anaerobic digestion waste water by compost filtration bed. Three types of filtration systems were set for filtration test following to composition of bedding materials. Two filtration systems were filled with sawdust, rice-hull and wood-chip. And the other was filled with sawdust and rice-hull. Anaerobic digestion waste water was applied evenly on the surface of the filtration bed with spraying nozzle. The concentration of nitrogen, biochemical oxygen demand (BOD), suspended solids (SS) of anaerobic digestion waste water was decreased by filtration treatment. The total nitrogen content was decreased from 1,313 mg/L to 1,090~1,293 mg/L and BOD concentration was decreased from 529.7 mg/L to 125~162.3 mg/L, respectively. The SS content was decreased from 69~79% by filtration process. In addition, the electrical conductivity (EC) was decreased from 10.22 ds/m to 7.91~8.31 ds/m.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.535-544
• /
• 2012

수평 여과매체를 사용한 케이크 여과에서는 침전이 수반된다. 이 침전 현상을 고려하지 않을 경우 여과기간의 케이크 평균비저항 값이 두 배 이상까지도 잘못 측정될 수 있다. 저자의 전번 논문에서는 여과기간에 침전으로 인해 케이크에 들어가는 현탁액의 고체분율이 변화한다는 것을 이론적으로 주장하였으나, 그 변화가 어느 정도인지를 알아내지 못하였다. 이 논문에서는 먼저 여과-투과 실험방법에 대한 분석에서 투과기간에 측정된 케이크 평균비저항 값이 옳다는 것을 여러 방법으로 증명하고, 여과기간에 통상적인 방법으로 측정된 평균비저항 값은 여과가 진행되는 순간의 현탁액의 고체분율 대신 초기 고체분율을 사용하므로 정확하지 못하다는 것을 입증하였다. 여과와 투과에서 측정된 실험값을 사용하여, 여과 진행 동안 침전에 의해 변화한 현탁액의 고체분율을 계산하였다. 그 후 여과 진행 동안 측정한 현탁액의 높이 변화 값과 이 논문에서 새로 만든 수식을 사용하여 여과 진행 중의 현탁액 고체분율을 결정하였다. 두 가지 방법으로 결정된 현탁액의 고체분율을 비교하여 두 가지가 거의 일치함을 입증하였다.

• 한국환경보건학회지
• /
• 제22권1호
• /
• pp.12-20
• /
• 1996

This study was carried out to investigate the change of average .specific resistance according to suspension concentration for study phenomena occurring during filtration period. As the results of this study, the following conclusions were obtained. The average specific resistance in 1% $CaCO_3$ suspension was showed power function(R=0.99), whereas in TOYO 5C and TOYO 5A paper were made little difference under high pressure. It represented from results that filtration theory in concord with cake filtration was no affected the average specific resistance of filter medium in cake filtration. In case of 0.1% $CaCO_3$ suspension filtration, the TOYO 5C was showed power function, whereas in TOYO 5A paper differently. In the present study, the $P_1$ value was calculated from the average specific resistance by filtration method. Therefore, $P_1$ value were $1.68\times 10^4Pa$, $4.05\times 10^3Pa$, and $3.15\times 10^3Pa$ in $5.3\times 10^4Pa$, $1.3\times 10^4Pa$, and $8.2\times 10^3Pa$, respectively. We concluded that propriety of new filtration theory was also proved.

• 상하수도학회지
• /
• 제14권3호
• /
• pp.260-270
• /
• 2000

The objective of this study is to evaluate the effect of filter aids in the dual-media rapid filtration. Paper-filter tests were conducted to determine the proper dosages of coagulant and filter aid, and pilot plant tests using two dual-media filter columns were performed for a variety of filtration rates. Using a filter aid (non-ionic polymer), the maximum feasible filtration rate is 480m/day, while turbidity is less than 0.3 NTU and filter run-time is about 70 hours. It is possible to increase the filtration rate up to 360 m/day for keeping the turbidity less than 0.1 NTU. Turbidity increases for the filtration rate greater than 360m/day. In general, the quality of filtered water with a filter aid is stable, while the filter maintains a sufficient filter run-time for a maximum allowable head loss. Particularly, the initial breakthrough can be effectively controlled. The use of a filter aid may be one of the methods applicable if the turbidity of filtered water is required to be improved or if the filter breakthrough limits filter run-time.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.231-236
• /
• 2010

A compressible media filtration process with synthetic fiber media was studied for combined sewer overflows (CSOs) treatment. Since the operation performance of fiber media filtration was dependent on the pattern of CSOs, the flow rate of CSOs was investigated and it was characterized by a big fluctuation. Thus, in this study, the fiber media filtration process was tested with wide range of filtration velocity. The removal efficiency was proportion to the increase in compressibility. As the filtration velocity was increased, the treatment efficiency was decreased and consequently leveled off when the velocity exceeded 750 $m^3/m^2$/d. An exponential equation was introduced to express the relationship between the removal efficiency and up-flow velocity. At columm test, six repetition of filtration and backwash cycle did not after the filtering velocity under the constant pressure condition.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.99-108
• /
• 2014

Liquid filtration by membrane filters is essential for the preparation of ultrapure water in semiconductor manufacturing processes. The separation of submicrometer particles suspended in ultrapure water with a laminated fibrous membrane filter was studied numerically and experimentally in the present work. We found that an electrical double layer around a single fiber expanded to a large extent at a low ion concentration, as in ultrapure water, and deformed toward the upstream of the fiber with increasing filtration velocity. Since an increase in the electrical double-layer thickness leads to a decrease in the electrical potential gradient, particles with the same polarity as the fiber approach the fiber more easily and are captured at a high filtration velocity. Experimental results also confirmed that the collection efficiency of polystyrene latex(PSL) particles through a PTFE filter became higher as the filtration velocity increased.

• 한국임상수의학회지
• /
• 제32권1호
• /
• pp.45-48
• /
• 2015

돼지의 희석정액을 glass wool filtration 한 후 양질의 정자를 선별하고자 실시하였다. 돼지의 정액을 채취한 후 glass wool 높이와 시간에 따른 정자의 농도, 기형율, 생존율, 그리고 운동성을 조사하였다. Glass wool 여과 후 정자의 농도는 줄었으나, 정상 정자비율과 생존율은 상승하였고, 운동성의 변화는 나타나지 않았다. 이상의 결과들을 통해 돼지 정자의 glass wool 여과는 상대적으로 낮은 기형율과 높은 생존율을 가진 정자를 얻을 수 있는 방법임을 알 수 있었다.