• 한국물환경학회지
• /
• 제18권2호
• /
• pp.221-228
• /
• 2002

Abundant growth of algae in raw water sources caused by eutrophication brings about significant side effects on water supply, such as taste and order problem, oxygen depletion, toxic material secretion, and filter clogging problem in water treatment process, etc. The purpose of this research is to remove the algae and phosphorus compounds in the Pal-dang reservoir promptly by using the upflow filtration system with coagulant addition. The filter tower consisted of sand media and sieve filter with air back-washing process. By using coagulation and filtration with $132{\mu}m$ pore size filter, about 55% and 70% of algae and phosphorus compounds were removed respectively. The experimental conditions were as follows; head loss of 0.2m, linear velocity of 200m/day, and filtration flux of 1000($L/m^2/day$). In the case of filtration with cartridge type filter of $25{\mu}m$ pore size, the filtration flux was about 7800 LMH, and the removal ratios of COD, SS, T-P, and Chlo-a. were 61%, 99%, 54%, and 98%, respectively. However, high pressure air back-washing process with should be required for the maintenance of such high filtration flux.

• 에너지공학
• /
• 제7권1호
• /
• pp.103-112
• /
• 1998

산업용 직물여과포의 운전에서 발견되는 다양한 문제점들을 해결하기 위한 일환으로 내열성여과포를 개발하여 성능을 규명하였다. 국내 산업체에서 배출되는 대표적인 네 종류의 먼지들, 즉 제철공정의 코크먼지, 시멘트 제조업체의 시멘트 먼지, 유동층 연소로의 비산회재, 그리고 폐플라스틱 소각로의 연소재에 대하여 여과포의 성능을 시험하였다. 내열성여과포의 물리화학적 특성은 평균 세공흐름압력 및 기포점 세공지름, 평균흐름 세공지름, 세공크기분포, SO2 및 NO2 분위기에서의 물성변화의 항목으로 평가 되었다. 또한, 벤치규모의 필터시험장치에서 직물여과포에 대한 압력손실, 먼지 통과율, 여과포 성능 평가지수를 조사하였다. 본 연구에서 개발된 직물여과포는 양호한 물리화학적 필터 특성을 지니고 있으며 전형적인 산업체 먼지를 처리하는데 적합하였다.

• 멤브레인
• /
• 제19권1호
• /
• pp.47-53
• /
• 2009

본 연구의 목적은 금속 중공사형 필터에 무기 입자를 코팅하여 금속/세라믹 복합 한외여과막을 제조하는 것이다. 직경이 2.0 mm이며 기공 크기가 $2{\sim}8{\mu}m$ 범위를 갖는 니켈 중공사 필터에 급냉건조법과 침지-건조법으로 실리카 졸과 티타니아 졸을 코팅하여 금속쎄라믹 복합 한외여과막을 제조하였다. SEM과 PMI 결과로부터 기공 크기가 50 nm 수준을 갖는 것을 확인하였다. 기공 크기는 입자 크기, 소성시간 및 온도에 따라 차이를 보였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.191-197
• /
• 2008

In this study, as a fuel filter for automobiles, base paper which can filtrate the polluted particles must satisfy with the standards of each vehicle. and a filter of impregnation paper made that combining the base paper with the resin. Therefore, They were wanted to found out the factors that affect base paper and impregnation paper according to content of HPZ, Mulberry pulp(MP), Laub holze bleached kraft pulp(LBKP). The most important things we wanted to find out in base paper and impregnation paper test were weight, thickness, air permeability, burst and tensile strength, maximum pore size and mean pore size, stiffness. we wanted to measure a rate of change of these condition by adjusting a rate of mixing for HPZ, MP and LBKP. Moreover, It suited for an impregnation paper mixed with a rate of mulberry pulp 20%, HPZ 40% and LBKP 40%. Used resins in this study was Phenol, Acryl, PVAc. And as every resins, sample was divided into existence and nothing of embossing. as a fuel filter for automobiles, It was appeared that the suitable condition of base paper was a rate of mixing for HPZ(40%), MP(20%) and LBKP(40%).

• 에너지공학
• /
• 제7권1호
• /
• pp.57-64
• /
• 1998

폴리에스터와 스테인레스스틸섬유를 재료로 제조된 제전사여과포에 대한 물리화학적 특성시험 및 여과포성능 기초시험을 수행하였다. 실험용먼지로 제철.제강, 시멘트제조, 열공급시설 및 폐기물공정에서 채취된 먼지를 처리하여 사용하였다. 제전사여과포의 물리화학적 특성 실험에서는 산성분위기하에서 인장강도 및 초기탄성계수변화를 조사하였고, Automated Permporometer를 이용하여 평균흐름세공압력, 기포점 세공지름, 평균흐름세공지름 및 세공크기분포를 구하였다. 또한 벤처규모의 여과포 기초성능 시험장치를 이용하여 먼지부하에 따른 압력손실, 먼지통과율 및 여과포성능 평가지표를 산출하였다. 산성가스 및 분위기하에서 제전사여과포의 인장강도는 온도 및 노출시간과 깊은 관련이 있었다. 압력손실은 여과속도와 먼지부하가 증가함에 따라 증가하였으며 증가형태는 먼지의 종류에 따라 달랐다. 먼지 통과율은 먼지종류에 관계없이 먼지부하의 증가에 따라 급격히 감소하는 경향을 나타내었다. 여과포성능지표는 먼지 포집 초기에는 증가했다가 급격히 감소하여 일정하게 유지되었다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.

• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.132-137
• /
• 2008

The main purpose of this study is enhancing the filtering efficiency, performance and durability of filter by growing SiC whiskers on cordierite honeycomb substrate. The experiment was performed by Chemical Vapor Infiltration (CVI) in order to control pore morphology of substrate. Increasing the mechanical strength of porous substrate is one of important issues. The formation of "networking structure" in the pore of porous substrate increased mechanical strength. The high pressure gas injection to the specimen showed that a little of whiskers were separated from substrate but additional film coating enhanced the stability of whisker at high pressure gas injection. Particle trap test was performed. More nano-particle was trapped by whisker growth at the pore of substrate. Therefore it is expected that the porous cordierite which deposited the SiC whisker will be the promising material for the application as filter trapping the nano-particles.

• 한국수산과학회지
• /
• 제31권6호
• /
• pp.914-919
• /
• 1998

육상 수조식 양식장의 유입수에 망목 60$\mu$m 스크린필터 및 조사량 0.5 mWS/$cm^2$ 자외선등, 배출수에 망목 90 $\mu$m 드럼필터를 설치$\cdot$운행하여 어류사육수조의 유입수와 배출수의 정화효과를 검토하였다. 유입 수에 60$\mu$m 스크린필터와 조사량 0.5 mWS/$cm^2$의 UV, 배출수에 90 $\mu$m 드럼필터의 설치$\cdot$운행에 따른 수온, 염분, $NO_3-N,\;NO_2-N,\;NH_4-N,\;PO_4-P$, DO 및 COD에 대한 정화효과는 인정되지 않았다. 그러나, 유입수에 60$\mu$m스크린필터의 설치$\cdot$운행에 의한 부유물질과 탁도는 각각 $48.7\~65.6\%$ (평균, $52.8\%$), $33.3\~42.5\%$ (평균, $35.9\%$)가 제거되었고, 조사량 0.5 mWS/$cm^2$의 UV의 설치$\cdot$운행에 따른 세균 및 비브리오 균수는 각각 $16.7\~20.2\%$ (평균, $19.2\%$), $20.0\~21.9\%$ (평균, $20.9\%$)가 살균되었다. 또한, 배출수에 90 $\mu$m 드럼필터의 설치에 따라 부유물질은 $42.7\~52.6\%$ (평균 $46.9\%$), 탁도는 $27.7\~29.9\%$ (평균 $28.3\%$)의 제거효율을 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.406-410
• /
• 2002

A new spin filter consisting of $50{\mu}m$ (nominal pore size) depth fitters rolled on a stainless steel grid was developed, using Saccharomyces cerevisiae as a model suspension cell to evaluate the spin filter performance. In a 1.8-1 fermentor with a rotation speed of 300 rpm and perfusion rate of 4 ml/min, a cell concentration of 49 g/l and ethanol concentration of 45 g/l from 100 g/l glucose could be obtained in a perfusion culture. The major mechanisms for cell separation used by the large-pore spin filter appeared to be centrifugal force and pivotal movement of the cells in the spin filter.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.21-27
• /
• 2014

In this study, diatomite based materials were investigated as a support filter for silica particle coating. The silica sol for coating was synthesized by a st$\ddot{o}$ber process. The diatomite support was dry-pressed at 10 MPa and sintered at $1200^{\circ}C$ for 1 hour. The coating sol was prepared as a mixture of EtOH and silica sol. The diatomite support was coated by a dip-coating process. Silica coated diatomite filter was sintered at $1000{\sim}1200^{\circ}C$ for 1 hour. The largest pore size was decreased with increasing concentration ratio of coating sol. The gas and water permeability of silica coated diatomite decreased with increasing of concentration ratio of the coating sol.