• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.634-637
• /
• 1999

The amorphous vanadium oxide as a cathode material is very preferable for fabricating high performance micro-battery. The amorphous vanadium oxide cathode is preferred over the crystalline form because three times more lithium ions can be inserted into the amorphous cathode, thus making a battery that has a higher capacity. The electrochemical properties of sputtered films are strongly dependent on the oxygen partial pressure in the sputtering gas. The effect of different oxygen partial pressure on the electrochemical properties of vanadium oxide thin films formed by r.f. reactive sputtering deposition were investigated. The stoichiometry of the as-deposited films were investigated by Auger electro spectroscopy. X-ray diffraction and atomic force microscopy measurements were carried out to investigate structural properties and surface morphology, respectively. For high oxygen partial pressure(>30% ), the films were polycrystalline V$_2$O$_{5}$ while an amorphous vanadium oxide was obtained at the lower oxygen partial pressure(< 15%). Half-cell tests were conducted to investigate the electrochemical properties of the vanadium oxide film cathode. The cell capacity was about 60 $\mu$ Ah/$\textrm{cm}^2$ m after 200 cycle when oxygen partial pressure was 20%. These results suggested that the capacity of the thin film battery based on vanadium oxide cathode was strongly depends on crystallinity.y.

• 영미문화
• /
• 제10권2호
• /
• pp.29-48
• /
• 2010

This paper is a kind of interdisciplinary studies which connect a Western film criticism with a criticism of minority literature in America. My purpose in this paper is to put on the table such a sensitive issue as racial representation and representativeness in Clint Eastwood's revisionist Western, Unforgiven. We admit generally that Western films have contributed to the white American myth-making of how the West was won. Yet, since the mid-1960s, a growing number of revisionist Westerns were produced so as to raise a question about the conventional way of looking at what happened in the American West. In order to analyze the problem inherent in the way of seeing, I pay attention to how the director Eastwood (re)presents a character named W. W. Beauchamp in the film. Presumably, what the character Beauchamp misses in the West can be overlapped with what ordinary film viewers miss in the genre of Westerns. Given this, interrogating both what Beauchamp sees and what he misses within the movie, I attempt to disclose how much of the West has been unseen from his biased viewpoint. By doing so, I argue why it is important to focus on some passing scenes that touch on the irony of a Native American train passenger, the gaze of the mute Native American housewife, the abrupt disappearance of Asian American men, the lynching of African-American ex-cowboy, and the self-determination of the saloon prostitutes. Then I hope that, conservative and mainstream though the director is, his way of revising the Western is not quite far from my minority-conscious critical position.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.507-513
• /
• 2022

본 연구는 영화 산업에서 온라인 시장인 IPTV의 VOD 이용 건수 예측 모델을 개발하였다. 한국영화진흥위원회에서 수집한 2017년부터 2021년까지 VOD 이용건수 데이터를 활용하여 머신러닝 기반 예측모델을 구축했다. 문헌조사와 군집분석을 통하여 오프라인 시장과 온라인 시장의 차이를 밝히고, VOD 이용 건수의 새로운 범주를 제안한다. 머신러닝 기반의 VOD 이용 건수 예측 모델 개발을 통해 IPTV 기업들의 의사결정 지원 뿐 아니라 마케팅 전략 수립을 돕는 것을 목적으로 한다.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.152-170
• /
• 2023

Although ugliness had long been considered a negative form of beauty, it has become an independent aesthetic category. However, most previous art studies have focused on Rosenkranz's theory, making its application to contemporary fashion analysis challenging. Therefore, it is necessary to redefine ugliness. This study highlighted four modern ugliness categories from a modern perspective following the examination of the historical considerations of the ugliness concept, namely ugliness as a violation of taboo, ugliness as an unpleasant emotion, ugliness as a vulgar taste, and ugliness as an ethical flaw. From this perspective, SHOWstudios for fashion films were analyzed in the present study. The results of our analysis showed that ugliness in the film was related to socially sensitive subjects and stimulating images. Whereas costumes in the film were used as a tool to convey the subject and to enhance the visual effect of the image. In addition, clothing was identified as a core subject element of the video, particularly when considering ugliness as an ethical defect. This study provides further insights into contemporary fashion analysis, expanding the ugliness perspective, which had been limited to the specific perspectives of scholars.

• 한국초지조사료학회지
• /
• 제16권1호
• /
• pp.87-92
• /
• 1996

The quality of silages, made from whole crop barley, rye, spring oat, Italian ryeglass, orchardgrass, alfalfa and grass-legume pasture mixtures, were evaluated under two different conservation techniques in baled silage making (BS) and conventional silages(CS). Crops materials were harvested at the stage of the greatest dry matter accumulation(hard dough for barley, soft dough for rye and oat, late bloom for Italian ryegrass and others pasture species), and baled in a self constructed square baling chamber weighted by 25~30kg in dry matter basis. Each bales were wrapped with 0.05mm thick polyethylen plastic film and stored six months long in stack silos. Barley, rye, oat and Italian ryegrass including of pasture crops produced higher quality silages in the baled silage making, due to better organic acid fermentation and lower nutrient losses during the period of storage than those in the conventional silages. TDN contents of barley silages were 65.3% in BS and 63.7% in CS, NEL value of barley silages was improved hum 6.48MJ(CS) to 6.61MJ/kg(BS) in dry matter basis. Silage quality of rye, oat and pasture crops were also improved markedly in the baled silage utilization.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.59-69
• /
• 1997

이트리움 실리사이드($YSi_2$)는 $400^{\circ}C$ 이상의 진공열처리 중 고상반응에 의하여 (100)Si 기판상에서 $YSi_2$의 (1100)면이 방향성 성장을 하였으며, $YSi_2$ 박막과 (100)Si 기판과의 방위관계는 [0001]$YSi_2$//[011i]Si과 [0001]$YSi_2$//[011]Si이었다. 그러나 방위관계에서도 알 수 있는 바와 같이 $YSi_2$는 [1100]$YSi_2$의 domain이 상호간에 $90^{\circ}$의 방위각을 이루며 성장하는 이른바 double-domain 구조를 나타내었다. 이는(1100)$YSi_2$면과 Si기판과의 계면에서 커다란 격자 불일치의 이방성 때문이라 생각되며, 각각의 domain은 (2201) 비대칭 반사면의 $\omega$-mode rocking curve 측정 결과, 거의 동등한 체적율과 결정성을 나타내었다. 본 연구에서는 이러한 double-domain의 형성기구를 (1100)$YSi_2$면과 (100)Si기판과의 계면에서 정합 모델에 근거한 기하학적 matching 관계로 설명하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.56-59
• /
• 2011

The characterization of the chemical mechanical polishing (CMP) process for undensified phophosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been used by experimenters to understand the relationship between the input variables and responses of interest in a simple and efficient way, and it typically is beneficial for determining the appropriatesize of experiments with multiple process variables and making statistical inferences for the responses of interest. The equipment controllable parameters used to operate the machine consist of the down force of the wafer carrier, pressure on the back side wafer, table and spindle speeds (SS), slurry flow (SF) rate, pad condition, etc. None of these are independent ofeach other and, thus, the interaction between the parameters also needs to be understoodfor improved process characterization in CMP. In this study, we selected the five controllable equipment parameters the most recommendedby process engineers, viz. the down force (DF), back pressure (BP), table speed (TS), SS, and SF, for the characterization of the CMP process with respect to the material removal rate and film uniformity in percentage terms. The polished material is undensified PSG which is widely used for the plananization of multi-layered metal interconnects. By statistical modeling and the analysis of the metrology data acquired from a series of $2^{5-1}$ fractional factorial designs with two center points, we showed that the DF, BP and TS have the greatest effect on both the removal rate and film uniformity, as expected. It is revealed that the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that process control based on a better understanding of the process is the key to success in current semiconductor manufacturing, in which the size of the wafer is approaching 300 mm and is scheduled to continuously increase up to 450 mm in or slightly after 2012.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.115-118
• /
• 2011

Process characterization of the chemical mechanical polishing (CMP) process for undensified phosphosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been addressed to experimenters to understand the relationship between input variables and responses of interest in a simple and efficient way. It is typically beneficial for determining the adequate size of experiments with multiple process variables and making statistical inferences for the responses of interests. Equipment controllable parameters to operate the machine include the down force (DF) of the wafer carrier, pressure on the backside of the wafer, table and spindle speed (SS), slurry flow rate, and pad condition. None of them is independent; thus, the interaction between parameters also needs to be indicated to improve process characterization in CMP. In this paper, we have selected the five controllable equipment parameters, such as DF, back pressure (BP), table speed (TS), SS, and slurry flow (SF), most process engineers recommend to characterize the CMP process with respect to material removal rate (RR) and film uniformity as a percentage. The polished material is undensified PSG. PSG is widely used for the plananization in multi-layered metal interconnects. We identify the main effect of DF, BP, and TS on both RR and film uniformity, as expected, by the statistical modeling and analysis on the metrology data acquired from a series of $2^{5-1}$ fractional factorial design with two center points. This revealed the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that the process control based on better understanding of the process is the key to success in semiconductor manufacturing, typically when the wafer size reaches 300 mm and is continuously scheduled to expand up to 450 mm in or little after 2012.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.73-79
• /
• 1995

A simple conservation technique baled silage making of selected froage materials was discussed in Suwon and in Muan county during 1991 - 1992. Eleven species of forage crops and pasture grasses(maize. sorghum, pearl millet, barnyardgrass, rye, barley, spring oat, Italian ryegrass, orchardgrass, alfalfa and grass-legume pasture mixtures) were harvested at different growth stage from young plant to maturity and baled in a self constructed square baling chamber, and wrapped in a 0.05mm thick polyethylene plastic film. Each bales measured by 90cm long, 60cm wide and 50cm height and weighted between 15~20kg in dry matter basis. physio-molphologcal characteristics of the plants, leaf weight ratio(LWR), leaf area ratio(LAR), stalk ratio (SR), stalk hardness(SH) and other growth parameters, were analysed and were used as a parameter to evaluate the suitability of materials for baling. Italian ryegrass including orchardgrass, alfalfa and pasture mixtures produced high quality baled silage. Silage quality point(F1ieg-point) of Italian ryegrass was improved from 63 point in crushed custom silage to 75 piont in baled silage. Meterial of grass-legume pasture mixtures showed 55 point in crushed silage and 67 point in baled silage. Fodder rye, barley, spring oat and barnyardgrass were also evaluated as a good materials for baled silage making. On the other hand, meize including sorghum and peral millet were evaluated as a not suitable materals for baling due to its high value of SR and SH. Quality of maize was excellent with 88 point in clushed silage and medium with 47 point in baled silage making.