• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.156-163
• /
• 2008

We proposed a new $p^+/n^+$ gate locally-separated-channel (LSC) bulk FinFET which has vertically formed oxide region in the center of fin body, and device characteristics were optimized and compared with that of normal channel (NC) FinFET. Key device characteristics were investigated by changing length of $n^+$ poly-Si gate ($L_s$), the material filling the trench, and the width and length of the trench at a given gate length ($L_g$). Using 3-dimensional simulations, we confirmed that short-channel effects were properly suppressed although the fin width was the same as that of NC device. The LSC device having the trench non-overlapped with the source/drain diffusion region showed excellent $I_{off}$ suitable for sub-50 nm DRAM cell transistors. Design of the LSC devices were performed to get reasonable $L_s/L_g$ and channel fin width ($W_{cfin}$) at given $L_gs$ of 30 nm, 40 nm, and 50 nm.

• 자원환경지질
• /
• 제28권1호
• /
• pp.1-8
• /
• 1995

The smectite-rich clays were found locally in Paleozoic calcareous sedimentary rocks in the Samcheok area. Their occurrences were investigated in detail, and the physico-chemical properties of the clays were also determined by X-ray diffraction, chemical analysis, thermal analysis and cation exchanging experiment. The smectite clays occur as the fissure filling dyke developed in calcareous sedimentary rock and as alteration products of intrusive rhyolite. Most of clays occur at the contact between the sedimentary rock and the rhyolite, and the alteration zone was observed only in rhyolite body close to the contact. Judging from their occurrences, it is believed that the smectite-rich clays in this area were formed by the hydrothemal alteration. The smectite clays from the area are mainly composed of Ca-montmorillonite, and associated with small quantities of quartz, opal-CT and feldspar. The montmorillonites from this area are lower in Fe content, and higher in exchangeable Ca ion, compared to those of bentonite from the Yangnam-Yeongil area.

• 한국게임학회 논문지
• /
• 제10권5호
• /
• pp.103-113
• /
• 2010

본 논문은 얼굴의 표정과 몸 동작을 광학식 동작 포착장비를 활용하여 동시에 포착하는 경우에 있어 얼굴 부위 마커들에 대한 노이즈에 강건한 데이터 처리 방법에 대해 다룬다. 일반적인 얼굴 표정만 포착하는 경우와 달리, 몸의 움직임과 동시에 포착할 경우 포착용 카메라가 멀리 있어 얼굴에 붙인 마커들의 궤적 데이터는 특별한 처리를 요한다. 특히 궤적의 표식화, 빈 곳 메우기, 노이즈 제거의 과정이 필수적이며, 이러한 과정을 위해 본 논문에서는 지역좌표에 기반을 둔 궤적 데이터 처리 방법을 제안한다. 지역 좌표는 강체변형에 불변한 특징이 있으며, 얼굴모양의 국지적인 변화를 의미하여, 궤적 데이터처리에 효과적으로 활용 될 수 있음을 보였다. 또한 제안한 방법을 활용하여 애니메이션을 제작해 실제 제작 환경에 적용 가능함을 보였다.

• Journal of Korean Neurosurgical Society
• /
• 제38권5호
• /
• pp.350-354
• /
• 2005

Objective : The aim of this study is to assess the immediate and long-term efficacy of percutaneous vertebroplasty for treating painful vertebral osteoporotic fractures. Methods : A retrospective review of 149patients who had undergone 167 vertebroplasty procedures for osteoporotic fractures was performed. Clinical, radiologic, and procedural datas were analyzed as parameters of prognostic significance, including age, sex, bone marrow density score, symptom duration, bone cement filling grade, number of fractured vertebrae, compression grade of vertebrae, leakage of bone cement, volume of bone cement injected and complications. Results : In 158 of the 167 procedures assessed, immediate pain relief was obtained [94.6%]. The extent of collapse of the vertebral body was assessed as a parameter for prognostic significance [p=0.015]. Three months postoperatively, no improvement of the pain was observed in four of the 167 procedures that had undergone the vertebroplasty [2%]. At long-term follow-up, the improvement of pain was not correlated with the compression grade of vertebrae [p=0.420]. Conclusion : The immediate outcome of vertebroplasty are less effective in vertebrae more collapsed.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• International Journal of Costume and Fashion
• /
• 제9권1호
• /
• pp.34-43
• /
• 2009

This study compared the thermal comfort of indoor clothing from Tencel material that is getting higher in demand due to being eco-friendly with superior wettability, with that from Polyester material that despite being most widely used for indoor clothing, rapidly discharges body sweat due to low wettability. The experiments were performed in the two manners, objective evaluation under the conditions of an artificial climate chamber and subjective evaluation of wearing the given clothes at home followed by filling in the questionnaire. Subjects were 8 healthy elderly women in their 60's who spend majority of their time at home rather than in social activities, and comparison was made on skin temperature and humidity inside clothing at exercise and relaxation states under early summer environment. Based on these results, wearing Tencel material clothing maintained cooler temperatures under warm environment rather than when wearing Polyester material clothing, thus enabling activities under more comfortable state. Regarding humidity inside clothing, parts with twofold clothing did not show difference between Tencel and Polyester, but the onefold arm showed lower when wearing Tencel. With this results, Tencel is regarded as more comfortable and nicer than Polyester.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.476-480
• /
• 2010

철도차량의 바닥재에 널리 사용되는 주름 강판은 국부공진 효과에 의하여 특정 주파수 대역에서의 차음성능이 심각하게 저하된다. 그 대책으로, 본 연구에서는 우레탄 폼재를 주름내부에 충진시키거나 유리면층을 바닥재에 적층시킨 후, 차음성능의 향상효과를 실험적으로 평가한다. 주름강판 및 바닥 적층재를 대상으로 ASTM E2249-02에 근거하여 인텐시티 투과손실을 측정하고 평가한다. 본 연구의 목적은 폼 충진이나 유리면 적층이 중량 증가 측면에서 열차 차체의 차음성능을 어느 정도 향상시키는가를 규명하는 데에 있다.

• 대한간호학회지
• /
• 제38권6호
• /
• pp.802-812
• /
• 2008

Purpose: The purpose of this study was to identify and describe phenomenological structures of the lived experience of struggling against an illness for patients with Amyotrophic Lateral Sclerosis (ALS). Methods: The participants were 7 patients with ALS recruited by snowball sampling who agreed to participate in this research and could verbally communicated with the researcher. Data were collected by long term-repeated interviews with participants in their own homes. Data were analyzed using Colaizzi's method of phenomenology. Results: Four categories were extracted as follows: 'Being seized with fear of death', 'Living a marginal life', 'Accepting hard fate', and 'Clinging to faint life'. Seven theme clusters were identified as: 'Wandering to find a healing method with ominous signs in the body', 'Having a diagnosis of ALS is like a bolt from the blue and struggling against illness with faint hope', 'Being forced out to the edge of life with anguish', 'Filling one's heart with hatred and longing toward becoming estranged from the world', 'Living with stigma as a stumbling block with bitter grief in one's heart', 'Accepting every things as one's fate with self controlled fear of death', and 'Attaching to desire to live'. Conclusion: The results of this study can be used to develop the programs to support patients with ALS and their family.

• 대한가정학회지
• /
• 제40권12호
• /
• pp.119-129
• /
• 2002

This research aims at finding out situation on purchasing clothes for kids, size recognition and fitting to provide basic data in order to establish standard sizes for kids' clothes. A survey was conducted to 360 mothers who have children ranging from first to third grade in elementary school on clothes purchasing method, wearing situation, criteria in deciding size and fitting preference. In terms of data analysis, frequency, percentage, mean, $X^2$-test, ANOVA and Duncan-test were used via SPSS PC program. The result is as follows; 1. While the recognition on brand was high, the recognition on body size was low: as a result, it is believed that it would be effective to mark the weight along with the brand. 2. Many times, they would select one or two size bigger on all items and they would go for a regular or one that fits as far as filling is concerned showing that it is different from adult clothes. 3. As far as obese kids, they would choose based on the diameter, so the diameter item is right but they are too long in general. The length question should be given special attention when manufacturing clothes for obese kids.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.899-905
• /
• 1996

For the purpose of evaluation of microleakage of class V resin restoration, 64 extracted bovine teeth were filled with two kinds of light curing composite resins(Z-100, Clearfil) and polymerized with 40 seconds of visible light and with 10 seconds of argon laser. After 1000 thermocycling($5^{\circ}C/55^{\circ}C$), specimens were placed in 1 % methylen blue dye solution for 72 hours in $37^{\circ}C$ water bath. The specimens were sectioned at center of filling body and the degree of dye penetration was observed with a stereomicroscope. The following results were obtained, 1. Differences of the microleakage of resin restorations polymerized with 10 seconds of argon laser and 40 seconds of visible light were statistically insignificant. 2. There was more microleakage in Z-100 than clearfil and there was a statistical significancy (p<0.05).