• Journal of Powder Materials
• /
• v.28 no.2
• /
• pp.143-149
• /
• 2021

In this study, (GaN)_1-x(ZnO)_x solid solution nanoparticles with a high zinc content are prepared by ultrasonic spray pyrolysis and subsequent nitridation. The structure and morphology of the samples are investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The characterization results show a phase transition from the Zn and Ga-based oxides (ZnO or ZnGa₂O₄) to a (GaN)_1-x(ZnO)_x solid solution under an NH3 atmosphere. The effect of the precursor solution concentration and nitridation temperature on the final products are systematically investigated to obtain (GaN)_1-x(ZnO)_x nanoparticles with a high Zn concentration. It is confirmed that the powder synthesized from the solution in which the ratio of Zn and Ga was set to 0.8:0.2, as the initial precursor composition was composed of about 0.8-mole fraction of Zn, similar to the initially set one, through nitriding treatment at 700℃. Besides, the synthesized nanoparticles exhibited the typical XRD pattern of (GaN)_1-x(ZnO)_x, and a strong absorption of visible light with a bandgap energy of approximately 2.78 eV, confirming their potential use as a hydrogen production photocatalyst.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.59-70
• /
• 2022

There is a growing interest in evaluating earthquake damage and determining disaster prevention measures due to the magnitude 5.8 earthquake in Pohang, Korea. Since the liquefaction phenomena occurred extensively in the residential area as a result of the earthquake, there was a demand for research on liquefaction phenomenon evaluation and liquefaction disaster prediction. Liquefaction is defined as a phenomenon where the strength of the ground is completely lost due to a sudden increase in excess pore water pressure caused due to large dynamic stress, such as an earthquake, acting on loose sand particles in a short period of time. The liquefaction potential index, which can identify the occurrence of liquefaction and predict the risk of liquefaction in a targeted area, can be used to create a liquefaction hazard map. However, since liquefaction assessment using existing field testing is predicated on a single borehole liquefaction assessment, there has been a representative issue for the whole targeted area. Spatial interpolation and geographic information systems can help to solve this issue to some extent. Therefore, in order to solve the representative problem of geotechnical information, this research uses the kriging method, one of the geostatistical spatial interpolation techniques, and constructs a geotechnical information database for liquefaction and spatial interpolation. Additionally, the liquefaction hazard map was created for each return period using the constructed geotechnical information database. Cross validation was used to confirm the accuracy of this liquefaction hazard map.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.133-140
• /
• 2021

There are few attempts to estimate the strength and stiffness of controlled low strength material (CLSM) using existing field-testing methods. The objective of this study is to evaluate the resilient modulus of CLSM by using the Light Weight Deflectometer (LWD) and investigate the relationships between the resilient modulus from LWD and the unconfined compressive strength (UCS) and secant modulus of elasticity from unconfined compressive test. Five CLSMs with different mix designs are used to evaluate the flowability and the stiffening of the CLSM in the flow and Vicat needle tests, respectively. To evaluate the early strength and stiffness characteristics, unconfined compressive tests are performed using the CLSM specimens cured for 1 and 7 days. LWD tests are carried out to estimate the resilient modulus of the CLSM specimens. The experimental results show that for the curing time of 1 day, the UCS and secant modulus of elasticity generally increase with the fast setting mortar content (FC). The CLSM specimen with the highest FC shows the significant increase in the UCS and secant modulus of elasticity along the curing time. Overall, the resilient modulus for the curing time of 1 day increases with the FC, while that for the curing time of 7days decreases with an increase in the FC. From the results, the linear relationships between the resilient modulus and UCS and secant modulus of elasticity are established.

• Korean Journal of Environment and Ecology
• /
• v.36 no.5
• /
• pp.525-534
• /
• 2022

In this study, we investigated the psychological and physiological effects of experiences in real natural forests and virtual forests using artificially controllable VR. The experiment tested 60 adult college students in a natural forest and a graduate seminar room where external light was blocked. It evaluated the effects of the natural and the VR forest environments by comparing the psychological and physiological recovery of the subjects. Psychometric testing using the PANAS psychological index showed increased positive emotions and decreased negative emotions after experiencing forest scenery in the natural and VR forest environments. And a stress index, based on measuring cortisol in saliva, decreased significantly in the subjects in both environments. The experiment results can be used to support the creation of a psychological and physiological recovery environment with VR for those who cannot go to the natural forest due to certain restrictions such as physical distance, mobility difficulties, etc. It is expected that the results will be the basis for further research into the visual effects of forest healing and also for widening the use of VR, a technology of the fourth industry, in the field of forestry.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.193-200
• /
• 2022

In this study, the finite-failure NHPP software reliability model was applied to the software development model based on the Weibull lifetime distribution (Goel-Okumoto, Rayleigh, Type-2 Gumbe), which is widely used in the software reliability field, and then the cost attributes were compared and evaluated. For this study, failure time data detected during normal operation of the software system were collected and used, the most-likelihood estimation (MLE) method was applied to the parameter estimation of the proposed model, and the calculation of the nonlinear equation was solved using the binary method. As a result, first, in the software development model, when the cost of testing per unit time and the cost of removing a single defect increased, the cost increased but the release time did not change, and when the cost of repairing failures detected during normal system operation increased, the cost increased and the release time was also delayed. Second, as a result of comprehensive comparative analysis of the proposed models, it was found that the Type-2 Gumble model was the most efficient model because the development cost was lower and the release time point was relatively faster than the Rayleigh model and the Goel-Okumoto basic model. Third, through this study, the development cost properties of the Weibull distribution model were newly evaluated, and the analyzed data is expected to be utilized as design data that enables software developers to explore the attributes of development cost and release time.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.4
• /
• pp.239-248
• /
• 2022

The taxonomy of bacteria in the field of clinical microbiology is in a state of constant flux. A large-scale revamping of the classification and nomenclature of anaerobic bacteria has taken place over the past few decades, mainly due to advances in molecular techniques such as 16S rRNA and whole genome sequencing (WGS). New genera and species have been added, and existing genera and species have been reclassified or renamed. A major role of the clinical microbiological laboratories (CMLs) is the accurate identification (ID) and appropriate antimicrobial susceptibility testing (AST) for clinically important bacteria, and rapid reporting and communication of the same to the clinician. Taxonomic changes in anaerobic bacteria could potentially affect the choice of appropriate antimicrobial agents and the antimicrobial breakpoints to use. Furthermore, current taxonomy is important to prevent treatment failures of emerging pathogenic anaerobes with antimicrobial resistance. Therefore, CMLs should periodically update themselves on the changes in the taxonomy of anaerobic bacteria and suitably inform clinicians of these changes for optimum patient care. This article presents an update on the taxonomy of clinically important anaerobic bacteria, together with the previous names or synonyms. This taxonomy update can help guide antimicrobial therapy for anaerobic bacterial infections and prevent treatment failure and can be a useful tool for both CMLs and clinicians.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.246-254
• /
• 2023

V. parahaemolyticus causes waterborne and foodborne disease such as acute diarrhea. In this study, V. parahaemolyticus isolates from seawater, fish tanks, and distributed fishery products in Jeju were investigated for potential toxin or species-specific genes (tdh, trh, tlh, and toxR) using RT-PCR and their genetic characteristics were analyzed using Pulsed-field gel electrophoresis (PFGE). Overall, V. parahaemolyticus of 90 strains (36.7%), including 33 strains from seawater, 8 strains from fish tanks, and 50 strains from fishery products, were isolated from 245 samples. All V. parahaemolyticus strains did not detect the tdh gene, whereas all strains detected tlh or toxR genes. In addition, trh genes were detected in 3 strains from seawater and 1 strain from fishery products. Monthly quantitative testing of seawater revealed that V. parahaemolyticus was positively correlated with water temperature. The 90 strains of V. parahemolyticus obtained in this study showed by gene homology between types, ranging from 64.0-97.3%. Among these, thirteen types showed 100% homology between genes. These results indicate that continuous monitoring is needed to facilitate food poisoning epidemiological investigations because some isolated V. parahaemolyticus strains harbored toxin genes and V. parahaemolyticus strains isolated from seawater, fish tanks, and distributed fishery products showed genetic similarity.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.71-83
• /
• 2007

Liquefaction resistance depends strongly upon the degree of saturation, which is expressed in terms of the pore pressure coefficient, B. The B-value has been widely used to quantify the state of saturation of laboratory samples. However, it is practically impossible to determine in situ state of saturation by using the B-value. So, P-wave velocity can be alternatively used as a convenient index for evaluating the in situ state of saturation. In this paper, the Stokoe type torsional shear (TS) testing system was modified to saturate the specimen, with which it is also possible to measure P ($V_p$), S-wave velocity ($V_s$) and the excess pore water pressure buildup In order to examine the effect of B-value for nearly saturated sands. A series of the tests were carried out at 3 relative densities (40%, 50% and 75%) and various B-values using Toyoura sand. Based on the test results, the variations of $V_p\;and\;V_s$ with B-value were analyzed and compared with a existing theoretically derived formula. The normalized pore water pressure, $du/{\sigma}{_0}'$ and cyclic threshold shear strain, ${\gamma}^c_{th}$ with B-value were also analyzed. Additionally the test results related to pore water pressure were analyzed by $V_p$ to apply to the field seismic analysis.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.1
• /
• pp.49-60
• /
• 2022

This study attempted to provide the basic data for developing a system to identify the role of medical technologists and ensure an efficient response for quick and accurate diagnostic tests in the COVID-19 era. The research method involved using focus group interviews for a survey and analysis of 15 medical institutions. Eleven sample collection institutions, 10.4 medical technologists, 2.1 minutes of collection time, 5.4 hours of test time, 9,670 tests, 6.2 member test workforce size, and 7 screening center operating institutions were surveyed. The results of the focus group interview analysis revealed that there were no standardized guidelines covering working hours, area, and environment to protect sample collectors and testers in relation to the COVID-19 tests. Also, legal protection measures were insufficient in the event of accidental infections and there were no personnel regulations related to COVID-19. In addition, the professional training of sample collectors and molecular diagnostic testers was required for reliable COVID-19 testing. In conclusion, it is necessary to provide professional education through special test short-term training institutions to cope with emergency infectious diseases such as COVID-19. Legal systems should be put in place to protect the workforce and ensure stability.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.103-110
• /
• 2023

This study targeted KakaoTalk app users, mainly in Seoul and the metropolitan area, and verified the factors that had a significant impact on the intention to continuously use the app through KakaoTalk contents. Among various content characteristics, five variables were used to verify the variables that had the greatest influence on the intention to continue using, and the ones that did not. As a result of testing the five hypotheses, it was found that convenience, enjoyment, informativeness, and perceived usefulness had a significant positive(+) effect on the intention to continue using, but intimacy did not. From this, it can be determined that the majority of users use the app content because it is useful and informative, rather than because they have a sense of familiarity. In this way, the purpose of this study is to provide empirical help to factors closely related to the intention of continuous use in deriving priorities to be considered in the service planning stage as well as in terms of technical design of contents when developing mobile apps in the mobile app industry as a whole and in the field in the future. I want to provide it, but there is a meaning.