• The Korean Journal of Food And Nutrition
• /
• v.15 no.3
• /
• pp.257-266
• /
• 2002

The purpose of this study is screening of microfloras involved in hydrolysis of seaweed tenella, seaweed fusiforme and green laver. This is a part of studies on the hydrolysis of seaweed using microorganisms. First, about two hundred microflora samples were obtained from mountain, rice field, dry field, sea, seaside and fish market in the vicinity of Yeosu. Thirty-three microflora samples were screened from the destruction of tissue in sea tangle and sea mustard. It was sufficient that results of the naked eye observation were obtained at eight microflora samples as a feces of bull, a decayed pine tree, a soil of dry field, the mud of the banks in a rice field, the water of a ditch in a rice field, the weed of the banks in a rice field, the water in a rice field and leaved in the air. Above all, extraction rate and contents of reducing sugar in extracts of seaweeds added a decayed pine tree(sample No. 8) and the water of a ditch in a rice field(sample No. 27) were showed high value. And the value of chemical analysis of the sample is much better in comparison with control. Accordingly the hydrolysis of seaweed using microorganisms in the inside of these microflora samples can be possible.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.47-51
• /
• 2004

Giant magneto-impedance (GMI) effect in zero-magnetostrictive Co-based amorphous ribbons samples in their as-quenched and stress-released states as well as with intentionally induced magnetic anisotropy were investigated. Magnetic and impedance properties of the samples exhibiting different anisotropy were compared and the optimum operation conditions for the studied samples from the view-point of their utilization as a sensor element have been determined. A design of a model of magnetic field sensor and characteristics of the constructed prototype are presented.

• The Korean Journal of Zoology
• /
• v.28 no.1
• /
• pp.9-20
• /
• 1985

Univariate and multivariate analyses of morphometric characters were performed with samples of striped field mice, Apodemus agrarius coreae Thomas, collected from Mt. Taebaek area, Mt. Wolak area, Mt. Palgong area, and Chongju area. It was confirmed that the samples of A. agrarius coreae were similar with one another to be grouped into a single subspecies. Moreover, clinal variation related with the altitude of localities where samples were collected was revealed in the first axis resulted from discriminant analysis and in the length of tail vertebrae.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.623-627
• /
• 2016

$La_{1-x}Ba_xMnO_3$ (x = 0.30, 0.35 and 0.40) samples have been prepared by solid-state reaction method. The X-ray diffraction (XRD) study showed that all the samples crystallized in a rhombohedral structure with an R-3c space group. Variation of the magnetization as a function of the temperature and applied magnetic field was carried out. All the samples revealed ferromagnetic to paramagnetic (FM-PM) phase transition at the Curie temperature $T_C{\sim}342K$. The magnetic entropy change was also studied through examination of the measured magnetic isotherms M(H, T) near $T_C$. The magnetocaloric effect was calculated in terms of the isothermal magnetic entropy change. The maximum entropy change reaches a value of 1.192 J/kgK under a magnetic field change of 2.5T for the $La_{0.6}Ba_{0.4}MnO_3$ composition. The relative cooling power (RCP) is 79.31 J/kg for the same applied magnetic field.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.298-304
• /
• 2017

Coil spring steels from the automobile suspension part after field exposure for 10 years and those after anti-corrosion validation test in proving ground of 5,000 ~ 10,000 km were examined for corrosion damages. Partial loss of paint, accumulation of corrosion product, and cracking of paint and superficial material were observed. The surface and subsurface region of spring steels had compressive residual stress and high hardness by shot peening. The surface hardness values of the specimens were 620 ~ 670 Hv. They were 60 ~ 80 Hv higher than those of the samples taken from the middle part of the spring. The maximum compressive stress was -916 ~ -1208 MPa measured at depth of about $100{\mu}m$. Electrochemical impedance spectroscopy showed that the resistances of charge transfer and the paint layer of the spring steels ranged from several tens to millions ${\Omega}{\cdot}cm^2$. The resistance of the field samples was much higher than that of the proving ground samples used in this study, implying that the proving ground test condition would be more corrosive than the field environment.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.41-49
• /
• 2002

Recently, pilot studies showed an evidence of reduction of airborne hexavalent chromium, Cr(VI), on PVC filter during air sampling and storage. However, the information on this in the field was limited. Thus, we studied the reduction behaviors of airborne Cr(VI) on PVC filters during sampling and storage at three field electroplating operations. Regression between sampling time and the reduction (ratio of Cr(VI) to total Cr concentrations) was not statistically significant (p>0.05). However, the reductions in samples collected for 240 ～ 340 minutes were significantly higher than those for 30 - 60 minutes. On the other hand, another experiment showed a good correlation (r=0.96) between sampling time and the reduction without an exceptional value. Storage temperature was not a factor affecting the reduction of Cr(VI) collected on PVC filter. The loss of Cr(VI) samples stored in alkali solution (2% NaOH/3% Na$_2$CO$_3$) was significantly lower than that stored in vial according to NIOSH method (p<0.05). Thus, dipping Cr(VI) samples into alkali solution was a storage method to minimize tile reduction.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1450-1452
• /
• 1996

In order to optimize the characteristics of gate insulator for FED(field emission device), we investigated the effect of wet-etching process on the gate insulator for fabrication of FED. We used the general three types of etchants for fabrication of the metal tip FEA(field emitter array), they are MO and oxide etchants to form the gate hole, and Al etchant to remove the release layer. In the result of the breakdown field of the insulator by the measure of the current-voltage characteristics, the breakdown field of insulator for immersing in oxide etchant was rapidly lowering with increasing etching time, but that for immersing in Al etchant was slow lowering. Also, in comparing cleaning with non-cleaning samples, the breakdown field of the cleaning samples was higher than that of non-cleaning samples.

• Ceramist
• /
• v.10 no.3
• /
• pp.55-66
• /
• 2007

Infrared Scanning Near-field Optical Microscopy (IR-SNOM) is an extremely powerful analytical instrument since it combines IR spectroscopy's high chemical specificity with SNOM's high spatial resolution. In order to do this in the infrared, specialty chalcogenide glass fibers were fabricated and their ends tapered to generate SNOM probes. The fiber tips were installed in a modified near field microscope and both inorganic and biological samples illuminated with the tunable output from a free-electron laser located at Vanderbilt University. Both topographical and IR spectral images were simultaneously recorded with a resolution of ${\sim}50\;nm$ and ${\sim}100\;nm$, respectively. Unique spectroscopic features were identified in all samples, with spectral images exhibiting resolutions of up to ${\lambda}/60$, or at least 30 times better than the diffraction limited lens-based microscopes. We believe that IR-SNOM can provide a very powerful insight into some of the most important bio-medical research topics.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1258-1259
• /
• 2008

In this paper, the variable tendency of the piezoelectric constant and resonance characteristics of the piezoelectric ceramics due to the electric field is studied. The practical application of piezoelectric ceramics is not only applied in field of small signal. For example, in case of an ultrasonic motor, 120 ${\sim}$ 130Vrms of driving voltage is needed. Therefore, to examine the characteristics of piezoelectric ceramics in large signal contributes to reducing the susceptibility to the multifarious application and securing the ease of the production of control circuit. These contributions may be connected to the expansion of industrial application. We fabricated disk-type piezoelectric ceramic samples by using conventional method and measured the resonance characteristics of these samples under from low to high voltage driving conditions. According to increasing the value of the input voltage, we measured the resonance frequency of the piezoelectric ceramic, and inquired into the cause of these phenomena.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.5
• /
• pp.709-717
• /
• 2015

Airborne bacteria from hog farms may have detrimental impacts on human health, particularly in terms of antibiotic resistance and pathogen zoonosis. Despite human health risks, very little is known about the composition and diversity of airborne bacteria from hog farms and hog-related spray fields. We used pyrosequencing analysis of 16S rRNA genes to compare airborne bacterial communities in a North Carolina hog farm and lagoon spray field. In addition, we isolated and identified antibiotic-resistant bacteria from both air samples. Based on 16S rRNA gene pyrosequence analysis, Actinobacteria, Bacteroidetes, Firmicutes, and Proteobacteria were the dominant phyla in airborne bacterial communities from both hog farm and spray field sites. Within the Firmicutes genera, Clostridium spp. were more abundant in the hog farm, whereas Staphylococcus spp. were higher in the spray field. The presence of opportunitic pathogens, including several Staphylococcus species and Propionibacterium acnes, was detected in both bioaerosol communities based on phylogenetic analysis. The isolation and identification of antibiotic-resistant bacteria from air samples also showed similar results with dominance of Actinobacteria and Proteobacteria in both hog farm and spray field air. Thus, the existence of opportunistic pathogens and antibiotic resistant bacteria in airborne communities evidences potential health risks to farmers and other residents from swine bioaerosol exposure.