• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.1-8
• /
• 2004

In order to solve the shortage of roughage supply for dairy farm in Korea, winter cereal forage production after harvesting of rice in the fallow paddy field was studied. Two parts are already reported at the previous paper - One was the model development of the mechanized production, and the other was the study of feasibility of the model and its desirable direction in Korea. In this study, the model system is applied for a winter cereal wrap silage production model to practice in Kyungbook National University farm on 3ha scale for 3 years. Results of the research are summarized as follows; It takes 2 or 3 working days to process the wrap silage in middle of May in Daegu region. Also, not much particular problem can be found during the application test of mechanized wrap silage production. Field capacity and field efficiency are estimated to be 0.6-0.85㏊/h and 50-70% in mowing, 1.1∼1.7㏊/h and 52∼80% in tedding and raking, 0.6∼1.1㏊/h and 25∼45％ in baling and 0.5∼0.57㏊/h and 75∼85% in wraping, respectively. Total production cost is estimated to be 1,257won/kg-TDN in oversowing and wrap-silage harvest in 1.6㏊ working area. As a result, large scale field is recommended to produce the wrap silage in order to maximize the field capacity.

• 에너지공학
• /
• 제23권3호
• /
• pp.102-115
• /
• 2014

국내 동해 울릉분지에는 막대한 부존량과 청정 에너지원으로 높은 잠재력을 지닌 가스하이드레이트가 부존되어 있으며, 2010년 울릉분지 2차 시추지역(UBGH2)에서 현장 생산 시험 후보지 선정을 위한 목적으로 시추작업이 수행되었다. 이 연구에서는 동해 울릉분지 현장 생산 시험 후보지역의 지질학적 모델을 바탕으로 전산 수치 해석을 이용하여 가스하이드레이트 퇴적층 내 해리 유동 및 산출성을 분석하였으며, 주요 생산 조건별 감압 생산 거동에 대한 민감도 분석을 수행하였다. 이를 통해 가스하이드레이트 현장 생산 시험 계획 수립 시 요구되는 예비 분석 자료를 도출하였다.

• 방송공학회논문지
• /
• 제17권1호
• /
• pp.1-16
• /
• 2012

양안식 입체 영상 미디어의 제작 워크플로우 개선을 위해, 본 논문에서는, 제작 및 후-제작 단계에서 발생할 수 있는 다양한 제작 왜곡들이 시청 피로도에 미치는 영향을 주관적 시청 실험을 통해 분석하였다. 주관적 시청 실험의 객관적 지표 생성을 위해 제작 왜곡의 요인들을 분류하여 7가지의 대표적 시청 피로도 유발 요인을 선정하고, 선정된 각 요인 별 시청 실험을 위해 카메라와 피사체의 움직임 정도를 조합하여 4가지 실험 동영상을 제작하였다. 제작된 실험 영상들은 각기 7단계의 제작 왜곡을 부가하여 5초 단위의 시청 실험 콘텐츠 196개를 생성하였으며, 생성된 콘텐츠와 ITU-R BT.1438 권고에 따라 총 101명의 실험 참가자를 모집하여 주관적 시청 실험을 실시하였다. 실시된 시청 실험의 분석 결과는 제작 현장에서 발생할 수 있는 다양한 왜곡에 대한 상대적인 중요도 및 각 오차에 대한 허용 한계 범위 등에 대한 기본 정보를 제공한다.

• 복식
• /
• 제65권2호
• /
• pp.125-143
• /
• 2015

This study is to propose an 'education-training-certificate of qualification' design of fashion accessories production, which can be applied to education in universities and individuals. It is based on the National Competency Standards (NCS), which was developed through the '2013 National Competency Standards Development Project' for the fashion accessories production. FGI (Focus Group Interviews), which is a research methodology, is carried out on target groups of educational experts and specialists in the field of fashion accessories production. Through this, five courses were suggested; first, 'fashion accessories design' course was proposed for the education and training of 'design development' and 'development of raw materials'. Secondly, 'fashion product production' course was proposed for the education and training of 'production of samples'. Thirdly, 'fashion product manufacture and planning' course was proposed for the competency element units: 'calculation of cost', 'determination of mass production model and price', 'planning of the main manufacturing process' and 'ordering of raw materials'. Lastly, 'mass production of fashion products' course and the 'field practice of fashion product manufacture' course were proposed for the competency element units: 'planning for mass production', 'preparation for mass production', 'mass production' and 'inspection of completed products'. In addition, a new certificate of 'technician of fashion accessory production' was proposed in order to test qualified skills for the fashion accessories production. The test is composed of a written examination of short-answer questions, technical drawing and production.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1511-1516
• /
• 2009

In recent years, the large-scale shaft have been appling in domestic mine for mass production using a large machine, the safety of mine also have been increasing. And the new trial that shotcrete of tunnel field was apply to mine support was progressed. But, the conditions of domestic mine was different from that of tunnel, so, the batch plant of tunnel could not be installed in mine field because of low economical efficiency and difficulty for selection of site. Ready-mixed Shotcrete that mixed with high quality materials and could be controled shotcrete quality is producted in plants and transported to field, so do not need to batch plant. In this study, The Field test of the Ready-mixed Shotcrete was performed in the large-scale mine and was compared with the quality of Field mix shotcrete. As the result of the Field test, compressive strength and rebound of Ready-mixed Shotcrete were superior to these of Field mix shotcrete.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.259-265
• /
• 2018

In this paper, we propose a test method to evaluate the reliability of the recliner sofa in the early stage of production. In order to develop the test method, we analyzed the failure mechanism occurring in the field and designed the performance test, environmental test, accelerated life test methods based on the analysis of failure mechanism. The failure mechanism is reproduced by applying the designed test. The reliability of the recliner sofa can be verified at the production stage through the proposed test method.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.21-33
• /
• 2014

PURPOSES: The purpose of this study was to break away from the workforce method using cold-mix asphalt mixtures and has a constant quality and has develop repair materials of pre-production asphalt-precast types. METHODS: The selection of the repair material was determined as the results obtained through physical properties of materials and the field applicability. In case of repair materials, values obtained through Marshall stability test & the dynamic stability test & retained stability test as well as the site conditions was considered. In case of adhesive, test results were obtained through examination of the bond strength(tensile, shear) and the field applicability of the adhesive was examined through combined specimens to simulate field applications. RESULTS : According to the results of laboratory tests, in the case of repair materials, Marshall stability and dynamic stability, retained stability of cold-mix reaction type asphalt mixture is the highest. In the case of adhesive, two-component epoxy-urea has a very high bonding strength(tensile, shear) was most excellent. According to the results of field tests, when epoxy-urea was excellent workability. Also, the repair body through actual mock-up test did not occur large deformation and fracture after 12 months. CONCLUSIONS : A suitable repair material is cold-mix reaction type mixture of asphalt-precast, a suitable adhesive is a two-component epoxy-urea.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.37-44
• /
• 2008

Nowadays, the increasing global competition forces manufacturer to reduce the cost and time for implementation of manufacturing system. The AR(augmented reality) technology as a new human-machine interface introduces a noteworthy perspective for a new manufacturing system design. Using AR technology, a physically existing production environment can be superimposed with virtual planning objects. Therefore, the planning tasks can be validated without modeling the surrounding environment of the production domain during short process planning time. In this paper, we introduce the construction of AR browser and determine the optimal environment parameters for field application of AR system through lots of tests. And, many methods such as multi-marker coordinate system, division of virtual objects and so on, are proposed in order to solve the problems suggested from initial field test. Based on these tests and results, the test-bed of C/Pad assembly system is configured and robot program for C/Pad assembly is generated based on AR system.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.67-74
• /
• 2017

PURPOSES : The objective of this study is to ascertain the curing period of cementless cold central plant recycled asphalt base-layer, using mechanical analyses and specimen quality tests on the field. METHODS : Cold central plant recycled asphalt base-layer mixture was produced in the plant from reclaimed asphalt, natural aggregate, filler for the cold mix, and the modified emulsion AP using asphalt mix design and plant mix design. In order to examine the applicability of the curing period during the field test, the international standards for the possibility of core extraction and the degree of compaction and LFWD deflection were analyzed. Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on the specimens of asphalt mix and plant mix design. RESULTS : The plant production process and compaction method of cementless cold central plant recycled asphalt base-layer were established, and the applicability of the optical moisture content for producing the mixture was verified through the field test. In addition, it was determined that the core extraction method of the conventional international curing standard was insufficient to ensure performance, and the LFWD test demonstrated that the deflection converges after a two-day curing. However, the back-calculation analysis reveals that a three-day curing is satisfactory, resulting in a general level of performance of dense asphalt base-layer. Moreover, from the result of the specimen quality test of the asphalt mix design and plant mix design according to the curing period, it was determined that the qualities satisfied both domestic and international standards, after a two-day curing. However, it was determined that the strength and stiffness after three-day curing are higher than those after a two-day curing by approximately 3.5 % and 20 %, respectively. CONCLUSIONS:A three-day curing period is proposed for the cementless cold central plant recycled asphalt base-layer; this curing period can be demonstrated to retain the modulus of asphalt-base layer in the field and ensure stable quality characteristics.