• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.479-484
• /
• 2014

In this paper, we consider the construction of cyclic and quasi-cyclic structured q-ary low-density parity-check (LDPC) codes over a designated small field. The construction is performed with a pre-defined sliding-window, which actually executes the regular mapping from original field to the targeted field under certain parameters. Compared to the original codes, the new constructed codes can provide better flexibility in choice of code rate, code length and size of field. The constructed codes over small fields with code length from tenths to hundreds perform well with q-ary sum-product decoding algorithm (QSPA) over the additive white Gaussian noise channel and are comparable to the improved spherepacking bound. These codes may found applications in wireless sensor networks (WSN), where the delay and energy are extremely constrained.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.58-66
• /
• 2005

Pseudo-Near Field Recording (Pseudo-NFR) system is proposed to prevent contamination and oxidation of media surface occurred in conventional NFR systems. To solve these critical problems of the NFR systems, we investigate the optimal thickness of cover layer for Pseudo NFR. This paper presents the theoretical analysis for cover layer thickness based on the measured length of dust particle and numerical simulation for the temperature distribution using Finite Difference Time Domain (FDTD) method and heat conduction equation. To verify the simulation results, we conduct and compare simulation results in case of far field MO recording and near field MO recording. A measured dust particle length in general environment was mostly less than $20{\mu}m$, and the optimal thickness of cover layer is $30{\mu}m$ in this case. Based on the designed optimal cover layer thickness, temperature distribution is simulated to have $800{\~}850^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.611-613
• /
• 2016

The characteristics of tunnel field-effect transistor(TFET) structure with source-overlapped gate was investigated using a TCAD simulations. Tunneling is mostly divided into line-tunneling and point-tunneling, and line-tunneling is higher performance than point-tunneling in terms of subthreshold swing(SS) and on-current. In this paper, from the simulation results of source-overlapped gate length effects at silicon(Si), germanium(Ge), Si-Ge hetero TFET structure, the guideline of optimal structure with highest performance are proposed.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.971-997
• /
• 2018

The parity of cyclotomic numbers of order 2, 4 and 6 associated with 4-cyclotomic cosets modulo an odd prime p are obtained. Hence the explicit expressions of primitive idempotents of minimal cyclic codes of length $p^n$, $n{\geq}1$ over the quaternary field $F_4$ are obtained. These codes are observed to be subcodes of Q codes of length $p^n$. Some orthogonal properties of these subcodes are discussed. The minimal cyclic codes of length 17 and 43 are also discussed and it is observed that the minimal cyclic codes of length 17 are two weight codes. Further, it is shown that a Q code of prime length is always cyclotomic like a binary duadic code and it seems that there are infinitely many prime lengths for which cyclotomic Q codes of order 6 exist.

• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.421-437
• /
• 2018

Free vibration analysis of a three-layered microbeam including an elastic micro-core and two piezo-magnetic face-sheets resting on Pasternak's foundation are studied in this paper. Strain gradient theory is used for size-dependent modeling of microbeam. In addition, three-unknown shear and normal deformations theory is employed for description of displacement field. Hamilton's principle is used for derivation of the governing equations of motion in electro-magneto-mechanical loads. Three micro-length-scale parameters based on strain gradient theory are employed for prediction of vibrational characteristics of structure in micro-scale. The results show that increase of three micro-length-scale parameters leads to significant increase of three natural frequencies especially for increase of second micro-length-scale parameter. This result is according to this fact that stiffness of a micro-scale structure is increased with increase of micro-length-scale parameters.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.10-13
• /
• 1999

For large scale applications of high temperature superconductor(HTS) such as transmission cables, motors and generators, long length of flexible HTS conductors is required. Currently, HTS tape that is capable of being fabricated in long length by industrial processes is the Bi-2223 HTS tape. In this study, we fabricated 19 filamentary Bi-2223($Bi_{1.8}$$Pb_{0.4}$$Sr_{2}$$Ca_{2}$$Cu_{3}$$O_{10+X}$) HTS tape with 100m length by PIT(Powder In Tube) process. Critical current(Ic) of this long length tape was measured 18.5 A at 77 K, self field and short sample Ic is 32.5 A at the same condition. Critical current of 100m length tape was decreased by about 1/3 compared to that of short tape. This was mainly resulted from the increase of non homogeneity in oxide layer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.37-44
• /
• 1992

Germinability, electrophoretic variation of protein of shattered seeds during overwintering and characteristic of main agronomic traits of off-type rice plant occurring in paddy field harvested by combine were investigated. Germinability of shattered seed decreased as time goes in paddy field in both Japonica and Tongil type varieties. Electrophoretic protein bands become more and more light as time goes. Occurrence of off-type rice plant was higher in Japonica varieties than in Tongil type varieties. Off-type rice plant was shorter in plant height, leaf length, tiller number per hill, internode length, panicle length and spike let number per panicle. Germinability of seeds of off-type rice plant as not significantly different compared to the control variety. Yield of off-type plants of Japonica varieties was on average 5.1kg / 10a and that of Tongil type varieties was on average 0.9kg /10a. Mixing ratio to the control variety was about 0.7% in Japonica varieties and that of Tongil type varieties was about 0.1%.

• Journal of radiological science and technology
• /
• v.10 no.1
• /
• pp.75-83
• /
• 1987

The insulating oil used for X-ray tube housing were degraded by X-ray irrdiation, high temperature and high anode voltage for normal operation. This study was measured the conduction current-X-ray dose, heating degradation, time, temperature and electric field characteristics and the dependense of electrode materials and gap length in the X-ray irradiatied insulating oil under of D.C voltage. The obtained results can be summarized as following. 1. The conduction current of X-ray irradiated insulating oil is more about $2.5{\sim}3$ times as large as than that of non x-ray irradiated, and is become saturation phenomena after some degree. 2. The conduction current of many times heating x-ray irradiated insulating oil is more than that of a few times heating. 3. The higher temperature x-ray irradiated insulating oil is increased, the more conduction current, and that is increased about ten times as large as when it's temperatures is increased to $80^{\circ}C\;at\;30^{\circ}C$, twenty five times at $100^{\circ}C$. 4. The dependence of electrode materials is appeared at the low electric field, and the small gap length with Fe > Cu > Al. 5. The low electric field than 3000 v/cm is appeared Ohm's law region, and the high is become saturation region at the I-E characteristics. 6. The larger gap length is become, the more conduction current is increased at the same electric field.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.12-16
• /
• 2020

As high homogeneity in magnetic field is required to increase the resolution of MRI magnets, various shimming methods have been researched. Using one of them, the design of the superconducting active zonal shim coil for MRI magnets is discussed in this paper. The magnetic field of the MRI magnet is expressed as the sum of spherical harmonic terms, and the optimized current density of shim coils capable of removing higher-order terms is calculated by the Tikhonov regularization method. To investigate all potential designs derived from calculated current density, 4 sweeping parameters are selected: (1) axial length of shim coil zone; (2) radius of shim coils; (3) exact axial position of shim coils; and (4) operating current. After adequate designs are determined with constraints of critical current margin and homogeneity criterion, the total wire length required for each is calculated and the design with a minimum of them is chosen. Using the superconducting wire length of 9.77 km, the field homogeneity over 50 cm DSV is improved from 24 ppm to 1.87 ppm in the case study for 9.4 T whole-body MRI shimming. Finally, the results are compared with the finite element method (FEM) simulation results to validate the feasibility and accuracy of the design.