• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.40.1-40.1
• /
• 2020

The Korea Astronomy and Space Science Institute is participating as a South Korean partner in the Commercial Lunar Payload Services (CLPS)of NASA. In response, the Korea Astronomy and Space Science Institute is currently conducting basic research for the development of four candidate instrument payloads. The magnetic field instrument is one of them and it's scientific mission objective is the moon's surface magnetic field investigation. Therefore, the development requirement of the lunar surface magnetic field instrument were derived and the initial conceptual design was started. The magnetic field instrument has a 1.2 meter boom which has two three-axis fluxgate magnetometer sensors and one gyro sensor to get a attitude information of the boom. The concept of measuring the lunar surface magnetic field will carry out using multiple sensors by placing semiconductor type magnetic field sensors inside the electric box including boom mounted fluxgate sensors. In order to overcome the very short development period, we will use the KPLO (Korean Lunar Pathfinder Orbiter) magnetometer design and parts to improve reliabilities for this instrument. In this presentation, we introduce the instrument requirements and conceptual design for the Lunar surface magnetic field instruments.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.323-327
• /
• 2001

A new method is developed to estimate the evaporation of water from a surface with high accuracy and resolution. The principle of new method is to detect a weight change of buoyant weight according to a change in water level of Class A Pan mesured by the use of a strain-gauge load cell. Field test of evaporation recording new instrument was carried out at Suwon for 10 days July 1999. It is possible in field observation to measure hourly evaporation amount by newly developed evaporation recording instrument in Class A Pan against strong solar radiation. Present study provide a possibility of domestic high accuracy instrument development below than 0.1mm water level measurement accuracy. If there is low humidity and high wind speed conditions which is possible to evaporate from water surface during night time. And it needs continuous study to understand between meteorological elements and latent heat effect at ground level by field observation study using high accuracy evaporation recording instrument.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2451-2453
• /
• 1998

With the recent trend to get more into the information age we suppose that the need of information for medical industry policy establishment and new product development of medical instrument will increase rapidly. The object of this research & development is the construction of a database system with information resources in the field of medical instrument for an efficient application of domestic and abroad information in the field of medical instrument and building the foundation for the construction of an unified information management system. In this research we finished the analysis of the collected material of informations for medical instrument industry, design of the database system with object-oriented modelling is done. and we developed pre-product level information management system running on WINDOWS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1529-1531
• /
• 2008

Since the discovery over a decade ago, carbon nanotubes (CNTs) have been attracting considerable attentions both from scientists and engineers. Because of the excellent field emission properties, such as high aspect ratio, extremely small diameter, and high emission current, CNTs become a potential candidate as field emitter for field emission display (FED) and lighting (FEL) as backlight for LCD. Due to the exceptional physical properties, such as superior thermal and electrical conductivities, as well as high stiffness and strength, the CNT-based composites can be as light-weight heat-sink or thermal spreader materials used for power electronic devices, such as power LED for general illumination. The CNTs for above applications will be reviewed, and related materials and devices will be demonstrated in this paper.

• Journal of The Korean Association For Science Education
• /
• v.15 no.1
• /
• pp.92-103
• /
• 1995

Since the late of 1960,s, the improvement of science inquiry skills has been one of the most important goals in secondary science education. To achieve this goal, it is essential to develop a valid and reliable instrument for evaluating science inquiry skills. The purpose of this study is to develop a valid and reliable instrument for evaluating science inquiry skills for high school students. The instrument is developed through R & D procedure, which includes two field trials of the instrument. This study has formed a clear definition of the elements of science inquiry skills (formulating a hypothesis, controlling variables, designing an experiment, numeric calculation, graphing experimental data, inference, determining relationship, determining causalities, predicting experimental results , drawing a conclusion, formulating a generalization or model), and established the goals of assessment and developed the items of assessment. The instrument, Test of Earth Science Inquiry Skills, consists of 33 items which measure 11 science inquiry skills. There are content-free items for each science inquiry skills. This study has selected 11 science inquiry skills which are considered appropriate for being evaluated by paper-and-pencil test with SIEI (Hur,1984). The content validity of items, objectivity of the scoring keys and clarity of the items were checked by six experienced specialists in science education. At the same time, the two field trials has been executed and produced the reliability of the instrument, item difficulty index, and the effectiveness of distracters. The first field trial was performed using a sample of 304 high school students, and the second one using a sample of 872 high school students. Because the content validity is 84 % and the reliability (K-R 20) is 0.84, the developed instrument in this study is considered valid and reliable. The difficulty index is 49.4 %, answer ratio 59.1 %, the discrimination index 0.47 and the effectiveness of distracters evenly distributed, which also suffice the criteria of good instrument. The developed instrument in this study can diagnosis the well-developed science inquiry skills and the ill-developed science inquiry skills of the students, and trace the degree of the improvement of science inquiry skills.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• Journal of Korean Academy of Nursing
• /
• v.34 no.3
• /
• pp.552-564
• /
• 2004

Purpose: This study was to develop a client health status outcome evaluation instrument, and examine content validity, reliability, construct validity, and the acceptability of this instrument. Method: A preliminary list was made of such key information as standards, criteria, indicators and measures, by means of a broad review of literature within the field. After determining the preliminary instruments, the study sought to obtain examination, consensus, and modification of two groups of experts in the home-care field. Finally, the instrument examined content validity, reliability, construct validity, and the acceptability of this instrument. Result: The tool was considered of 13 criteria, 48 indicators, and 167 detail measures. The content validity index of the tool was above 0.8 according to the expert group. Regarding the reliability of the evaluators of standards 1 and 2, the degree of agreement between evaluators was high(96.4% through 98.2%). Construct validity in this study, the difference in the mean score between the baseline point and the follow up point of each of standards 1 and 2 was significant, and the mean score of the follow up point was more than that of the baseline point. After examining the acceptability of this instrument with practice managers and home care nurses in home care institutions, a positive opinion was given of this instrument, and it was indicated that to be useful and applicable in home care practice. Conclusion: The results of evaluating client outcome will contribute to overall outcome-based quality improvement and service marketing in home care by providing a constant gauge of home care effectiveness.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.341-348
• /
• 2009

We report the development of full-field swept-source optical coherence tomography (SS-OCT) in the wavelength range of 815-870 nm using a unique combination of super-luminescent diode (SLD) as broad-band light source and acousto-optic tunable filter (AOTF) as a frequency-scanning device. Some new applications of full-field SS-OCT in forensic sciences and engineering materials have been demonstrated. Results of simultaneous topography and tomography of latent fingerprints, silicon microelectronic circuits and composite materials are presented. The main advantages of the present system are completely non-mechanical scanning, wide-field, compact and low-cost.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.14-22
• /
• 2017

The NMR's probe consists of the static magnetic field generator (magnetic source) and the RF coil. It is very strict for the homogeneity of the static magnetic field intensity of the magnetic source, so the cost of the magnetic source is more expensive in the entire nuclear magnetic resonance instrument. The magnetic source generally consists of electromagnet, permanent magnet and superconducting magnet. The permanent magnet basically needs not to spend on operation and maintenance and its cost of manufacture is much cheaper than the superconducting magnet. Therefore, the permanent magnet may be the only choice for the static magnetic field device if we want to use the magnetic resonance instrument as an analyzer for production by reducing price. A new probe magnet was developed on the basis of the permanent magnet ring in this paper to provide a technological way for reducing the manufacturing cost, weight and volume of the existing nuclear magnetic resonance instrument (including MRI) probe.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.381-383
• /
• 2013

This paper introduces what the interactive projection technology is, and how to use this technology to make a musical instrument. There have been many art works and business products completed by the interactive projection technology, but this technology seldom has been used in the musical field, so we want to make a simple instrument by interactive projection technology, and expect more people to develop this field in the future.