• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.3-6
• /
• 2007

The Light brightness is to enhance the luminescence efficiency of phosphor including conductive material. In preparing the anode layer, phosphors mixed with conductive material prepared with pastes of polymer resin using by screen printing method. When the prepared anode layer bombarded by cold electron from emitter of cathode, it give rise to form the secondary electron from those of conductive materials such as ITO powder. Furthermore, we are expect to enhance the luminescence efficiency more than without conductive material.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.10-12
• /
• 1998

Si FEA 로부터 tip의 표면을 Ti금속으로 silicidation한 새로운 2극형 Ti-실리사이드 FEA를 제작하고 이의 전계방출 특성을 Si FEA의 경우와 비교하였다. 양극과 음극간의 거리를 10$\mu\textrm{m}$로 유지하고 $10^{-8}$Torr의 고진공 상태에서 측정한 실리사이드 FEA의 turn-on전압은 약 40V로, 전계방출전류와 정상상태 전류 변동율은 150V의 바이어스 아래에서 약 3x$10^{-2}$ $\mu$A/tip와 0.1%min로 나타났다. Ti-실리사이드 FEA는 Si FEA에 비해 낮은 turn-on 전압, 높은 전계방출전류 및 고내구특성을 나타내었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.28-28
• /
• 2001

능동제어형 전계방출 디스플레이의 전자공급원으로서 능동제어형 전계 에미터 어레이의 회로모델이 제안되었다. 능동제어형 전계 에미터 어레이는 전계방출을 안정화시키고 저전력구동을 위한 수소화 된 비정질 실리콘 박막 트랜지스터와 Spindt형 Mo 전계 에미터 어레이로 구성되었고 같은 유리기판 위에 제작되었다. 비정질 박막 트랜지스터와 Spindt형 Mo 전계 에미터 어레이의 전기적 특성으로부터 추출된 기본 모델 변수는 제안된 능동제어형 전계 에미터 어레이 회로모델에 입력되었고 SPICE 회로 시뮬레이터를 사용하여 특성을 분석하였다. 제작된 소자의 측정값과 DC 시뮬레이션 결과를 비교한 결과 두 값이 상당히 일치함으로써 등가회로 모델의 정확성을 확인하였다. 또한 제작된 소자의 transient 시뮬레이션 결과 전계 에미터 어레이의 게이트 커패시턴스와 TFT의 구동능력이 반응시간에 가장 크게 영향을 끼치고 있음을 확인하였다. 제작된 능동제어형 전계방출 에미터 어레이는 pulse width modulation으로 구동하는 경우 15㎲의 반응시간을 얻었고 이 값으로는 4bit/color의 계조(gray scale)표현이 가능하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.137-140
• /
• 2006

The prototype of the field emission display with carbon nanotube emitter is developed in this study. To improve the brightness and color gamut of the prototype, new phosphor material, $SrGa_2S_4:Eu$, is adopted instead of conventional CRT-green phosphor. By replacing the green phosphor, the prototype shows significant improvements in the brightness and color gamut. At the anode voltage of 7 kV and the anode current of $2{\sim}3\;{\mu}A/cm^2$ the brightness is higher than $600\;cd/m^2$. The luminous efficiency of the prototype is about 7.7 lm/Watt.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1008-1011
• /
• 2005

In this study, the field emission display with carbon nanotube emitter is developed for the large size HDTV application. Two structures for electron beam focusing are developed on the typical top-gate cathode. The metal grid and focusing gate structure are proved to be effective for the focusing. The data switching voltage for the double gate structure is lower than 30V which is competitive value in respect of the cost for driver electronics. The brightness and color gamut are comparable to those of the commercial product such as CRT.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1470-1473
• /
• 2005

We proposed new triode-type Field Emitter Arays using Carbon NanoTubes(CNT-FEAs) as electron emission sources at low electric fields. The CNTs were selectively grown on the patterned catalyst layer by Plasma-Enhanced Chemical Vapor Deposition (PECVD). In this structure, gate electrodes are located underneath the cathode electrodes and extracted gate is surrounded by CNT emitters. Furthermore, in order to control density of CNTs, we investigated effect of using rapid thermal annealing (RTA).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.456-461
• /
• 2007

In this study, a surface treatment method using accelerated Ar ions was experimented for exposing the carbon nanotubes (CNT) from the screen-printed CNT paste. After making a cathode electrode on the glass substrate, photo sensitive CNT paste was screen-printed, and then back-side was exposed by UV light. Then, the exposed CNT paste was selectively remained by development. After post-baking, the remained CNT paste was bombarded by accelerated Ar ions for removing some binders and exposing only CNTs. As results, the field emission characteristics were strongly depended on the accelerating energy, bombardment time, and the power of RF plasma ion source. When Ar ions accelerated with 100 eV energy from the 100 W RF plasma source are bombarded on the CNT paste surface for 10 min, the emission level and the uniformity were best.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.685-688
• /
• 2002

In this paper, it is reported that the anode current changes at the constantly applied gate voltages and the current-voltage (I-V) characteristics of Si, Co silicide and Mo silicide field emitter arrays (FEAs) depending on vacuum level from a $10^{-9}$ torr to a $10^{-6}$ torr. The mechanism of the robustness of anode current degradation of Mo silicide FEAs under poor vacuum conditions can be explained by the model of tolerance for the oxygen adsorption and oxidation at the silicide surface. Also, we present the changes of emitting area and work function of the emitters according to vacuum level.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.57-62
• /
• 1997

Green-emitting $ZnGa_2O_4$ : Mn phosphors were synthesized by a thermal method and their low-voltage cathodoluminescent characteristics were examined for the field emitter display (FED) application. Low efficiency of $ZnGa_2O_4$ : Mn phosphors could be ascribed to the low penetration depth of into phosphors, which might results in charge accumulation on the phosphors screen. For increasing cathodoluminescent of $ZnGa_2O_4$ : Mn under low voltage excitation, wide band-gap oxide materials were added to the $ZnGa_2O_4$: Mn powder. It is found that the luminance can be increased by 20%. Measurement of leakage current on the phosphor screen shows that the enhancement of low-voltage cathodoluminescent by additive materials is mainly due to the consumption of surface charges on the phosphor.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.9
• /
• pp.662-664
• /
• 1999

We fabricated AC-TFEL device having cone-shaped Si micro-tip reflector array based on the process which have been conventionally employed for the Si-tip field emitter array in FED system. As a result, the AC-TFEL device having a new geometrical structure could generate well concentrated visible white-light from 3600 reflectors/pixel under bipolar pulse excitation mode only by edge-emission mechanism.