• The Korean Journal of Applied Statistics
• /
• 제10권1호
• /
• pp.15-27
• /
• 1997

Randomized block design (RBD) with three replication is very frequently adopted in agricultural experiments of the Rural Development Administration of Korea. Even though it works well in field trials of traditional crops, it may not accomodate trial site conditions and/or experimental environment. In this research report, we deal with two such cases. The first case is for a crop experiment in green houses. In house conditions, RBD may not be appropriate since it cannot reflect two directions of the yield gradient. So, a Latin square design is suggested as an alternative. The second case is for local field experiments of the newly-inbred rice. RBD with three replications is used without doubt for decades, even though the site layout is not appropriately shaped for the design. In this case, we suggest the RBD in two blocks with multiple replicates for control varieties as an alternative. To improve the quality of statistical experimental designs in over one-thousand agricultural trials performed annually in the Rural Development Administration, we need to re-train agricultural researchers on the design and analysis of experiments and call for concerns of Korean statisticians.

• Journal of Environmental Science International
• /
• 제6권5호
• /
• pp.417-423
• /
• 1997

The objective of this study Is to supply basic data for large reservoir sedimentation research In future and make suggestions to maintain and opera능 the reservoir more of efficiently. At first, previous studios about the estimation of sediment yield rate were reviewed in Korea. And the discharge rating curves of upstream stage gauging stations and the correlation between dam Inflow and stage discharge were analyzed. With the analysis results, the spec유c sediment rate of Soyanggang dam was estimated as 608 m3/km2/yr. It was similar to that of Soyanggang dam feasibility study and 1994's field surveys of the reservoir than that of 1983's field surveys. Because the sediment rating curves were derived under the low discharge conditions, It needs to be checked under the flood conditions. However, the suggested methods such as flowrate analysis and sediment estimation will be useful to the sediment studios In future. Key words . reservoir sediment, sediment yield rate, rating curve, flowrate analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제61권10호
• /
• pp.1426-1431
• /
• 2012

This paper analyzes re-degaussing performances of various breakdown conditions of degaussing coils in a ship to reduce underwater magnetic field anomaly due to the hull magnetization induced under the Earth's magnetic field. To achieve this, first, it is implemented to optimize degaussing coil currents by a magnetomotive force sensitivity formula combined with the coil effects. The re-degaussing processes are then executed when a breakdown occurs in degaussing coils, one by one. Finally, the re-degaussing performances are examined with the results of normal degaussing and coil breakdown conditions.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제59권1호
• /
• pp.89-95
• /
• 2010

A new live-line insulator tester was developed to detect faulty insulators in 154kV power transmission lines. This paper is the second part of the two-part paper and deals with its inspection algorithm development. Unlike normal condition with low pollution and low humidity, the inspection data measured in the field under high pollution or high humidity showed that the voltage distribution of an insulator string has offsets in comparison with those of others and its insulation resistances are greatly decreased, which leads to wrong results of the existing inspection algorithms under such conditions. To solve this problem, we propose new diagnosis algorithms that can exactly detect faulty insulators from measured data regardless of environmental conditions. Its effectiveness was validated by live-line field tests in actual power lines.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.211-218
• /
• 1998

A variable flow-controlled boom sprayer was developed and evaluated. Field tests were conducted to evaluate the adoptability of the sprayerr with optimal conditions. Negative response time was obtained from the field test because pump and PTO were interlocked with the speed of sprayer. Another reason for the negative value was due to the definition of the response time. With constant on-time control, the system was unstable at the conditions of small tolerance and long control interval. The performances of the spray system were stable and accurate. The stable and synchronous responses were achieved with a variable on-time control. The flow control system with an optimal condition (1.0 sec of control interval, 2 of damping ratio, 1% of tolerance) provided the proper performance for uniform spraying. A standard operating procedure of the flow compensating boom sprayer for the ground speed variation was presented and recommended.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제19권2호
• /
• pp.177-182
• /
• 1999

This research was carried out in a farm situated in Malkara District of Tekirdag Province (Turkey) in 1994-95, and the effect of genotype and environmental conditions on some characters and variations of these characters in terms of silage yield in 8 dent corn varieties were determined. The results of this research showed that leaf weight, stem diameter, and silage yield had a low broad sense heritability while the number of leaves per plant had a high heritability. Yield performance of varieties varied to a significant degree because of variations in rainfall rate during the growing periods. Leaf number, silage yield, leaf weight, stem diameter, plant height and ear weight varied between 13.33-17.33 number, 8,443-11,114 ton/hec, 152.8-244.2 g, 2,615-2,965 cm, 216.5-252.5 g and 176.2-285.8 g, respectively.

• Advances in aircraft and spacecraft science
• /
• 제7권1호
• /
• pp.19-40
• /
• 2020

In the present study, a fifth-order shear and normal deformation theory using a polynomial function in the displacement field is developed and employed for the static analysis of laminated composite and sandwich simply supported spherical shells subjected to sinusoidal load. The significant feature of the present theory is that it considers the effect of transverse normal strain in the displacement field which is eliminated in classical, first-order and many higher-order shell theories, while predicting the bending behavior of the shell. The present theory satisfies the zero transverse shear stress conditions at the top and bottom surfaces of the shell. The governing equations and boundary conditions are derived using the principle of virtual work. To solve the governing equations, the Navier solution procedure is employed. The obtained results are compared with Reddy's and Mindlin's theory for the validation of the present theory.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.192-198
• /
• 2004

A numerical study was conducted to determine the effects of high temperature air, including equivalent ratio on flow field, temperature, evaporation, and overall temperature distribution in gas turbine combustor. A sector model of a typical wall jet can combustor, featuring introduction of primary air and dilution air via wall jet, was used in calculations. Flow field and temperature distribution were analyzed. Operating conditions such as inlet temperature and overall equivalent ratio were varied from 373 to 1300 K, and from 0.3 to 0.6, respectively, while any other operating conditions were fixed. The RNG ${\kappa}-{\varepsilon}$ model and eddy breakup model were used for turbulence and combustion model respectively. It was found that the increase with the inlet air temperature, velocity in the combustor is accelerated and evaporation of liquid fuel is not affected in primary zone, high temperature inlet air enhances the evaporation and improves overall temperature distribution factor.

• Proceedings of the Safety Management and Science Conference
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.69-78
• /
• 2009

The goal of this study is to propose the effective method of investigating the injurious factors and making improved plans that prevents the workers against musculoskeletal disorders at an autoparts company and the same business field with similar working conditions and process. A questionnaire were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an ergonomic assessment method such as RULA, OWAS were performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the autopart company and the same business field with similar working conditions and process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1199-1204
• /
• 2005

The purpose of field monitoring system in KHC-Test Road located at Joongbu-Inland Highway, is to provide the performance data for traffic and environmental loadings from pavement surface. Among them, water content reflectometers(WCR) are used to measure the volumetric water content of subgrades soils used in test roads. However, most of the WCRs are not well-calibrated based on the field conditions. In this study, the laboratory based test is performed at various density conditions to evaluate the volumetric water content in subgrade Soils with a WCR. Based on the laboratory testings, the effect of density on WCR measurement are well evaluated for predicting the volumeric water content.of subgrades soils in KHC-Test road.