• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1069-1072
• /
• 2009

Field sequential display has some advantages but color breakup (CBU) is the significant problem. Many researches had introduced several methods to reduce CBU phenomenon, however there are no reliable methods to measure the degree of CBU. In this report, a novel CBU measurement technique which was based on the image processing method and subjective analysis results had proposed to evaluate the degree of CBU. Color Breakup Index (CBI) was presented to be a useful index to recognize the CBU phenomenon in the different field sequential technique displays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.121-124
• /
• 2005

A field-sequential color projection system can display color images using panel. However, it suffers from a characteristic trichromatic separation known as "color breakup". The viewing of images exhibiting color breakup may cause visual fatigue and mental stress. In this study, the authors examine, from the standpoint of human factors, the objective and subjective symptoms that can result from the viewing of images with color breakup.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.777-782
• /
• 2014

This paper proposes an RGB to RGBY color conversion algorithm for liquid crystal display (LCD) using RGW pixel structure with two-field (yellow and blue) sequential driving method. The proposed algorithm preserves the hue and saturation of the original color by maintaining the RGB ratio, and it increases the luminance. The performance of the proposed RGBY conversion algorithm is verified using the MATLAB simulation with 24 images of Kodak lossless true color image suite. The simulation results of average color difference CIEDE2000 (${\delta}E^*_{00}$) and scaling factor are 0.99 and 1.89, respectively. These results indicate that the average brightness is increased 1.89 times compared to LCD using conventional RGB pixel structure, without increasing the power consumption and degrading the image quality.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.233-234
• /
• 2006

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.294-295
• /
• 2006

Field sequential liquid crystal display (FSLCD) has advantages such as a high transmittance due to no use of color filter and high color reproductivity because of LED backlight for a luminance source. However, to realize FSLCD response time of the LCD must be below 5ms. In this paper, we have chosen electrically controlled birefringence (ECB) mode for this application and studied film compensation to improve the operating voltage and viewing angle and to achieve a fast response time optimizing the condition of the discotic film and TAC film, operating voltage decreases to 5V, and viewing angle range is $160^{\circ}$ at horizontal and vertical direction, respectively and $120^{\circ}$ in diagonal direction. (contrast ratio > 10:1) and optimized cell exhibits a fast response time of 4ms in most grey levels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.483-484
• /
• 2005

The field sequential liquid crystal display (FSLCD) does not need a color filter so that it is suitable for high resolution display. However, FSLCD has a drawback which requires a fast response time of sub-5 ms. We have studied the FSLCD with electrically controlled birefringence (ECB) mode. The ECB mode exhibits fast response time, high transmittance, low operating voltage and adequate viewing angle with a help of optical compensation films. In this paper, we present electro-optic characteristics of the ECB mode using a discotic film.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 하계학술대회
• /
• pp.486-488
• /
• 2015

FSC(Field Sequential Color) LCD has high efficiency, high brightness and color saturation due to 3 times aperture larger than conventional LCD. However it is well known that color break-up (CBU) and color interference are hot issue need to be solved. We propose a novel sequential driving method with edge-lit light guide composed of $16{\times}15$ blocks to reduce CBU and color interference. The experimental results show not only suppression of CBU but also the side effects are minimized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1088-1091
• /
• 2009

A boost converter with charge-recycling technique fabricated by $0.25{\mu}m$ CMOS BCD process can provide different supply voltages to drive series RGB LEDs in sequence for reducing the power consumption on the constant current generator. The proposed technique stores and restores extra energy to improve the efficiency, as well as enhances the reference tracking response. Experimental results show that the period of reference-tracking response can be improved. When the load current is 100mA, the periods of reference down-tracking and uptracking are smaller than $10{\mu}s$ and $20{\mu}s$, respectively. Experimental results demonstrate fast and efficient reference tracking performance is achieved.

• 대한전자공학회논문지SP
• /
• 제41권1호
• /
• pp.21-28
• /
• 2004

내용기반 영상검색 분야에서 색, 질감, 모양 등과 같은 영상의 시각적인 내용을 표현하기 위하여 수치화한 특징들이 많이 제안되었다. 이런 특징들은 모두 독립적이라고 가정하기 때문에 한 특징 벡터를 추출할 때는 다른 특징들과의 상관성을 전혀 고려하지 않는다. 이 논문에서는 색과 질감 사이의 관계를 고려하여 새로운 CCE(channel color energy) 특징을 제안한다. 자연 영상을 대상으로 한 실험결과를 분석한 결과 제안하는 방법이 정규 가중거리 비교 방법과 SCFT(sequential chromatic Fourier transform) 기반 색 질감 방법에 비해 우수한 성능을 보이는 것을 확인할 수 있었다.

• 대한원격탐사학회지
• /
• 제26권2호
• /
• pp.209-220
• /
• 2010

해양현상을 이해하기 위한 관측분야의 노력 중에서 해류 정보의 생산은 가장 어려운 작업 중의 하나이다. 이를 극복하기 위한 대안으로서 연속 화상 자료로부터 해류벡터를 추정하려는 많은 연구들이 진행 되고 있다. 본 연구에서는 한반도 주변의 SeaWiFS (Sea-viewing Wide Field-of-view Sensor) chlorophyll-a 해색 자료와 AVHRR/SST 를 이용하여 연속 화상 사이의 유사한 형태를 추적하는 최대상 관계수법을 사용한 표층 유속 벡터의 추정을 시도하였다. 한국의 남해역에서 적용한 유속 벡터 결과는 해면 고도계를 이용한 지형류, ADCP 관측 결과와 비교하여 유속은 약 15% 정도 작고, 유향은 약 $36^{\circ}$의 차이로 근접하여 기존 연구 결과에 비해 양호하게 나타났다. 이는 향후 GOCI 자료의 응용적 측면에서 매우 고무적이다.