• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.157-162
• /
• 2002

A technique which could collect the traditional and the industrial hanji fibrous sludge efficiently from wastewater using a cationic surfactant cetyltrimethylammonium chloride (CTAC) was developed. When the concentration of CTAC was $1{\mu}g/mL$ in wastewater that the amount of the traditional hanji fibrous sludge was about 0.08 g/L, the collecting yield was more than 95% and the collecting time was less than 30 sec. When only CTAC was used to collect the industrial hanji fibrous sludge, about 90% of collecting yield was obtained at more than $15{\mu}g/mL$ CTAC. But the sludge layer at the surface of solution was not stabilized and the flotation time was relatively longer. And, when $5{\mu}g/mL$ CTAC and various amount of PAMID$^{(R)}$ was added to the industrial hanji sludge, the collecting yield was increased and sludge layer also was more stabilized. But the collecting yield was higher in the traditional hanji sludge than in the industrial hanji sludge.

• Analytical Science and Technology
• /
• v.14 no.2
• /
• pp.167-172
• /
• 2001

The technique that could collect efficiently the hanji fibrous sludge from wastewater using surfactants was developed. When fibrous sludge of which concentration was about 80mg/L, was floated and collected, the optimum concentration of sodium oleate, the pore size of glass filter and the air flow rate were 10mg/L, $5-10{\mu}m$ and 200mL/min., respectively. The behavior of sodium oleate might be interfered by polyvalent cations such as $Ca^{2+}$. But when the concentration of $Ca^{2+}$ was less than 100mg/L, the interference effect did not appear. And when a typical cationic surfactant, cetyltrimethylammonium bromide(CTAB), was used, the collecting yield was less than that of sodium oleate, and the amount of foam was higher than sodium oleate. When 1mg/L of CTAB was added to the hanji sludge sample contained 1mg/L of $PAMID^{(R)}$, a dispersant, fibrous sludge was effectively coagulated, the flotation time was very short and the collecting yield was above 95%. But in the case, sodium oleate was inefficient.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.318-325
• /
• 1999

Sludges from the wastewater of hanji production were analysed to see that sludges from the bleaching process, the bleach washing process, and the paper preparation process were fibrous, while sludges from the process cooking with NaOH and the process of final chemical and microbiological treatment were non-fibrous. Sludge solution from the bleaching process had the most amount of solid matters. Sludges from the bleaching process, the bleach washing process, and the final chemical and microbiological treatment process contained about 80-90 %(w/w) moisture. Owing to hypochlorite ion, pH of sludge from the bleaching process was higher than any other sludge samples. The inorganic components of sludges were determined by ICP-AES. The major inorganic component of sludge from the process cooking with NaOH was Na, while the sludge from the bleaching process had Na and Ca, major components in the final chemical and microbiological treatment process were Ca and Al. Trace amount of Mg, Fe, K, P, Mn and Ti were observed in sludges. Sludge from the bleaching process had ashes more than any other sludges. Shape of sludges observed by SEM was appeared to fibrous or crystalline, and the breadth of fibrous sludge was $5{\sim}50{\mu}m$. The sludge from the bleaching process had the most amount of matters soluble by cold and hot water and by alcohol-benzene.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.351-356
• /
• 2000

The decolorization of wastewater and the collecting conditions of final sludge from hanji production were investigated. Black wastewater (50 mL) from the process cooking with NaOH could be effectively decolorized by 2.0 g of $Ca(OCl)_2$ So, if excess bleach $Ca(OCl)_2$ used in bleaching process were recycled, the decolorization of wastewater by adding less $Ca(OCl)_2$ would be successfully realized. However, the decolorization by electrolyzed oxidation was ineffective. The final sludge could be effectively collected by polymer coagulator, but the addition of $Al_2(SO_4)_3$ was required, and the pure fibrous sludge could not be collected. Therefore, surfactants such as triethanolamine and Triton X-100 were used instead of polymer coagulator. The collecting yield was obtained about 85% as good as those by polymer coagulator. When mixed surfactants were used in collecting the final sludge, $Al_2(SO_4)_3$ was not required. In addition, as the pure fibrous sludge could be collected, the effective recycling of sludges would be done.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.44-44
• /
• 2004

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.99-104
• /
• 1987

Fiber mats were made at various density levels, using fibers from papermill sludge, ricestraw and various mixtures of the two. The paper mill sludges were collected from Moorim Papermill Co, and Jeonjoo Papermill Co. They were soaked in the liquid sulfur compounds, sulfur-tall oil and sulfurpolyester compounds, and made into fiber-reinforced, sulfur-based composition board. Under optimum conditions of fiber mat preparation and saturation with molten sulfur and modified sulfur, the Young's moduls of the manufactured tiber-reinforced composition board are superior to those of conventional wood-based composition boards. For example, the moduli of elasticity of the composition board made from papermill sludge, with a density of 0.40gm/$cm^3$, were greater than 1,400,000psi as compared 800,000psi for high density hardboard(1.28gm/$cm^3$). The modulus of rupture of the best reinforced composition board manufactured was over 9000psi, comparable to 6000psi of high density hardboard. The proposed Bryant and Lee's theory, "Modified Rule of Mixtures" can be applicable to the nonoriented and short fibrous composition board, when it was modified from "Rule of Mixtures" established by Paul an Jones, and supplemented by Smith and Cox's theory, In the Bryant and Lee's theory of $E_c=\frac{1}{3}aE_fV_f+bE_mV_m$, the constants "a" and "b" for the composition boards made from papermill sludge and the mixtures of ricestraw and the sludge were identified to be in the ranges of 3.29~3.54 and -2.47~-2.80 respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.95-102
• /
• 1997

The process which can stabilize water quality of treatment and improve nitrogen removal rate under the condition of high organic loading was developed by charging fibrous HBC media to single sludge nitrification-denitrification process. This process was operated easier, minimized the treatment cost, and shortened the retention time. To improve T-N removal rate, a part of nitrifing liquid at aerobic zone was recycled to anoxic zone by approximate internal recycle ratio. The experimental results are as follows ; T-N removal efficiency in the organic volumetric loading 0.14-0.19 kg/COD/m$^{3}$·d was obtained asmaxium of 85% at internal recycle ratio 2.5 and in more ratio than this it was decreased. Organic removal efficiency was about 91% under the overall experimental conditions and not influenced by recycle ratio.