• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.73-80
• /
• 2005

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.184-188
• /
• 2015

There is a need for light weight and high stiffness characteristics in the building structure as well as aircraft and cars. So fiber reinforced plastic with the addition of reinforcing agent such as glass fiber, carbon fiber, aramid fiber is utilized in this regard. In this study, mechanical strength, flow property and part shrinkage of glass fiber and carbon fiber reinforced PA6 were examined according to reinforcement content such as 10%, 20%, and 30%, and reinforcement type. The mechanical property was measured by a tensile test with specimen fabricated by injection molding and the flow property was measured by spiral test. In addition, we measured the part shrinkage of fiber reinforced PA6 that affects part quality. As glass fiber content increases, mechanical property increased by 75.4 to 182%, and flow property decreased by 18.9 to 39.5%. And part shrinkage decreased by 52.9 to 60.8% in the flow direction, and decreased by 48.2 to 58.1% in the perpendicular to the flow direction. As carbon fiber content increases, mechanical property increased by 180 to 276%, flow property decreased by 26.8 to 42.8%, and part shrinkage decreased by 65.0 to 71.8% and 69.5 to 72.7% in the flow direction and the direction perpendicular to the flow respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.665-668
• /
• 2006

Concrete secondary product that use cement is increasing application from reason of shortening etc.. of construction period in construction site. Manufacture method of construction of this concrete secondary product there is hot-check method, direct spray method, press method, extrusion molding method etc.. Also, I am using reinforcement boating certainly in this process. In most case, We have used asbestos by reinforcement fiber until early 90s but use from human body hurtfulness controversy is felt constraint. Therefore, application of principal parts fiber is increasing. But, to replace asbestos, because must satisfy all lubricating ability, productivity etc.. class, it is the very difficult matter to replace asbestos. In this study, I wished to do Test about asbestos principal parts possibility at extrusion process to charge shape or form making test piece because mixs polypropylene fiber etc. by plan that replace asbestos in cement extrusion molding product and measures bending strength and elasticity.

• Journal of the Korean Wood Science and Technology
• /
• 제50권2호
• /
• pp.93-103
• /
• 2022

Currently, biofibers are used as a reinforcement in polymer composites for structural elements and construction materials instead of the synthetic fibers which cause environmental problems and are expensive. One of the chemicals with a pH close to neutral that can be potentially used as a modified fiber material is sodium chloride (NaCl). Therefore, this study aims to investigate the characteristics of a composite board made from NaCl-treated kenaf fiber. A completely randomized design method was used with consideration of two factors: the content of NaCl in the treatment solution (1 wt%, 3 wt%, and 5 wt%) and the duration of immersion of fibers in the solution (1 h, 2 h, and 3 h). The NaCl treatment was conducted by soaking the fibers in the solution for different durations. The fibers were then rinsed with water until the pH of the water reached 7 and subsequently dried inside an oven at 80℃ for 6 h. Kenaf fiber and epoxy were mixed manually with the total loading of 20 wt% based on the dry weight of the fiber. Physical and mechanical properties of the fibers were then evaluated based on JIS A 5908 particleboard standards. The results showed that increasing NaCl content in the fiber treatment solution can increase the physical and mechanical properties of the composite board. The properties of fibers treated with 5 wt% NaCl for 3 h were superior with a modulus of elasticity of 2.085 GPa, modulus of rupture of 19.77 MPa, internal bonding of 1.8 MPa, thickness swelling of 3%, and water absorption of 10.9%. The contact angle of untreated kenaf fibers was 104°, which increased to 80° and 73° on treatment with 1 wt% and 5 wt% NaCl for 3 h, respectively.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.1-25
• /
• 2003

geosynthetles -A manufacturerl synthetic product used with soil, rock or other materials to enhance the performance of geotechnical works geotentiles - A permeable textile product used in contact with a soil for separation, filtration, reinforcement and drainage geemembranes - A synthetic low permeability material used as liner in geotechnical applications. (omitted)

• 패션비즈니스
• /
• 제22권1호
• /
• pp.41-55
• /
• 2018

The purpose of this study was to investigate the trends of product design for textile convergence wearable smart textile fashion products according to college students' fashion life style. In this study, we used information obtained from a questionnaire issued to 201 female college students who were 20 years old for the final analysis. The questionnaires were to classify female college students groups according to the fashion life style, to examine characteristics, needs and wants of each group. The survey on the tendency of wearable smart textiles consisted of 22 items about concept and type of smart clothing product, functional material and intelligent material, recognition, preference, purchase intention, purchase factor and brand preference tendency. A total of 201 samples were analyzed by factor analysis, cluster analysis, ANOVA, crosstabs and $x^2-test$ using SPSS package program. 'brand preference oriented type was found to be interested in 'wearable' smart clothing product with monitoring function of bio-signal' and 'high functional fiber and textile product', but the credibility of 'smart clothes that can be worn and smart textile products to be useful in modern life' was low. 'fashionable individuality oriented' type showed interest in 'smart clothing and smart product', 'intelligent fiber' and 'wearable smart clothing product with monitoring function of bio-signal', but the preferences of 'light emitting fiber products' was low. 'practically purchasing-oriented' type was very interested in 'high-functional fiber and its textile products', but had inadequate knowledge on 'smart clothing and smart textile product' and showed low interest. Despite the fact that 'wearable smart clothing and smart textile products' are expensive, they were willing to purchase considering practicality and sophisticated style.

• Korean Journal of Mathematics
• /
• 제23권4호
• /
• pp.733-740
• /
• 2015

In this paper, we prove the existence of warping functions on Riemannian warped product manifolds with some prescribed scalar curvatures according to the fiber manifolds of class (B).

• 호남수학학술지
• /
• 제36권3호
• /
• pp.597-603
• /
• 2014

In this paper, we prove the existence of warping functions on Riemannian warped product manifolds with fiber manifold of class (B) having some prescribed scalar curvatures.

• 충청수학회지
• /
• 제28권4호
• /
• pp.591-602
• /
• 2015

In this paper, we prove the existence and the nonexistence of warping functions on Riemannian warped product manifolds with some prescribed scalar curvatures according to the fiber manifolds of class (A).

• 호남수학학술지
• /
• 제36권1호
• /
• pp.1-9
• /
• 2014

In this paper, we investigate some properties in commutative diagrams with fiber products of three modules.