1 |
S. N. Hwang, "Development Trends of Functional Composite Materials", KISTI, Tech. Trend Report (2003).
|
2 |
M. Lee, J. H. Kim, S. R. Park, and M.-Y. Lyu, "A Study on the Warpage in Injection Molded Part for Various Part Designs and Non Reinforced Resins", Elast. Compos., 44, 373 (2009).
|
3 |
D. M. Moon, T. G. Choi, and M.-Y. Lyu, "Prediction of Mechanical Property of Glass Fiber Reinforced Polycarbonate and Evalution of Warpage through Injection molding", Polymer(Korea), 38, 708 (2014).
|
4 |
M.-Y. Lyu and T. G. Choi "Research Trends in Polymer Materials for Use in Lightweight Vehicles", Int. J. Precis. Eng. Manuf., 16, 213 (2015).
DOI
|
5 |
J.-H. Mo and M.-Y. Lyu, "Investigation of the Part Shrinkage in Injection Molding for Glass Fiber Reinforced Thermoplastics", Trans. Mater. Process., 13, 515 (2004).
DOI
ScienceOn
|
6 |
Y. S. Kim and I. K. Kim, "Effect of Glass Fiber Contents on the tensile Strength in Injection Molding Process", J. Korean Soc. Prec. Eng., 17, 63 (2000).
|
7 |
M. Lee, H. Kim, and M.-Y. Lyu, "A Study on Warpage of Glass Fiber Reinforced Plastics for Part Design and Operation Condition: Part 1. Amorphous Plastics", Polymer(Korea), 36, 555 (2012).
|
8 |
M. Lee, H. Kim, and M.-Y. Lyu, "A Study on Warpage of Glass Fiber Reinforced Plastics for Part Design and Operation Condition: Part 2. Crystalline Plastics", Polymer(Korea), 36, 677 (2012).
|
9 |
W. C. Jung, Y. M. Heo, K. H. Shin, G. S. Yoon, S. H. Chang, and M. Y. Kim, "An Experimental Study on Molding Factor for Spiral Type Micro injection Product", Trans. Mater. Process., 15, 65 (2006).
DOI
|
10 |
ASTM D 638-10 "Standard Test Method for Tensile Properties of Plastics", ASTM Annual Book (2010).
|
11 |
ASTM D 3123-98 "Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds", ASTM Annual Book (1998).
|
12 |
ASTM D 955-00 "Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics", ASTM Annual Book (2000).
|
13 |
M. A. Lee and M.-Y. Lyu, "A Study on the Part Shrinkage in Injection Molded Annular Shaped Product for Glass Reinforced Polycarbonate", Elast. Compos., 48, 300 (2013).
DOI
|
14 |
S. T. Won, T. B. Kim, S. Lee, J. M. Won, K. H. Cha, and M.-Y. Lyu, "A Study on the Stress Measurement in a Plastic Product using Chemical Cracking Method", Elast. Compos., 47, 336 (2012).
DOI
|
15 |
M. A. Lee and M.-Y. Lyu, " A Study on the part Shrinkage in Injection Molded Annular Shaped Product for Glass Reinforced Polycarbonate", Elast. Compos., 48, 300 (2013).
DOI
|