• Smart Structures and Systems
• /
• 제8권3호
• /
• pp.303-320
• /
• 2011

Comparing to active damage monitoring, impact localization on composite by using time reversal focusing method has several difficulties. First, the transfer function of the actuator-sensor path is difficult to be obtained because of the limitation that no impact experiment is permitted to perform on the real structure and the difficulty to model it because the performance of real aircraft composite is much more complicated comparing to metal structure. Second, the position of impact is unknown and can not be controlled as the excitation signal used in the active monitoring. This makes it not applicable to compare the difference between the excitation and the focused signal. Another difficulty is that impact signal is frequency broadband, giving rise to the difficulty to process virtual synthesis because of the highly dispersion nature of frequency broadband Lamb wave in plate-like structure. Aiming at developing a practical method for on-line localization of impact on aircraft composite structure which can take advantage of time reversal focusing and does not rely on the transfer function, a PZT sensor array based phase synthesis time reversal impact imaging method is proposed. The complex Shannon wavelet transform is presented to extract the frequency narrow-band signals from the impact responded signals of PZT sensors. A phase synthesis process of the frequency narrow-band signals is implemented to search the time reversal focusing position on the structure which represents the impact position. Evaluation experiments on a carbon fiber composite structure show that the proposed method realizes the impact imaging and localization with an error less than 1.5 cm. Discussion of the influence of velocity errors and measurement noise is also given in detail.

• 마이크로전자및패키징학회지
• /
• 제24권4호
• /
• pp.19-22
• /
• 2017

본 논문에서는 방대한 양의 데이터를 전송하기 위한 고분자 광도파로를 기반으로 한 집적 평면형 다중모드 $1{\times}N$ 광 분배소자의 구조를 제안하였다. 두 개의 상이한 모양의 테이퍼 형 광도파로를 이용하여 광의 모드 변환 특성을 분석하고, 넓은 파장 영역에도 동작이 가능한 광분배기 구조를 설계하였다. 일반적인 광 분배기 구조는 Y-branch를 나열하는 형태와 Mach-Zehnder 및 커플러 형태로 제작되고 있으나, 분기부가 반복되면서 광 손실이 증가하는 문제가 있다. 해결 방안으로 본 연구에서 제안되는 구조는 Y-branch를 배열하지 않는 구조를 제안하여 분기부에 대한 손실을 줄이고, 출력단의 광의 세기가 균일하게 출력되는 해결방안을 제안하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권3호
• /
• pp.290-302
• /
• 1994

This study was aimed to clarify the histopathological changes in the experimental animal model subjcted to rigid fixation performed across the frontonasal sutrue in growing rabbits. Sixteen rabbits aged 6 weeks used. In experimental group(n=12), rigid fixation with miniplates and screws was performed across the frontonasal suture. Control group(n=4) was those with periosteal elevation only. Experimental animals were sacrificed on the 2nd, 4th, 8th, and 12th week after operation, and frontonasal suture area was excised for light microscopic and scanning electron microscopic examination. The results obtained were as follows : 1. In control groups, collagen fiber bundles ran in the midportion of bone sutrue and cambial layers were seen at bone surface. Sutural surfaces are beveled and external and internal bony projected portions were observed. 2. In experimental groups, distance of bone suture was decreased by new bone formation on the 2nd week, while increased by bone resorption at the miniplate applied area and bone formation in the adjacent bone on the 4th week. 3. In experimental groups, the original bone surface was almost resorbed and new bone formation was found on the 8th week. Regulary-run collagen fibers, smooth and dense bone surfaces were similar to the bone patterns of control groups on the 12th week. Above results suggest that bone formation is restricted where the miniplate is applied, while compensatory growth is appeared in the adjacent bont. It is considered that rigid fixation with miniplates and acrews results in a little disturbance of sutural growth of the craniofacial bone in infancy and children when applied for short duration.

• Carbon letters
• /
• 제24권
• /
• pp.82-89
• /
• 2017

In this study, composite PAN-based ACNFs embedded with MgO and $MnO_2$ were prepared by the electrospinning method. The resultant pristine ACNFs, ACNF/MgO and $ACNF/MnO_2$ were characterized in terms of their morphological changes, SSA, crystallinity and functional group with FESEM-EDX, the BET method, XRD and FTIR analysis, respectively. Results from this study showed that the SSA of the ACNF/MgO composite ($1893m^2g^{-1}$) is significantly higher than that of the pristine ACNFs and $ACNF/MnO_2$ which is 478 and $430m^2g^{-1}$, respectively. FTIR analysis showed peaks of 476 and $547cm^{-1}$, indicating the presence of MgO and $MnO_2$, respectively. The FESEM micrographs analysis showed a smooth but coarser structure in all the ACNFs. Meanwhile, the ACNF/MgO has the smallest fiber diameter ($314.38{\pm}62.42nm$) compared to other ACNFs. The presence of MgO and $MnO_2$ inside the ACNFs was also confirmed with EDX analysis as well as XRD. The adsorption capacities of each ACNF toward $CH_4$ were tested with the volumetric adsorption method in which the ACNF/MgO exhibited the highest $CH_4$ adsorption up to $2.39mmol\;g^{-1}$. Meanwhile, all the ACNF samples followed the pseudo-second order kinetic model with a $R^2$ up to 0.9996.

• Composites Research
• /
• 제31권2호
• /
• pp.69-75
• /
• 2018

본 연구에서는 직물 탄소섬유강화플라스틱 복합재를 직교 격자 형상으로 적층한 패널 구조를 제안하고, 기계적 특성에 대한 분석 및 연구를 수행하였다. 프리프레그를 재단하여 적층하는 방식으로 직교 격자 구조를 제작하였으며, 하부의 적층판과 오토클레이브 공정 일체 성형을 통해 격자 패널 구조를 제작하였다. 본 연구에서는 인장, 압축, 전단, 굽힘 하중을 부가하여 제안된 격자 패널 구조의 거동을 확인하였으며, 이러한 시험을 통해 본 직교 격자 구조물의 강성 증가 효과를 입증하였다. 또한, 유한요소해석 모델을 구축하여 시험 결과와 비교하였으며, 이를 통해 시험과 해석의 타당성을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.76-83
• /
• 2015

본 연구의 목적은 고충진 합성목재를 이용하여 친환경 모듈러 돔 구조시스템을 개발하고 부재와 절점을 모듈화하여 실제 구조체을 제작하는 것이다. 기존의 합성목재에 비해 높은 70% 목분함량 합성목재를 돔 구조모델의 부재로 이용하였고, 정이십면체 기반 지오데직 돔의 기하학적 특성을 분석하여 절점과 부재를 모듈화 하였다. 돔의 제작을 위한 모듈화와 실제 구조물의 제작과정의 연구결과로부터 6가지 절점과 3개의 부재종류의 모듈러 돔에 대한 적용성을 검토할 수 있었다. 또한 해석결과에서 최저차 좌굴모드는 경계부의 절점에서 절점좌굴이 예상되었다.

• Advances in nano research
• /
• 제9권1호
• /
• pp.1-13
• /
• 2020

In this work, the electrical potential (EP) technique with an artificial neural networks (ANNs) for monitoring of nanostructures are used for the first time. This study employs an expert system to identify size and localize hidden nano-delamination (N.Del) inside layers of nano-pipe (N.P) manufactured from Basalt Fiber Reinforced Polymer (BFRP) laminate composite by using low-cost monitoring method of electrical potential (EP) technique with an artificial neural networks (ANNs), which are combined to decrease detection effort to discern N.Del location/size inside the N.P layers, with high accuracy, simple and low-cost. The dielectric properties of the N.P material are measured before and after N.Del introduced using arrays of electrical contacts and the variation in capacitance values, capacitance change and node potential distribution are analyzed. Using these changes in electrical potential due to N.Del, a finite element (FE) simulation model for N.Del location/size detection is generated by ANSYS and MATLAB, which are combined to simulate sensor characteristic, therefore, FE analyses are employed to make sets of data for the learning of the ANNs. The method is applied for the N.Del monitoring, to minimize the number of FE analysis in order to keep the cost and save the time of the assessment to a minimum. The FE results are in excellent agreement with an ANN and the experimental results available in the literature, thus validating the accuracy and reliability of the proposed technique.

• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.159-169
• /
• 2014

이 연구에서는 철근콘크리트 전단벽의 횡하중 거동과 연성을 합리적으로 평가하기 위해서 모멘트-곡률관계를 정립하고 이로부터 단순화된 횡하중-횡변위관계를 제시하였다. 최초 휨 균열, 인장철근 항복, 최대내력, 최대내력의 80% 및 인장철근파단시점에서 모멘트와 곡률은 힘의 평형조건과 변형적합조건으로부터 정립되었다. 최대내력 이후의 곡률평가를 위한 압축측연단 콘크리트 변형률은 Razvi and Saatcioglu의 구속된 콘크리트의 응력-변형률 관계를 이용하여 최대응력의 감소계수와 횡보강근 체적지수의 함수로 제시하였다. 모멘트 평가모델은 변수연구를 통하여 인장철근지수, 수직철근지수 및 축력지수의 함수로 일반화하였다. 횡변위는 전단벽의 높이에 따라 분포된 이상화된 곡률로부터 모멘트 면적법을 이용하여 환산하였다. 제시된 횡하중-횡변위관계는 기존 실험 결과와 잘 일치하였으며, 특히 최대내력 이후의 거동을 잘 평가하였다.

• Preventive Nutrition and Food Science
• /
• 제17권4호
• /
• pp.245-253
• /
• 2012

Collagen tripeptide (CTP) is a functional food material with several biological effects such as improving dry skin and wound and bone fracture healing. This study focused on the anti-photoaging effects of CTP on a hairless mouse model. To evaluate the effects of CTP on UVB-induced skin wrinkle formation in vivo, the hairless mice were exposed to UVB radiation with oral administration of CTP for 14 weeks. Compared with the untreated UVB control group, mice treated with CTP showed significantly reduced wrinkle formation, skin thickening, and transepidermal water loss (TEWL). Skin hydration and hydroxyproline were increased in the CTP-treated group. Moreover, oral administration of CTP prevented UVB-induced MMP-3 and -13 activities as well as MMP-2 and -9 expressions. Oral administration of CTP increased skin elasticity and decreased abnormal elastic fiber formation. Erythema was also decreased in the CTP-treated group. Taken together, these results strongly suggest that CTP has potential as an anti-photoaging agent.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.503-509
• /
• 2013

탄소섬유강화 복합재료는 일반적으로 압축하중과 재료의 면에 수직한 방향의 충격에 매우 취약하다는 단점을 가지고 있다. 특히 항공기의 운항 중 조류와의 충돌이나 정비 중 공구의 낙하로 인한 충격손상은 항공기 구조물의 강도저하의 원인이 된다. 따라서 본 연구에서는 복합재료(CFRP) 시험편에 충격에너지와 충격자 직경을 변화시키면서 충격손상을 가한 후 압축시험을 수행하여 충격후 압축잔류강도를 평가하였으며, 시험 결과를 비교하여 충격에너지에 따른 충격후 압축잔류강도 예측식을 제안하였다.