Browse > Article
http://dx.doi.org/10.12989/anr.2020.9.1.001

Nano-delamination monitoring of BFRP nano-pipes of electrical potential change with ANNs  

Altabey, Wael A. (International Institute for Urban Systems Engineering, Southeast University)
Noori, Mohammad (International Institute for Urban Systems Engineering, Southeast University)
Alarjani, Ali (Department of Mechanical Engineering, College of Engineering in Alkharj, Prince Sattam Bin Abdelaziz University)
Zhao, Ying (International Institute for Urban Systems Engineering, Southeast University)
Publication Information
Advances in nano research / v.9, no.1, 2020 , pp. 1-13 More about this Journal
Abstract
In this work, the electrical potential (EP) technique with an artificial neural networks (ANNs) for monitoring of nanostructures are used for the first time. This study employs an expert system to identify size and localize hidden nano-delamination (N.Del) inside layers of nano-pipe (N.P) manufactured from Basalt Fiber Reinforced Polymer (BFRP) laminate composite by using low-cost monitoring method of electrical potential (EP) technique with an artificial neural networks (ANNs), which are combined to decrease detection effort to discern N.Del location/size inside the N.P layers, with high accuracy, simple and low-cost. The dielectric properties of the N.P material are measured before and after N.Del introduced using arrays of electrical contacts and the variation in capacitance values, capacitance change and node potential distribution are analyzed. Using these changes in electrical potential due to N.Del, a finite element (FE) simulation model for N.Del location/size detection is generated by ANSYS and MATLAB, which are combined to simulate sensor characteristic, therefore, FE analyses are employed to make sets of data for the learning of the ANNs. The method is applied for the N.Del monitoring, to minimize the number of FE analysis in order to keep the cost and save the time of the assessment to a minimum. The FE results are in excellent agreement with an ANN and the experimental results available in the literature, thus validating the accuracy and reliability of the proposed technique.
Keywords
nano pipes; nano-delamination monitoring; Electrical Capacitance Sensor (ECS); BFRP; FEM; ANNs;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Altabey, W.A. (2017f), "EPC method for delamination assessment of basalt FRP pipe: Electrodes number effect", Struct. Monit. Maint., Int. J., 4(1), 69-84. https://doi.org/10.12989/smm.2017.4.1.069
2 Altabey, W.A. (2018), "High performance estimations of natural frequency of basalt FRP laminated plates with intermediate elastic support using response surfaces method", J. Vibroeng., 20(2), 1099-1107. https://doi.org/10.21595/jve.2017.18456   DOI
3 Altabey, W.A. and Noori, M. (2017), "Detection of fatigue crack in basalt FRP laminate composite pipe using electrical potential change method", Proceedings of the 12th International Conference on Damage Assessment of Structures, IOP Conf. Series: Journal of Physics, 842, 012079, Kitakyushu, Japan, July.
4 Altabey, W.A. and Noori, M. (2018a), "Fatigue life prediction for carbon fibre/epoxy laminate composites under spectrum loading using two different neural network architectures", Int. J. Sustain. Mater. Struct. Syst., 3(1), 53-78. http://dx.doi.org/10.1504/IJSMSS.2017.10013394   DOI
5 Altabey, W.A. and Noori, M. (2018b), "Monitoring the water absorption in GFRE pipes via an electrical capacitance sensors", Adv. Aircr. Spacecr. Sci., Int. J., 5(4), 411-434. https://doi.org/10.12989/aas.2018.5.4.411
6 Altabey, W.A., Noori, M. and Wang, L. (2018a), Using ANSYS for Finite Element Analysis: A Tutorial for Engineers, Volume I, Momentum Press, USA (ISBN 978-1-94708-321-9).
7 Yang, W.Q., Beck, M.S. and Byars, M. (1995b), "Electrical capacitance tomography-from design to applications", Meas. Control, 28(9), 261-266. https://doi.org/10.1177/002029409502800901   DOI
8 Zhang, W., Wang, C., Yang, W. and Wang, C. (2014), "Application of electrical capacitance tomography in particulate process measurement - A review", Adv. Powder Technol., 25(1), 174-188. https://doi.org/10.1016/j.apt.2013.12.003   DOI
9 Altabey, W.A., Noori, M., Zhao, Y. and Wu, Z. (2019), "Tensile creep monitoring of BFRP plates via electrical potential change and ANNs", Sci. Iran. Trans B: Mech. Eng. [In press].
10 Altabey, W.A., Noori, M. and Wang, L. (2018b), Using ANSYS for Finite Element Analysis: Dynamic, Probabilistic, Design and Heat, Transfer Analysis, Volume II, Momentum Press, USA (ISBN 978-1-94708-323-3)
11 Zhao, Y., Noori, M., Altabey, W.A., Ghiasi, R. and Zhishen, W., (2018b), "Deep learning-based damage, load and support identification for a composite pipeline by extracting modal macro strains from dynamic excitations", Appl. Sci., 8(12), 2564. https://doi.org/10.3390/app8122564   DOI
12 Zhao, Y., Noori, M. and Altabey, W.A. (2017a), "Damage detection for a beam under transient excitation via three different algorithms", J. Struct. Eng. Mech., 64(6), 803-817. https://doi.org/10.12989/sem.2017.64.6.803
13 Zhao, Y., Noori, M., Altabey, W.A. and Naiwei, L. (2017b), "Reliability evaluation of a laminate composite plate under distributed pressure using a hybrid response surface method", Int. J. Reliabil. Quality Safe. Eng., 24(3), 1750013. http://dx.doi.org/10.1142/S0218539317500139   DOI
14 Zhao, Y., Noori, M., Altabey W.A. and Wu, Z. (2018a), "Fatigue damage identification for composite pipeline systems using electrical capacitance sensors", J. Smart Mater. Struct., 27(8), 085023. https://doi.org/10.1088/1361-665X/aacc99   DOI
15 Zhao, Y., Noori, M., Seyed, B.B. and Altabey, W.A. (2018c), "Mode shape-based damage identification for a reinforced concrete beam using wavelet coefficient differences and multiresolution analysis", J. Struct. Control Health Monit., 25(1), e2041. https://doi.org/10.1002/stc.2041   DOI
16 Yang, W.Q., Stott, A.L., Beck, M.S. and Xie, C.G. (1995a), "Development of capacitance tomographic imaging systems for oil pipeline measurements", Rev. Sci. Instrum., 66(8), 4326. https://doi.org/10.1063/1.1145322   DOI
17 Daoye, Y., Bin, Z., Chuanlong, X., Guanghua, T. and Shimin, W. (2009), "Effect of pipeline thickness on electrical capacitance tomography", Proceedings of the 6th International Symposium on Measurement Techniques for Multiphase Flows, Journal of Physics: Conference Series, 147, 1-13, Okinawa, Japan, December.
18 ANSYS Low-Frequency Electromagnetic analysis Guide, The Electrostatic Module in the Electromagnetic subsection of ANSYS (2015), ANSYS, inc. Southpointe 275 Technology Drive Canonsburg, PA 15317, USA.
19 Asencio, K., Bramer-Escamilla, W., Gutierrez, G. and Sanchez, I. (2015), "Electrical capacitance sensor array to measure density profiles of a vibrated granular bed", J. Powder Technol., 270, 10-19. https://doi.org/10.1016/j.powtec.2014.10.003   DOI
20 Buhmann, M.D. (2003), Radial Basis Functions: Theory and Implementations, Cambridge University Press, Cambridge, UK.
21 Fasching, G.E. and Smith, N.S. (1988), "High resolution capacitance imaging system", US Dept. Energy, 37, DOE/METC-88/4083.
22 Fasching, G.E. and Smith, N.S. (1991), "A capacitive system for 3-dimensional imaging of fluidized-beds", Rev. Sci. Instr., 62(9), 2243-2251. https://doi.org/10.1063/1.1142343   DOI
23 Jaworski, A.J. and Bolton, G.T. (2000), "The design of an electrical capacitance tomography sensor for use with media of high dielectric permittivity", Meas. Sci. Technol., 11(6), 743-757. https://doi.org/10.1088/0957-0233/11/6/318   DOI
24 Zhao, Y., Noori, M., Altabey, W.A., Ramin, G. and Wu, Z. (2019a), "Applying neural networks for tire pressure monitoring systems", Struct. Durab. Health Monit., 13(1), 85-103. http://dx.doi.org/10.32604/sdhm.2019.04695   DOI
25 Al-Tabey, W.A. (2010), "Effect of pipeline filling material on electrical capacitance tomography", Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010), Perlis, Malaysia, October.
26 Ghiasi, R., Ghasemi, M.R., Noori, M. and Altabey, W. (2019), "A non-parametric approach toward structural health monitoring for processing big data collected from the sensor network", Structural Health Monitoring 2019: Enabling Intelligent Life-Cycle Health Management for Industry Internet of Things (IIOT) - Proceedings of the 12th International Workshop on Structural Health Monitoring (IWSHM 2019), Stanford, CA, USA, September.
27 Zhao, Y., Noori, M., Altabey, W.A. and Awad, T. (2019b), "A comparison of three different methods for the identification of hysterically degrading structures using BWBN model", Front. Built Environ., 4(80), 1-19. http://dx.doi.org/10.3389/fbuil.2018.00080
28 Al-tabey, W.A. (2014), "Vibration analysis of laminated composite variable thickness plate using finite strip transition matrix technique", In: MATLAB Verifications MATLAB-Particular for Engineer (Kelly, B., Ed.), InTech, USA, Volume 21, pp. 583-620. (ISBN 980-953-307-1128-8) https://doi.org/10.5772/57384
29 Altabey, W.A. (2016a), "Detecting and predicting the crude oil type inside composite pipes using ECS and ANN", Struct. Monit. Maint., Int. J., 3(4), 377-393. http://dx.doi.org/10.12989/smm.2016.3.4.377
30 Huang, S.M., Plaskowski, A.B., Xie, C.G. and Beck, M.S. (1989), "Tomographic imaging of two-flow component flow using capacitance sensor", J. Phys. E: Sci. Instrum., 22,173-177. https://doi.org/10.1088/0022-3735/22/3/009   DOI
31 Jiang, S., Li, D., Zhou, C. and Zhang, L. (2014), "Capabilities of stochastic response surface method and response surface method in reliability analysis", Struct. Eng. Mech., Int. J., 49(1), 111-128. http://dx.doi.org/10.12989/sem.2014.49.1.111   DOI
32 Kost, A., Altabey W.A., Noori, M. and Awad, T. (2019), "Applying neural networks for tire pressure monitoring systems", Struct. Durab. Health Monit., 13(3), 247-266. http://dx.doi.org/10.32604/sdhm.2019.07025   DOI
33 Li, H. and Huang, Z. (2000), Special Measurement Technology and Application, Zhejiang University Press, Hangzhou, China.
34 Mohamad, E.J., Rahim, R.A., Leow, P.L., Rahiman, M.H.F., Marwah, O.M.F., Nor Ayob, N.M., Rahim, H.A. and Mohd Yunus, F.R. (2012), "An introduction of two differential excitation potentials technique in electrical capacitance tomography", Sensor. Actuat. A, 180, 1-10. https://doi.org/10.1016/j.sna.2012.03.025   DOI
35 Altabey, W.A. (2017b), "A study on thermo-mechanical behavior of MCD through bulge test analysis", Adv. Computat. Des., Int. J., 2(2), 107-119. https://doi.org/10.12989/acd.2017.2.2.107
36 Altabey W.A. (2016b), "FE and ANN model of ECS to simulate the pipelines suffer from internal corrosion", Struct. Monit. Maint., 3(3), 297-314. http://dx.doi.org/10.12989/smm.2016.3.3.297   DOI
37 Altabey, W.A. (2016c), "The thermal effect on electrical capacitance sensor for two-phase flow monitoring", Struct. Monit. Maint., Int. J., 3(4), 335-347. http://dx.doi.org/10.12989/smm.2016.3.4.335
38 Altabey, W.A. (2017a), "An exact solution for mechanical behavior of BFRP Nano-thin films embedded in NEMS", J. Adv. Nano Res., Int. J., 5(4), 337-357. https://doi.org/10.12989/anr.2017.5.4.337
39 Altabey, W.A. (2017c), "Free vibration of basalt fiber reinforced polymer (FRP) laminated variable thickness plates with intermediate elastic support using finite strip transition matrix (FSTM) method", J. Vibroeng., 19(4), 2873-2885. https://doi.org/10.21595/jve.2017.18154   DOI
40 Al-Tabey, W.A. (2012), Finite Element Analysis in Mechanical Design Using ANSYS: Finite Element Analysis (FEA) HandBook For Mechanical Engineers With ANSYS Tutorials, LAP Lambert Academic Publishing, Germany (ISBN 978-3-8454-0479-0)
41 Sardeshpande, M.V., Harinarayan, S. and Ranade, V.V. (2015), "Void fraction measurement using electrical capacitance tomography and high speed photography", J. Chem. Eng. Res. Des., 9(4), 1-11. https://doi.org/10.1016/j.cherd.2014.11.013   DOI
42 Mohamad, E.J., Rahim, R.A., Rahiman, M.H.F., Ameran, H.L.M., Muji, S.Z.M. and Marwah, O.M.F. (2016), "Measurement and analysis of water/oil multiphase flow using electrical capacitance tomography sensor", J. Flow Meas. Instrum., 47, 62-70. https://doi.org/10.1016/j.flowmeasinst.2015.12.004   DOI
43 Mouritz, A.P. (2003), "Non-destructive evaluation of damage accumulation", Chapter 8 - Fatigue in Composites, (B. Harris), A volume in Woodhead Publishing Series in Composites Science and Engineering. (ISBN: 978-185573-608-5)
44 Altabey, W.A. (2017d), "Prediction of natural frequency of basalt fiber reinforced polymer (FRP) laminated variable thickness plates with intermediate elastic support using artificial neural networks (ANNs) method", J. Vibroeng., 19(5), 3668-3678. https://doi.org/10.21595/jve.2017.18209   DOI
45 Altabey, W.A. (2017e), "Delamination evaluation on basalt FRP composite pipe of electrical potential change", Adv. Aircr. Spacecr. Sci., Int. J., 4(5), 515-528. http://dx.doi.org/10.12989/aas.2017.4.5.515
46 Myers, R. and Montgomery, D.C. (2002), Response surface methodology process and product optimization using designed experiments, (2nd Ed.), Wiley-Interscience, New York, USA
47 Noori, M., Wang, H., Altabey, W.A. and Silik, A.I.H. (2018), "A modified wavelet energy rate-based damage identification method for steel bridges", Sci. Iran. Trans B: Mech. Eng., 25(6), 3210-3230. https://doi.org/10.24200/sci.2018.20736
48 Pei, T. and Wang, W. (2009), "Simulation analysis of sensitivity for electrical capacitance tomography", Proceedings of 9th International Conference on Electronic Measurement & Instruments (ICEMI 2009), Beijing, China, August.
49 Todoroki, A., Tanaka, Y. and Shimamura, Y. (2004), "Multi-prove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces", Compos. Sci. Technol., 64(5), 749-758. https://doi.org/10.1016/j.compscitech.2003.08.004   DOI
50 Valle, Y., Venayagamoorthy, G.K., Mohagheghi, S., Hernandez, J. and Harley, R.G. (2008). "Particle swarm optimization: basic concepts, variants and applications in power dystems", IEEE Trans. Evol. Comput., 12(2), 171-195. https://doi.org/10.1109/TEVC.2007.896686   DOI